ISaGRAF μPAC-5000 series
1 / 6Pages

Catalog excerpts

ISaGRAF μPAC-5000 series - 1

Features  80186, 80 MHz CPU  MiniOS7 Inside  Embedded ISaGRAF Ver.3 SoftLogic (IEC 61131-3)  Various Storage Media  512 KB Flash  16 KB EEPROM  512 KB Battery Backup SRAM  Various Communication Interface Options  10/100 Base-TX Ethernet  RS-232/485  GPS  2G (GPRS) / 3G (WCDMA)  64-bit Hardware Serial Number  I/O Expansion Bus  Redundant Power Inputs  Operating Temperature: -25 ~ +75°C ISaGRAF μPAC-5000(D) Series Introduction The ISaGRAF μPAC-5000 series (μPAC-5xx7, μPAC-5xx7D) is an enhanced version of palm-size μPAC. It provides ISaGRAF workbench for PLC user. Owing to the bigger and special form factor design, the μPAC-5xx7(D) can add an internal wireless module, such as 2G, 3G, ZigBee, GPS for different wireless application. The optional I/O expansion board, XW-board, is two times larger than the X-board of μPAC-7186 and provides high-protection I/O. For hardware expansion, it also supports an I/O expansion bus. The I/O expansion bus can be used to implement various I/O functions such as DI, DO, A/D, D/A, Timer/Counter, UART, and other I/O functions. Nearly all kinds of I/O functions can be implemented by this bus. But the bus can support only one board. There are more than 10 boards available for μPAC-5xx7(D) series, you can choose one of them to expand hardware features. The features of the ISaGRAF workbench Ver. 3.x include:  IEC 61131-3 Standard Open PLC Programming Languages (LD, FBD, SFC, ST, IL) + Flow Chart (FC) ,  Auto-scan I/O  Online Debug/Control/Monitor, Offline Simulation  Simple Graphic HMI Applications Rich I/O Expansion Ability Local I/O RS-232/422/485 FRnet XW-Board GPRS Cell Phone Professional Provider of High Quality Industrial Computer Products and

Open the catalog to page 1
ISaGRAF μPAC-5000 series - 2

Programmable Automation Controller Products Cost-effective Auto-ReportData Acquisition/Control System Provide 4-level Internet Security Protection Gateway Server in ISP Company Modbus RTU/ASCII Master Ports 2G/3G SMS: Short Message Service Alarm Message Send Email with one Attached File Modbus RTU/TCP Slave Ports Gateway Server in ISP Company SCADA Remote I/O Modules Website: http://www.icpdas.com E-mail: sales@icpdas.com

Open the catalog to page 2
ISaGRAF μPAC-5000 series - 3

● Common Specifications Models MiniOS7 (DOS-like embedded operating system) Development Software ISaGRAF Ver.3 ISaGRAF Software Languages Max. Code Size Scan Time IEC 61131-3 standard LD, ST, FBD, SFC, IL & FC 64 KB 2 ~ 25 ms for normal program; 10 ~ 125 ms (or more) for complex or large program CPU Module CPU SRAM Flash microSD Expansion Battery Backup SRAM 80186, 80 MHz 768 KB 512 KB Yes (but ISaGRAF doesn't support) 512KB ; data valid up to 5 years (for retain variables) 31 Bytes (battery backup, data valid up to 10 years) RTC (Real Time Clock) 64-bit Hardware Serial Number Watchdog...

Open the catalog to page 3
ISaGRAF μPAC-5000 series - 4

Programmable Automation Controller Products ISaGRAF Specifications Protocols (Note that certain protocols require optional devices) NET ID Modbus RTU/ASCII Master Protocol A max. of 2 COM ports: COM1, COM2 and COM3 (*). (To connect to other Modbus Slave devices) Max. Modbus_xxx Function Block amount for 2 ports: 128. Modbus RTU Slave Protocol A max. of 2 COM ports: COM1 and one of (COM2, COM3) (*). (For connecting ISaGRAF, PC/HMI/OPC Server and HMI panels.) Modbus TCP/IP Protocol Ethernet port supports Modbus TCP/IP Slave Protocol for connecting ISaGRAF & PC/HMI up to 6 connections....

Open the catalog to page 4
ISaGRAF μPAC-5000 series - 5

● Wireless Selection Guide Wireless Communication μPAC-5107(D) with GPS The Global Positioning System (GPS) is a space-based global navigation satellite system (GNSS) that provides reliable location and time information anytime and anywhere on the Earth when and where there is an unobstructed line of sight to four or more GPS satellites. The GPS is widely used for driving navigation, geographic monitoring, fleet management and cargo tracking, etc. We also can use GPS for industrial application according to its longitude and latitude value and UTC time. 32 channels all-in-view tracking...

Open the catalog to page 5
ISaGRAF μPAC-5000 series - 6

Programmable Automation Controller Products ISaGRAF μPAC-5000 Model Name Memory Expansion Wireless Communication microSD + 512 KB Battery Backup SRAM ISaGRAF based μPAC-5000 with LAN ISaGRAF based μPAC-5000 with LAN and GPS ISaGRAF based μPAC-5000 with LAN and 2G (GPRS) ISaGRAF based μPAC-5000 with LAN and 3G (WCDMA) Note: (D) means with 7-Segment LED Display. ISaGRAF Development Software ISaGRAF Workbench Software Ver.3 (256 I/O Tags) with One USB Dongle ISaGRAF Workbench Software Ver.3 (32 I/O Tags) Note: No upgrade service from ISaGRAF-32 to ISaGRAF-256 is available. (ISaGRAF-32 can be...

Open the catalog to page 6

All ICP-DAS catalogs and technical brochures

  1. TouchPAD

    36 Pages

  2. CAN BUS

    32 Pages

  3. UA series

    13 Pages

  4. GT-541

    2 Pages

Archived catalogs