ARGENTA PLUS ENL - PACKS
6Pages

IP55 Steel Floor-Standing Combinable Cabinets The IP55 steel floor-standing combinable cabinets serie gives the possibility to be supplied in packs, thereby optimizing the handling and transport of these big-size cabinets. Intended for the most professional sector and manufactured with high-quality materials, this serie is designed to offer the maximum versatility. NOW SUPPLIED IN PACKS Technical specifications - Degree of protection: Single-door cabinets: IP55 / NEMA 1, 12. Double-door cabinets: IP55 / NEMA 1, 12. - Resistance to impact: Body and opaque door: IK10. Transparent doors: IK09. - Ambient temperature range: -25 ºC / +40 ºC. - Maximum temperature for sealing gasket: 80 ºC. - Maximum temperature for polyester paint: 125 ºC. Compliant with the Low Voltage Directive 2014/35/EU. Standards: UNE-EN 62208 and UNE-EN 61439-1 (as applicable). UL508A and Gost-R certificates

Reference For cabinet Pack Reference HEIGHT PV1650 1650 4 Units MATERIAL: Tubular structure, giving the product a great robustness. CHARACTERISTICS: Pack of 4 vertical profiles. The inner sides have rectangular and round cut-outs to fix accessories. The outer sides are flat with cut-outs to fix doors and panels. Fully reversibles. MATERIAL: Top and bottom lid made in RAL 7035 painted sheet steel, with a thickness of 1.5 mm. With sealing gasket to guarantee the IP protection. Cable entry lid made in 2-mm thick galvanised steel. CHARACTERISTICS: It includes upper and lower...

MATERIAL: Made in 1.5-mm thick cold-rolled steel sheet, RAL 7035 paint, with sealing gasket to guarantee IP protection. CHARACTERISTICS: 2 -panel pack. It includes M6 countersunk fixing. Link your cabinets and order only the side panels you need. MATERIAL: Made in 1.5-mm thick cold-rolled steel sheet, RAL 7035 paint, with sealing gasket to guarantee IP protection. CHARACTERISTICS: It includes rear panel with supports, M6 countersunk screws and washers for attachment.

PACK 5: DoorsSingle opaque doors Double opaque symmetrical doorsReference For cabinet Reference For cabinetHEIGHT WIDTH PO16560 1650 600 MATERIAL: RAL 7035 cold-rolled steel sheet with a thickness of 2 mm. CHARACTERISTICS: Two doors per reference are supplied, lock elements, hinges and door retainers. They include double lock; Interior: 2-point 'k turn. Exterior: 4-point double-bit insert with retractable handle in RAL 7016 grey. Doors with 120° opening, reversible. Check availability for symmetrical and assymetrical transparent double doors. MATERIAL: RAL 7035...

MATERIAL: Galvanised steel sheet with a thickness of 3 mm. CHARACTERISTICS: Reinforced with C-shaped folds. Depth adjustable. 12.5-mm adjustment. The 1600-mm wide plates consist of an assembly of two 750-mm plates joined together. Maximum load on plate: 600 Kg. It includes 4 adjustable supports for installation. iP55 STEEL FLOOR-STANDiNG CABiNETS

PACK 1: PACK 2: PACK 3:VERTICAL PROFILES HORIzONTAL ELEMENTS REAR PANEL The four profiles are supplied in pack and protected by cardboard. Lids are screwed in the bottom frame. Top and bottom lids are protected by a cardboard pad. The corners are protected by cardboard corner pieces. The whole set is film shrink-wrapped. Packed and protected by a cardboard pad. Between the panel and the cardboard pad, EPS HD strips are placed to avoid deformations, at the top, at the bottom and onto the rear side along the panel. The whole set is film shrink-wrapped. PACK 4: SIDE PANELS Packed...