Remote I/O Modules and I/O Expansion Units Product Catalog
Remote I/O Modules and I/O Expansion Units Product Catalog
- Overview: ICP DAS offers a variety of remote I/O modules and expansion units for industrial monitoring and control, compatible with multiple communication interfaces like RS-485, Ethernet, and more.
- Related PAC: The PAC family includes modular systems like XPAC, WinPAC, and others, supporting applications such as data acquisition and process control.
- Overview: RS-485 I/O products like the I-7000 and M-7000 modules offer cost-effective solutions for industrial control systems, supporting DCON and Modbus RTU protocols.
- Features: These modules provide programmable power-on values, overvoltage protection, and are designed for rugged environments.
- InduSoft: A toolset for developing HMI and SCADA systems, integrating with ICP DAS products.
- ISaGRAF: A SoftLogic package for PLC-like applications, supporting real-time data acquisition.
Thermocouples are temperature sensors operating on the Seebeck effect, used for their accuracy and wide temperature range capabilities.
Lists various thermocouple types with temperature ranges and specifications for input modules.
Designed for harsh environments with features like overvoltage protection and ESD compliance.
RTDs measure temperature by correlating resistance with temperature, preferred in high electrical noise environments.
Thermistors are resistors with temperature-dependent resistance, used as sensors and inrush current limiters.
Support various voltage and current inputs for precise measurements.
Measure strain using a Wheatstone bridge circuit, with specifications for input modules.
Provide analog outputs with features like resolution and accuracy, used for monitoring applications.
The document provides comprehensive specifications for input and output modules designed for industrial environments, offering high accuracy and reliability.
- Power Input: 10 ~ 30 VDC
- Power Consumption: Varies by module
- Isolation: Up to 5000 Vrms
- ESD Protection: ±4 kV
- EFT Protection: ±4 kV
- Surge Protection: Up to ±3 kV
- Dual Watchdog: Ensures reliability by resetting the microprocessor or monitoring host communication.
- Programmable Power-on and Safe Values: Configures output states during power-on and communication failure.
- Advanced DI Functions: Includes DI latch function and low-speed counter.
- Relay Output Modules: Equipped with power relays and surge strength specifications.
- Solid-State Relay Output Modules: Features AC-SSR and DC-SSR types.
- PhotoMos Relay Output Modules: Provides high isolation and fast operation times.
- Counter/Frequency/PWM Modules: Supports various counter modes and PWM functionalities.
- For industrial use, choose the "P" version of digital input modules for enhanced performance.
- Install flyback diodes for DC loads or metal oxide varistors for AC loads to prevent damage from inductive loads.
The document provides detailed information about the tM Series Modules, designed for remote control through an RS-485 serial bus using DCON and Modbus RTU/ASCII protocols.
The tM Series supports various I/O types, featuring dual watchdogs for reliability and safety.
- Cost-effective with low channel count design.
- Supports Modbus RTU and DCON protocols.
- Photocoupler isolation and isolated digital input/output.
- RS-485 bus supports baud rates up to 115,200 bps.
- Dual watchdog design with programmable power-on and safe values.
- Wide operating temperature range: -25 to +75°C.
- RoHS compliant and made from fire-retardant materials.
The tM Series is suitable for various applications, including industrial machinery and automation.
Lists several models within the tM Series with specific I/O configurations.
Designed for easy DIN-rail mounting with LED indicators for power and status.
The RU-87Pn series is highlighted for its ability to acquire and control remote I/O through RS-485 connections.
- Features: Includes one RS-485 port for multi-drop topology, hot swap capability, and DCON protocol support.
- Specifications: Maximum baud rate of 115200 bps, maximum distance of 1.2 km, and 3000 VDC isolation.
- Ordering Information: Models include RU-87P1, RU-87P2, RU-87P4, and RU-87P8.
- Features: Provides switch-selectable bias resistors and a 15-step switch-selectable termination resistor.
- Specifications: Operating temperature range of -25 to +75°C.
