ID-921B HAPTM Hazardous Area Personnel Test Meter ID-921B - Hazardous Area Personnel Test Meter The IDB Model ID-921B is a battery-powered HAPTM tester, which provides a simple and reliable means for screening personnel working within hazardous environments for the effectiveness of their conductive footwear and wrist straps to avoid the potential accumulation of electrostatic charge. The equipment can be used for testing the integrity of both wrist straps as well as conductive footwear and holds an IP65 rating with an equipment protection levels of Db, (zones 21 and 22) and Gc (zone 2) Sensitive or hazardous areas may occur in the explosives, chemical, petrochemical and plastics industries in the handling of solvents and hydrocarbon fuels. SPECIFICATIONS & FEATURES The ID-921B is supplied with an IP65 rating, and is also supplied with ATEX certification. Test Voltage: 12V maximum 100V maximum* Configurable at factory Resistance limit (Conductive): Resistance limit (Antistatic): Ingress Protection: It has a TFT display indicating the resistance measurement and is capable of measuring both wrist straps and footwear. Power Supply: The ID-921B HAPTM tester has been designed to meet the resistive limits described in MOD JSP482 and can be pre-configured to the requirements of either an antistatic or conductive regime. IDB Systems operate a calibration and maintenance support service details of which can be tailored to meet individual customer preferences. Our engineering consultants would be pleased to discuss your requirements with you, and we invite you to contact our team at [email protected], alternatively call us on +44 (0) 1492 864 126. * Zones 21 & 22 Only IDB Systems Limited is registered in England and Wales under 7324859 and the registered office is 10 Mostyn Street, Llandudno, LL30 1PS, Conwy, North Wales. ©IDB Systems 2011-2021 ID921B-1DS I