ARGENTA PLUS (ENL)
12Pages

ARGENTA PLUS (ENL) IP55 steel floor-standing combinable cabinets The IP55 floor-standing combinable cabinets series is intended for the most professional sector, manufactured with high quality materials, are available in opaque and transparent door reaching a height up to 2200 mm. The profiles internally used are patended, give the cabinet the stability need to link cabinets together. The possibility of installing any type of electrical devices give this serie the maximum versatility. COMBINABLE (ENL) Technical Specifications - Degree of protection: Single-door cabinets: IP55 / NEMA 1, 12. Double-door cabinets: IP55 / NEMA 1, 12. - Resistance to impact: Enclosure and opaque doors: IK10. Transparent doors: IK09. - Ambient temperature range: -25 °C / +40 °C. IP55-IP65 Floor-standing cabinets Certifications Compliant with the Low Voltage Directive 2014/35/EU. Standards: UNE-EN 62208 and UNE-EN 61439-1 (as applicable). UL508A and Gost-R certificates. VDE Certificate available for single-door cabinets.

ARGENTA PLUS COMBINABLE (ENL) IP55 steel floor-standing combinable cabinets Product series - Opaque and transparent door cabinets without mounting plate. - Single door up to width of 1000 mm. - Double door as of width of 1000 mm. - Height: 1650 - 1800 - 2000 - 2200 mm. - Width: 600 - 800 - 1000 - 1200 - 1600 mm. - Depth: 400 - 500 - 600 - 800 - 1000 mm. Supply Assembled - Supplied on pallets, protected with honeycomb cardboard corner pieces and shrink-wrap film. - The plate and the side panels (if ordered) are supplied attached to the outside of the cabinet on the same pallet. - Including:...

Enclosure - Tubular structure that affords the unit great solidity. - Insides with square and round cut-outs for fitting accessories. Distance between cut-outs is 25 mm. - Flat outsides with cut-outs for fixing doors and panels. - Profiles with parts welded internally to guarantee maximum rigidity and yield strength. - Reversible in all directions. Side panels - Rear panel - Made from sheet with a thickness of 1.5 mm. - Sealing gasket to guarantee IP55 protection. - M6 countersunk screws for attachment. - Side panels: Supplied as an accessory to facilitate cabinet combination. - Rear panel:...

ARGENTA PLUS COMBINABLE (ENL) IP55 steel floor-standing combinable cabinets Glass door with transparent panel OPAQUE TRANS. WIDTH X DEPTH HEIGHT X WIDTH PO PT 370x410 1436x430 PO PT 370x510 1436x430 PO PT 570x410 1436x630 PO PT 570x510 1436x630 PO 770x410 PO 770x510 PO PT 370x310 1586x430 PO PT 370x410 1586x430 PO PT 370x510 1586x430 PO PT 570x310 1586x630 PO PT 570x410 1586x630 PO PT 570x510 1586x630 PO 770x310 PO 770x410 PO 770x510 PO PT 370x310 1786x430 PO PT 370x410 1786x430 PO PT 370x510 1786x430 PO PT 370x710 1786x430 PO PT 370x910 1786x430 PO PT 570x310 1786x630 PO PT 570x410...

IP 55 Double-door cabinets without mounting plate. Rolled steel. IP55 Combinable. Assembled Glass door with transparent panel OPAQUE TRANS. WIDTH X DEPTH HEIGHT X WIDTH PO PT 770x410 1436x420 PO PT 770x510 1436x420 PO PT 970x410 1436x620 PO PT 970x510 1436x620 PO PT 770x310 1586x420 PO PT 770x410 1586x420 PO PT 770x510 1586x420 PO PT 970x310 1586x620 PO PT 970x410 1586x620 PO PT 970x510 1586x620 PO 1370x310 PO 1370x410 PO PT 770x310 1786x420 PO PT 770x410 1786x420 PO PT 770x510 1786x420 PO PT 770x710 1786x420 PO PT 970x310 1786x620 PO PT 970x410 1786x620 PO PT 970x510 1786x620 PO PT 970x710...

IP55 steel floor-standing combinable cabinets PACK 1: Vertical uprights. IP55 Combinable. Packs Reference No. For cabinet Pack MATERIAL: Tubular structure, giving the product a great robustness. CHARACTERISTICS: Pack of 4 vertical profiles. The inner sides have rectangular and round cut-outs to fix accessories. The outer sides are flat with cut-outs to fix doors and panels. Fully reversibles. PACK 2: Bottom frame and top frame (with roof). IP55 Combinable. Packs MATERIAL: Top and bottom lid made in RAL 7035 painted sheet steel, with a thickness of 1.5 mm. With sealing gasket to guarantee...

1 Unit 1 Unit 1 Unit 1 Unit 1 Unit 1 Unit 1 Unit 1 Unit 1 Unit 1 Unit 1 Unit 1 Unit 1 Unit 1 Unit 1 Unit 1 Unit 1 Unit 1 Unit 1 Unit 1 Unit 1 Unit 1 Unit ARGENTA PLUS MATERIAL: Made in 1.5 -mm thick cold-rolled steel primed and painted RAL 7035, with sealing gasket to guarantee IP protection. CHARACTERISTICS: It includes rear panel with supports, M6 countersunk screws and washers for attachment. 2 Units 2 Units 2 Units 2 Units 2 Units 2 Units 2 Units 2 Units 2 Units 2 Units 2 Units 2 Units 2 Units MATERIAL: Made in 1.5 -mm thick cold-rolled steel primed and painted RAL 7035, with sealing...

Reference No. HEIGHT WIDTH MATERIAL: Cold -rolled steel with a thickness of 2 mm, primed and painted RAL 7035. CHARACTERISTICS: It includes door, reinforcement profiles, lock elements, hinges and door retainers. They feature a 4-point lock, double-bit insert with retractable handle in RAL 7016 grey. Doors with 120° opening, reversible. Check availability for transparent doors. MATERIAL: Cold -rolled steel with a thickness of 2 mm, primed and painted RAL 7035. CHARACTERISTICS: Two doors per reference are supplied, lock elements, hinges and door retainers. They include double lock; Interior:...

PACK 1: VERTICAL UPRIGHTS PACK 2: PACK 3:BOTTOM AND TOP FRAMES REAR PANEL The four profiles are supplied in pack and protected by cardboard. Lids are screwed in the bottom frame. Top and bottom lids are protected by a cardboard pad. The corners are protected by cardboard corner pieces. The whole set is film shrink-wrapped. Packed and protected by a cardboard pad. Between the panel and the cardboard pad, EPS HD strips are placed to avoid deformations, at the top, at the bottom and onto the rear side along the panel. The whole set is film shrink-wrapped. ARGENTA PLUS PACK 4: PACK 5:SIDE...

Single door Front Side section Mounting plate Ground plan Ground plan section 10 ARGENTA PLUS SERIES

IP 55 Dimensions: Argenta Plus CombinabLe Double door Front Side section Mounting plate ARGENTA PLUS Ground plan section IP55-IP65 STEEL FLOOR-STANDING CABINETS 11