- Self-Tuner Chip: Automatically tunes baud rate and data format.
- High Quality Isolated RS-485 Repeater/Hub/Splitter: Extends maximum effective distance by 1200m.
- Overview: Ethernet remote I/O modules support Modbus TCP and UDP protocols, with web HMI and security features.
- Modbus TCP I/O Expansion Unit (ET-87Pn-MTCP): Supports daisy-chain topology with two Ethernet ports.
- ET-7000/PET-7000 Series: Web-based Ethernet I/O modules with built-in web server.
- Power over Ethernet (PoE): Simplifies installation by using a single Ethernet cable for both power and data.
- Communication Security: Includes account/password protection and IP address filtering.
- Protocol Support: Compatible with Modbus TCP and Modbus UDP protocols.
- Built-in I/O: Offers a mix of analog and digital I/O channels.
- Dual Watchdog: Ensures reliable communication with the host.
- Web HMI and Server: Allows users to create web pages for monitoring and controlling I/O points.
- Environmental Robustness: Operates in a wide temperature range (-25 to +75°C).
- Analog Inputs: Configurable for various voltage and current ranges.
- Digital Inputs/Outputs: Supports multiple channels with options for wet and dry contact configurations.
- Relay Outputs: Includes power relays with significant load capacity.
- Isolation and Protection: Features high-level isolation and protection against ESD, EFT, and surge.
- OPC Server: NAPOPC_ST DA Server facilitates data integration with SCADA/HMI systems.
- EZ Data Logger: A user-friendly software for building small SCADA systems.
- Development Toolkits: Provides libraries and demo programs for software development.
- Built-in Web Server and Web HMI for remote management.
- Support for Modbus TCP and UDP protocols.
- Communication security with ID, password, and IP filter.
- Dual watchdog timers for module and communication.
- Wide operating temperature range from -25°C to +75°C.
- I/O Pair Connection capability.
- ET-7044/PET-7044/PET-7044-48V: 8 digital input and 8 digital output channels with optical isolation.
- ET-7050/PET-7050/PET-7050-48V: 12 digital input and 6 digital output channels.
- ET-7051/PET-7051/PET-7051-48V: 16 digital input channels with optical isolation.
- ET-7052/PET-7052/PET-7052-48V: 8 digital input and 8 digital output channels.
- Ethernet Port: 10/100 Base-TX with Auto MDI/MDI-X.
- Power Options: Terminal block and PoE.
- Isolation: 1500 VDC for Ethernet and 3750 Vrms for I/O.
- EMS Protection: ESD and EFT standards compliance.
- Mechanical Dimensions: Suitable for DIN-Rail or wall mounting.
- Environmental Conditions: Operating temperature -25°C to +75°C.
The document provides technical specifications and features of various Ethernet I/O products from the ET-7000/PET-7000/PET-7000-48V series.
- ET-7052: Offers 16 dry contact digital input channels with optical isolation.
- ET-7053: Similar to ET-7052 but includes PoE options.
- ET-7055: Provides 8 wet contact digital input channels and 8 source-type digital output channels.
- ET-7060: Features 6 wet contact digital input channels and 6 power relay outputs.
- ET-7062: Offers 6 wet contact digital input channels and 2 power relay outputs.
Features
All models include a built-in web server, support for Modbus TCP and UDP protocols, and dual watchdog timers.
These modules offer various power input options, including PoE and terminal block inputs, with reverse polarity protection.
Suitable for industrial environments where hazardous voltages are present.
The document outlines the specifications for various Ethernet I/O products, including models ET-7062, PET-7062, PET-7062-48V, ET-7065, PET-7065, PET-7065-48V, ET-7066, PET-7066, PET-7066-48V, ET-7067, PET-7067, and PET-7067-48V.
The products feature built-in web servers, web HMI, support for Modbus TCP and Modbus UDP protocols, and dual watchdog.
- ET-7062/PET-7062/PET-7062-48V: 2-channel power relay output and 6-channel DI module.
