ICP DAS has been developing rich CAN-based/DeviceNet/CANopen/J1939 products for more than 10 years, including PCI interface cards, Fieldbus converters, PACs, gateways and remote I/O modules. We provide complete hardware solutions to satisfy a wide variety of CAN-based applications that can effectively solve issues related of data acquisition and calculation, transmission distance extension, network topology limitations, communication interface transformation, and noise resistance. In addition, ICP DAS supplies a large ranges of software resource, such as utility tools, APIs, demo programs, OPC,...

U> Selection Guide Model Name

U> Case Studies Concrete Station Monitoring & Control System ■ Location: China ■ Product: PISO-CM100U ■ Description: The result of the quantity control for each recipe material seriously affects the quality of the concrete. In order to adjust each quantity promptly, CAN bus is applied. In this system, the PISO-CM100U is used to monitor the weight of each material from the load cells and send the recipe to the PLC. As the same time, the PC updates all the data on the screen. By utilizing the user-defined firmware in the CPU of the PISO-CM100U, the PC loading can be effectively reduced, and the...

Energy Storage System ■ Location: China ■ Product: I-8120W, I-8057W, VP-25W1, XP-8341 ■ Description: This system improves the usage efficiency of electrical power. During the off-peak time for electricity use, the unused electricity can be stored in batteries. During peak time, these batteries then supply power to the electricity grid. The user has utilized two I-8120W modules plugged in one VP-25W1 in each subsystem. One is for obtaining the battery status, and another is for transmitting the data to the XP-8341. The XP-8341 then transmits the status information to the PC via the Ethernet and...

2. CAN Bus Repeater/Bridge/Switch The CAN Bus Repeater/Bridge/Switch is used to enhance the signal quality, extend the communication distance, isolate CAN bus network. ICP DAS provides following products. Model Name

3. USB to CAN Converters The I-7565 series is the USB to CAN converter with a maximum of two independent CAN channels that supports CAN protocols 2.0A and 2.0B. It becomes very convenient and easy to access and control the CAN devices via the USB port of the PC. The I-7565-H1 is a high-performance intelligent USB to CAN converter with one CAN port that can help users to make data collection and process on a CAN bus network easily and quickly. It improves the transformation speed of the I-7565, and allows receiving max. 3000 standard 2.0A CAN frames per second. The powerful CPU of the I-7565-H1...

High Speed USB to 2-port CAN Bus Converter I-7565M-HS I-7565M-HS is a high speed USB to CAN converter with two CAN channels. It improves the transformation speed of other I-7565 series, and allows receiving max. 15000 standard 2.0A CAN frames per second. I-7565M-HS support CAN2.0A/2.0B protocol and different baud rates from 10 kbps to 1000 kbps. The important feature of I-7565M-HS is to support the user-defined baud rate function no matter what the baud rate is. When connecting I-7565M-HS to PC, PC will load the relevant device driver automatically (hot plug & play). Therefore, users can make...

■ Fully compatible with the ISO 11898-2 standard ■ Support both CAN 2.0A and CAN 2.0B ■ NXP TJA1042 CAN transceiver ■ Wave Length: 1310 nm ■ 2500 Vrms isolation on the CAN side CAN Bus Products BrochureCAN to Single-mode Fiber Bridge The I-2533CS series (I-2533CS/I-2533CS-60) is a local CAN bridge used to establish a connection between two CAN bus systems via single mode fiber transmission medium. In order to solve the problem between CAN and fiber transmission mediums, the I-2533CS series is specially designed for converting the electrical CAN bus signal to the optical signal- and recover the...

5. Ethernet/Wi-Fi to CAN Converters Model Name Modbus TCP to CAN Converter I-7540D-MTCP Inheriting to the most of all features of the I-7540D, the I-7540D-MTCP enables CAN networks to be combined with the Internet/Ethernet. It can be used to not only access the CAN network via the Ethernet, but can also realize Ethernet transparent transmission on the CAN network. In order to connect the PLCs, HMIs and SCADAs with the CAN devices more easily and conveniently, the I-7540D-MTCP supports the Modbus TCP and Modbus RTU communication protocol. This module can act as a Modbus TCP server, and wait for...

ECAN-240 is a ethernet to CAN two ports gateway. Users can communicate with different CAN networks at the same time. In order to be used more easily in industry, the ECAN-240 supports Modbus TCP client and Modbus TCP server function. Users can choose one of them for fitting their application. Furthermore, the two CAN ports have different purposes according to their usages. For example: In pair connection mode, the different CAN networks can be communicated with each other via module configuration. ■ Fully compatible with the ISO 11898-2 standard ■ Includes built-in DIP-switch the can be used...

The I-7540D is a CAN to Ethernet converter, and is usually applied as an Ethernet to CAN/RS-232/485 device server. It supports socket access functions and virtual COM port technology which helps users to get the CAN, RS-232, RS-485 data via virtual COM port. The I-7540D also provides transparent mode, which enables CAN networks to be coupled together over the Internet/Ethernet, whereby remote monitoring and control is possible. By the features of tiny operating system, protocol independence, small casing and flexibility, it is able to widely fit various RS-232, RS-485 and CAN applications, which...

The I-7530 series is the UART to CAN converter that support CAN protocols 2.0A and 2.0B. The I-7530-FT is designed for the fault tolerance CAN bus (ISO 11898-3). The I-7530A-MR supports Modbus RTU command especially. Models ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems