WRAPPING MACHINES LEAFLETS: Fully Automatic SPIN
WRAPPING MACHINES LEAFLETS: Fully Automatic SPIN
- Motor Power: 1.5 kW
- Electrical Voltage: 220V single-phase
- Compression Force: 6.5 tons
- Compression Pressure: 160 bar
- Cylinder Stroke: 600 mm
- Cycle Duration: 45 seconds
- External Dimensions: 1570 x 735 x 1730 mm
- Number of Containers: 2
- Maximum Bale Dimensions: 700 x 570 x 400 mm
- Bale Weight: 25-40 kg
- Total Weight: 520 kg
The SPIN fully automatic stretch film wrapping machine is a modern and fast wrapper designed by DNC. It features a modular structure with four masts, an integrated electronic control cabinet, and safety fences. The machine is easy to set up and does not require floor reinforcement. It includes a powered roller conveyor for load infeed and outfeed, and a rotating arm for film wrapping.
- 42 x roller conveyor infeed/outfeed integrated in SPIN
- 4 Siemens S7 200PLC control and LCD display
- Soft start and adjustable rotating arm and carriage speed
- Interfacing for coupling infeed and outfeed lines
- Different wrapping modes and manual override via LCD control display
- Interlocked safety fences with muting light beams
- Powered film prestretch with fixed ratio type and 4 sets of gears
- Automatic load height detection by photocell
- Obstacle detection for rotating arm
- Automatic film gripper and cutting arm device
- Hot wire film cutting system
- Special non-wrapping through passing cycle
- Filter in power line to avoid harmonic
- Powered top platen for unstable loads
- Film tail hot seal
- Fully automatic top sheet dispenser
- Chain conveyors
- Infeed/outfeed conveyors
- Sliding knife film cutting device
- Infeed/outfeed powered roller conveyors (1500 mm length x 1300 mm width)
- Turntable for 90º configuration and output increase
- Fixed ratio powered film pre-stretch with 4 sets of gears
- Other specifications upon request
- Wrapping Height: 2400 mm
- Max. Pallet Size: 1200 x 1200 mm
- Electrical Power: 220V III / 380V III + N
- Power Consumption: 4 kW
- Air Pressure: 6 bar
- Air Consumption: 6 l/cycle
- Roller Conveyor Speed: up to 11.5 m/min
- Output: up to 70 pallets/hour under suitable conditions
The SPIN machine is a rotating arm automatic wrapping machine. The document notes that improvements to the machine may occur without prior notice.
Catalog excerpts
The SPIN fully automatic stretch film wrapping machine is the most modern and fastest wrapper from DNC.Its basic structure consists of a group of building blocks standing on four masts, an electronic control cabinet integrated in the structure and interlocked safety fences bolted to the frame. This renders the machine set up and commissioning real easy and fast. The machine does not require floor reinforcing.The unit integrates a powered roller conveyor stretch for loads infeed and outfeed and is fitted with a rotating armwhere the film carries travels up and down, so that the load remains steady...
Open the catalog to page 2All ICMI Srl catalogs and technical brochures
BR-accoppiate12 Pages
CG254 Pages
SPECIAL MACHINES1 Page
- Case sealer
- Manual dispenser
- Adhesive tape case sealing machine
- Multi-flap carton sealer
- Semi-automatic case sealing machine
- Automatic case sealing machine
- Taping machine
- Ground clamp
- Strip dispenser
- Paper dispenser
- Electronically controlled dispenser
- Tape dispenser
- Hot-melt glue carton sealer
- Electronic dispenser
- Semi-automatic dispenser
- Manual setting taping machine
- Gummed paper taping machine