- ET-7065/PET-7065/PET-7065-48V: 6-channel PhotoMOS relay output and 6-channel DI module.
- ET-7066/PET-7066/PET-7066-48V: 8-channel PhotoMOS relay output module.
- ET-7067/PET-7067/PET-7067-48V: 8-channel power relay output module.
Details on the electrical and mechanical life of the relays are provided.
Includes ordering information for each model and lists accessories such as unmanaged Ethernet switches.
- Specifications: Includes a built-in two-port Ethernet switch for daisy-chain topology.
- Features: Supports Modbus TCP and UDP protocols, has a built-in web server, and operates within a temperature range of -25 to +75°C.
- Models: The PEE-7060 and PEE-7060-48V models offer 6 DI channels and 6 form A electromechanical relays.
- Specifications: IP-based with fixed web interfaces for configuration.
- Features: Supports both polling and push modes for I/O data transfer.
- Applications: Suitable for distributed I/O points applications.
- Power Relay: 6 channels, Form A (SPST N.O.), operating voltage range of 250 VAC/30 VDC.
- Digital Input/Counter: 6 channels, supports both wet and dry contact.
- Environmental Specifications: Operating temperature range of -25 to +75°C.
The document provides a comprehensive guide on industrial computer products and data acquisition systems, focusing on Remote I/O Modules and CAN Bus Products.
- Digital Input Modules: Models offer channels with wet contact type and sink/source configuration.
- Digital Output Modules: Models provide channels with open collector type and power relay options.
CAN Bus Products
- CANopen and DeviceNet Modules: Include analog and digital I/O modules with features like heartbeat messaging.
- Analog Input/Output Modules: Provide multiple channels with high accuracy and resolution.
- Digital I/O Modules: Offer high isolation voltage and support for sink/source configurations.
Environmental and Mechanical Specifications
Designed for DIN-Rail mounting, with operating temperatures ranging from -25 to +75°C.
Modules support various baud rates and protocols, with power consumption ranging from 1.4 W to 3.36 W.
The document provides a comprehensive overview of HART communication protocol and its applications in industrial automation.
- Point-to-Point Mode: Utilizes both 4-20 mA current and digital signals.
- Multi-Drop Mode: Uses only digital signals with a fixed 4 mA current.
- Easy to understand and use, providing access to additional information.
- Compatible with standard wiring and supports simultaneous digital data transmission.
- HART Converters: Convert USB and serial interfaces to HART.
- HART Gateways: Facilitate communication between HART and other protocols.
- HART Modules: Provide current input and output capabilities.
Discusses the PMMS developed by ICP DAS for maximizing energy efficiency through power monitoring.
The document provides detailed specifications and features of the PMC-5141 series power meters and related accessories.
- Power Meters: Offer true RMS power measurements and energy analysis.
- Voltage Attenuators: Attenuate high voltage inputs to a manageable range.
- Current Transformers: Provide accurate current measurement capabilities.
- Clip-on CTs for easy installation.
- DIN-Rail mounting for compact setup.
Suitable for both low and medium/high voltage applications, providing real-time energy consumption data.
Includes a detailed selection guide for choosing the appropriate model.
Outlines the specifications for various industrial computer products and data acquisition systems.
Involves DIN-Rail mounting, with detailed dimensions and installation guidelines.
Suitable for various applications, including transportation of food or pharmaceuticals.
Comply with RoHS standards and offer ESD protection.
Utilize the advanced P2P function for networked WISE controllers.
WISE is a series of products developed by ICP DAS for remote logic control and monitoring in industrial applications.
- Seamless integration with SCADA systems using Modbus TCP/RTU Protocol.
- Power over Ethernet (PoE) for simplified system design.
WISE controllers come in various models to suit different industrial needs.
- Web-based rule configuration with support for 36 IF-THEN-ELSE logic rules.
Different models offer specific features such as LED displays and various I/O expansion options.
WISE modules provide a flexible and efficient solution for industrial control and monitoring.
Models WISE-7902 and WISE-7902D feature a 16-bit CPU and support Power over Ethernet (PoE).
Includes a built-in web server for setting IF-THEN-ELSE rules.
Allows for rule configuration via a web server.
Includes power supplies and Ethernet switches.
WISE products are designed for remote logic control and monitoring in industrial applications.
Supports I/O expansion and data logging with a microSD card.
WISE is a series of control units developed by ICP DAS for remote logic control and monitoring.
- CPU: 16-bit
- Memory: 768KB SRAM, 512KB Flash
- Built-in web server for rule setting
Allows configuration of logic rules with conditions based on DI/AI channels.
Various accessories are available, including signal conditioning modules.
Provides details on various models and accessories available for purchase.
TPM-4100 and TP-4100 Touch Panel Monitors:
- Display: 10.4" LCD with 800 x 600 resolution.
- Touch Panel: Resistive with RS-232 or USB interface.
- Display: 7" LCD with 800 x 480 resolution.
- Touch Panel: 4-wire analog resistive with RS-232 or USB interface.
Both models come with accessories such as power supply and VGA cable.
Details on installation methods such as panel mounting and VESA mounting are provided.
Catalog excerpts
Remote I/O Modules and I/O Expansion n Units 1.1. Overview - - - - - - - - - - - - - - - - - - - - 1.2. Related PAC - - - - - - - - - - - - - - - - - - - HART Products 7.1. HART Introduction & Products - - - - - - - RS-485 I/O Products 2.1. Overview - - - - - - - - - - - - - - - - - - - - 2.2. I-7000 and M-7000 Modules - - - - - - - 2.3. tM Series Modules - - - - - - - - - - - - - - 2.4. RS-485 I/O Expansion Unit - - - - - - - - 2.5. Termination Resistor/DC Bias Voltage - 2.6.RS-485 Converter/Repeater/Hub/Splitter Power Monitor and Management Solution on n Ethernet I/O Products 3.1. Overview...
Open the catalog to page 2
ICP DAS launches a series of remote I/O modules and I/O expansion units for industrial monitoring and controlling applications. The I/O modules are highly flexible and compatible , thus reduce your I/O modules inventory. Furthermore,various communication interfaces, such as RS-485, Ethernet, EtherCAT, EtherNet/IP, Profinet, FRnet, CAN bus, Profibus and Hart are available for PAC, PC and PLC. / DeviceNet/CANopen Network Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems
Open the catalog to page 4
Remote I/O Modules and I/O Expansion Units 1.2. Related PAC The PAC family of ICP DAS is a modular network-based PAC with the capablity of connecting I/O either through its own dual backplane bus or alternatively through remote I/O units and remote I/O modules. This new exciting PAC family offers a flexible, versatile and economical solution to a wide range of applications from data acquisition, process control, test and measurement, motion control to energy and building management. Our PAC family includes XPAC, WinPAC, ViewPAC, LinPAC, iPAC, ViewPAC, Motion PAC and μPAC for different requirements...
Open the catalog to page 5
1 Remote I/O Modules and I/O Expansion Units 5.7” TFT LCD with Touch Panel LCD I/O Expansion Software Development Tool 4.3” TFT LCD with Touch Panel 2.8” TFT LCD with Touch Panel 3.5” TFT LCD with Touch Panel , refer to PAC Product Catalog ,r refer to TouchPAD brochure ● Software Development Tool 1. ISaGRAF (SoftPLC Solution) ISaGRAF is a powerful SoftLogic package on the industrial market. ISaGRAF Workbench is a e ows PLC-like development software running on Windows 95/98/NT/2000/XP/Vista/7 and its ISaGRAF Runtime application programs can run on any ISaGRAF PACs such as WP-8xx7, VP-2xx7, XP-8xx7-CE6,...
Open the catalog to page 6
2.5. Termination Resistor/DC Bias Voltage
Open the catalog to page 7
Although RS-485 is a very old technology, it is still a good choice to establish a cost-effective remote I/O system. Our RS-485 remote I/O module supports DCON protocol, Modbus RTU/ASCII protocol. According to different application, we have developed various RS-485 I/O modules, such as palm-size I-7000/M-7000 series (Ch 2.2) and tiny-size tM series (Ch2.3). The module has diversied I/O interface, such as overvoltage-protection analog input module, relay output, digital input/output, counter, timer…etc. The brief comparison is as the following table. Besides those regular RS-485 I/O modules, we...
Open the catalog to page 8
Remote I/O Modules and I/O Expansion Units ● Applications Factory automation, machine automation, testing equipment, building automation, solar energy system, pollution monitoring system, heating chamber…etc I-7000 and M-7000 remote I/O modules provide cost-effective protection and conditioning for a wide range of valuable industrial control system. The product line includes sensor-tocomputer, computer-to-sensor, digital I/O, timer/ counter, RS232 to RS-485 converter, USB to RS-485 converter, RS-485 repeater, RS-485 hub and RS-232/422/485 to Fiber Optics. I-7000 supports DCON protocol, and M-7000...
Open the catalog to page 9
Advanced DI Functions DI channel is not only for reading digital input status but also provides several advanced functions in the meanwhile. ● DI Latch Function All DI channels provide Latch function to keep the high/low events in the internal registers of the module. In general, the host controller polls modules one by one to get all DI status. Because RS-485 is a low speed eld bus, the polling will take time and probably miss a short duration signal. With the DI latch function, the short duration (>=5ms) signal will not be lost any more. ● Low Speed Counter The DI module automatically counts...
Open the catalog to page 10
Remote I/O Modules and I/O Expansion Units Virtual Channel to Channel Isolation The “R” and “Z” version of analog input modules provide +/-400 VDC virtual channel to channel isolation to avoid the noise interference from adjacent channel in the industrial environment. To name a few of the modules, they are I-7017R, I-7017Z, I-7018R, I-7018Z, I-7019R, and I-7019Z. Though it is not real channel to channel isolation, there is only 1uA leakage current between two adjacent channels and the interference is very small and can be negligible. The typical application is to monitor the charging status of...
Open the catalog to page 11
Dual Communication Protocols All I-7000 and M-7000 modules use a simple command /response protocol for communication. M-7000 also supports the industrial standard Modbus RTU protocol. The user can use high-level language, such as C, VB, Delphi, and others to write their application programs. Some famous software package can control I-7000 and M-7000 directly, such as LabView, Indusoft, Tracemode, EZ data logger, EZ Prog..etc. I-7000: supports DCON protocol M-7000: supports Modbus RTU and DCON protocols Self-Tuner Inside "Self-Tuner" is a patented ASIC. It auto-tunes the baud rate and data format...
Open the catalog to page 12
Remote I/O Modules and I/O Expansion Units ● Software Support Our free charge software utility and development kit include 1. DCON Utility DCON Utility is used to search, configure and test simply the I-7000 and M-7000 modules via the serial port (RS-232/485). NAPOPC_ST DA Server is a free OPC DA Server ("OPC" stands for "OLE for Process Control" and "DA" stands for "Data Access") for ICP DAS products. Based on Microsoft's OLE COM (component object model) and DCOM (distributed component object model) technologies, NAPOPC_ST DA Server defines a standard set of objects, interfaces and methods for...
Open the catalog to page 13All ICP-DAS catalogs and technical brochures
TouchPAD36 Pages
CAN BUS32 Pages
UA series13 Pages
ISaGRAF μPAC-5000 series6 Pages
GT-5412 Pages
GTM -203M -3GWA2 Pages
G-4513 Series2 Pages
machine to machine solution12 Pages
Industrial Communication Products180 Pages
PAC Products Catalog216 Pages
Fieldbus catalogue120 Pages
Machine Automation catalogue79 Pages
Archived catalogs
New Products Highlight 200826 Pages
ISaGRAF Brochure282 Pages
Fieldbus Solution Brochure24 Pages
