INDUSTRIA CHIMICA REGGIANA TECHNICAL SHEET H69 VANTIX CLEAR UHS UHS 2K Acrylic Clearcoat Completely new to the field of car-repair clearcoats due A) DESCRIPTION AND FIELDS OF APPLICATION: to the product’s rheological properties that notably prevent sagging while ensuring excellent spread. Other main features include: ease of application, excellent spreading, high gloss and fast drying time. It is especially suitable for bodyshop repair work using waterbourne base coats as it cuts effects caused by the absorption of these latter. The EU VOC limit for this product ready-to-use (product category IIB(d)) is 420 g/l. B) TECHNICAL DATA: Composition Hydroxylated acrylic resins 0,975 ± 0,03 kg/l Colourless, transparent Refer to the safety sheet Specific weight Available colours Safety data C) SURFACE PREPARATION : * Matt base coat for two coats of solvent-based paint * Matt base coat for two coats of water-based paint D) CAUTIONS: * Mix well before use. * Comply with the application ratios. * Do not use the product at temperatures below 10°C. * Keep in a cool, dry place. INDUSTRIA CHIMICA REGGIANA - I.C.R. S.p.A. 42124 Reggio Emilia - Via M. Gasparini, 7 - Tel. +39 0522 517803 - Fax +39 0522 514384 - e-mail: [email protected] - www.icrsprint.it Uff. Comm.le Italia: 42124 Reggio Emilia - Via Neviani, 5 - Tel. +39 0522 517803 - Fax +39 0522 231819 International Department: 42124 Reggio Emilia - Via Neviani, 5 - Tel. +39 0522 513738 -Fax +39 0522 512446 Stabilimento: 42124 Reggio Emilia Via M.Gasparini, 7 - Tel. +39 0522 517803 - Fax +39 0522 514384 Stabilimento: 26817 S. Martino in Strada (LO) - Via del Commercio, 1 - Tel. +39 0371 475313 - Fax +39 0371 475370 CAPITALE SOC. € 557.820,00 – R.E.A. N. 82109 M. R.E. 000534 - Reg. Imprese, COD. FISC. e PART. IVA 00140910357

INDUSTRIA CHIMICA REGGIANA E) PROCESSING: 2:1 with C63/C67/C68/C69 Hardener, potlife 45’ at 20°C. Do not dilute. 18" DIN 4 a 20°C. 1,3-1,4 mm 2,5-3,5 bar Apply a light coat followed by a full coat to obtain a final dry thickness of 50 – 60 micron. 1,4-1,5 mm 3-4 bar 1+1/2 = 50-60 micron 5'-10' at 23°C : Time Dryng : 7-8 h. Buffing Time: 15-16 h at 60°C : Time Dryng : 25'. Buffing Time : 30' after cooling. 12' at 1 mt. F)TOOLS CLEANING: * With thinner for polyurethane products Technical indications and advices are based on our own experiences. We assure the perfect quality of products. However,...