CG25 R - Taping machine with manual regulation for gummed paper

Product catalog summary

Overview: The CG 25 R is a taping machine designed for sealing boxes using gummed paper. It is suitable for boxes of the same size and requires manual adjustment for different box dimensions. The machine automates the application of gummed paper on both the top and bottom of the boxes after the upper flaps are manually closed by the operator.

Technical Specifications:

Dimensions: 1595 mm (A), 1050 mm (B), 1900 mm (C), 700 mm (D)
Box Size: Max 400 mm, Width 70 mm, Height from 50 mm to 80 mm, Length from 120 mm to 600 mm
Production Capacity: Up to 12 boxes per minute
Pressure: Recommended at 5 bar
Air Consumption: 0.15 Nl/cycle
Box Transfer Speed: 270 mm/second
Weight: 320 Kg
Power Supply: 380 V, 50 Hz, 1.25 kW
Operating Temperature: 5°C to 40°C
Electrical Protection: IP 54

Features:

Manual regulation for different box sizes with hand-wheels for width and height adjustment.
Automatic box conveying and taping with adjustable humidification.
Gummed paper non-return ratchet device and pivoting roller brake to prevent inertial forces.
Pneumatically controlled, self-sharpening guillotine cutting group.
Adjustable pressure rollers and final long brush for enhanced adhesion.
Water pump system for consistent humidification, even with intermittent power supply.
Wetting unit heating system for low-temperature environments.
Self-lubricating mechanisms, excluding transmission chains.
Electrical control box compliant with EN-60204-1, with IP55 protection.
Painted carbon steel frame with electro-galvanized unpainted details.

Compliance: The CG 25 R complies with the machine directive 2006/42/CE and is delivered with a conformity declaration and CE marking.

Catalog excerpts

CG25 R - Taping machine with manual regulation for gummed paper-1

The surest way to seal your products The pictures representing the machine are to be considered purely indicative.ICMI srl reserves the right to make all the adjustments that will be regarded as appropriate in order to constantly improve its products. Taping machine with manual regulation for gummed paper CG 25 R is a Taping machine for gummed paper designed for taping a set of boxes of the same size. Adjustingto the box size is manual but simple and fast. The box is manually introduced after the upper flaps are folded (closed) by the operator. The machine automatically sticks on the gummed paper above and below, sealing the boxes. 24040 Zingonia Verdellino BG Italy Tel. +39 035 883 450 Fax +39 035 885 151 [email protected] www.icmi.it Industria Costruzione Macchine Imballaggio

Open the catalog to page 1

CG25 R - Taping machine with manual regulation for gummed paper-2

Installed power DOVAI Industria Costruzione Macchine Imballaggio

Open the catalog to page 2

CG25 R - Taping machine with manual regulation for gummed paper-3

CG 25 R Taping machine with manual regulation for gummed paper STRUCTURE TECHNICAL FEATURES Manual regulation for boxes of different sizes; Painted carbon steel frame; Manual insertion of the boxes after having closed the upper flaps; Hand-wheel for adjusting the width of the machine to the size of the box; Automatic and simultaneous box conveying and taping (upper and lower); Hand-wheel for adjusting the height of the machine to the size of the box; Automatic insertion of the boxes after having closed the upper flaps; Sliding plane with idle rollers; Adjustable humidification; Box conveying...

Open the catalog to page 3