Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. I.CH MOTION CO.,LTD
  3. H352(0.9degree)35mm-2/4 phase

H352(0.9degree)35mm-2/4 phase

H352(0.9degree)35mm-2/4 phase
1 / 1 PageView full catalog

H352(0.9degree)35mm-2/4 phase

Product catalog summary
Electrical Specification:
The document provides detailed specifications for a series of hybrid stepper motors, specifically the H352 model with a step angle of 0.9°. Key parameters include:
  • Rated Current: Ranges from 0.36A to 0.8A.
  • Phase Resistance: Varies between 4.5Ω and 30Ω.
  • Phase Inductance: Between 4.2mH and 42mH.
  • Holding Torque: From 8 N.cm to 14 N.cm.
  • Detent Torque: Consistently at 0.3 N.cm or 0.6 N.cm.
  • Lead Wire: Options for 4 or 6 wires.
  • Motor Weight: Either 130g or 190g depending on the model.
General Specifications:
The motors have a step angle accuracy of ±5%, resistance accuracy of ±10%, and inductance accuracy of ±20%. They can withstand a temperature rise of up to 80℃ and operate within an ambient temperature range of -10℃ to 50℃. Insulation resistance is at least 100Mohm at 50VDC, and dielectric strength is 500VAC for one minute. Shaft radial and axial play are specified at 0.06mm and 0.08mm respectively under a 450g load.
Complementary Products:
Additional components available include special shafts, encoders, connectors, and long leadwires.
Mechanical Dimensions:
The document references a picture for mechanical dimensions, which is not included in the text.
See more

Catalog excerpts

H352(0.9degree)35mm-2/4 phase-1

HYBRID STEPPER MOTOR GERNERAL SPECIFICATIONS Step Angle(Accuracy )------- 0.9°(±5%) Resistance Accuracy -------- ±10% Inductance Accuracy -------- ±20% Temperature Rise ----------- 80℃Max. Ambient Temperature -------- -10℃~50℃ Insulation Resistance ------ 100Mohm Min, 50VDC Dielectric Strength -------- 500VAC for one minute Shaft Radial Play ---------- 0.06Max. (450 g-load) Shaft Axial Play ----------- 0.08Max.(450 g-load) Electrical Specification Series Model H352-00908 H352-00906 H352-00904 H352-00804 H352-01408 H352-01406 H352-01404 H352-01004 Mechanical Dimensions Standard Leadwire Configuration BI-POLAR(4 LEADS) Complementary Products: Special shaft Encoders Connector Long leadwires

 Open the catalog to page 1

All I.CH MOTION CO.,LTD catalogs and technical brochures

  1. H201(20mm) - 1.8°/step, 2/4 Phase
    H201(20mm) - 1.8°/step, 2/4 Phase

    1  Page

  2. I.CH--Permanent Stepper Motor+Gearbox
    I.CH--Permanent Stepper Motor+Gearbox

    8  Pages

  3. ICH--Permanent Stepper Motor Linear Actuator-II
    ICH--Permanent Stepper Motor Linear Actuator-II

    7  Pages

  4. I.CH--AC Synchronous Motor
    I.CH--AC Synchronous Motor

    5  Pages

  5. AC Induction Geared Motor A702
    AC Induction Geared Motor A702

    2  Pages

  6. Hybrid Stepper Servo Motor
    Hybrid Stepper Servo Motor

    5  Pages

  7. Hybrid Stepper Gear Motor
    Hybrid Stepper Gear Motor

    5  Pages

  8. D202A1
    D202A1

    1  Page

  9. D252A4
    D252A4

    1  Page

  10. D362
    D362

    1  Page

  11. D372B3
    D372B3

    1  Page

  12. D482G2
    D482G2

    1  Page

  13. H571
    H571

    2  Pages

  14. HP281
    HP281

    1  Page

  15. H1101,1106
    H1101,1106

    1  Page

  16. HS561
    HS561

    1  Page

  17. HS601
    HS601

    1  Page

  18. HS861
    HS861

    1  Page

  19. H364
    H364

    1  Page

  20. H391
    H391

    1  Page

  21. H392
    H392

    1  Page

  22. H421
    H421

    1  Page

  23. PM STEP MOTOR P153 (15MM)
    PM STEP MOTOR P153 (15MM)

    1  Page

  24. LINEAR HYBRID STEPPER MOTOR HL353(35mm)
    LINEAR HYBRID STEPPER MOTOR HL353(35mm)

    1  Page

  25. HYBRID STEPPER MOTOR H397(39mm)
    HYBRID STEPPER MOTOR H397(39mm)

    1  Page

  26. HYBRID STEPPER MOTOR H606 (60mm)
    HYBRID STEPPER MOTOR H606 (60mm)

    1  Page

  27. HYBRID STEPPER MOTOR H201-00202A+Encoder
    HYBRID STEPPER MOTOR H201-00202A+Encoder

    1  Page

  28. I.CH--Brushless DC Motor
    I.CH--Brushless DC Motor

    9  Pages

  29. I.CH - PM Stepper Motor
    I.CH - PM Stepper Motor

    10  Pages

  30. I.CH- AC Re-syn Motor
    I.CH- AC Re-syn Motor

    5  Pages

  31. PM STEP MOTOR
    PM STEP MOTOR

    10  Pages

  32. Hybrid Stepper Motor 2/ 4 phase
    Hybrid Stepper Motor 2/ 4 phase

    30  Pages

  33. BLDC Servo Motor
    BLDC Servo Motor

    5  Pages

  34. DC Planet Gear Motor
    DC Planet Gear Motor

    6  Pages

  35. AC SYNCHRONOUS MOTOR
    AC SYNCHRONOUS MOTOR

    5  Pages

  36. AC Induction Geared Motor A802(80mm)
    AC Induction Geared Motor A802(80mm)

    2  Pages

  37. AC Induction Geared Motor A602(60mm)
    AC Induction Geared Motor A602(60mm)

    2  Pages

  38. AC Syn-Motor S501(50mm)
    AC Syn-Motor S501(50mm)

    1  Page

  39. Brushless DC motor driver--C60-460
    Brushless DC motor driver--C60-460

    5  Pages

  40. Brushless DC Servo Motor D426(42mm)
    Brushless DC Servo Motor D426(42mm)

    1  Page

  41. D122F (Size 12mm) Central Axis
    D122F (Size 12mm) Central Axis

    1  Page

  42. D163-1B(Size 16mm)
    D163-1B(Size 16mm)

    1  Page

  43. Stepper Driver C435-125(0~40VDC / 0~29VAC)
    Stepper Driver C435-125(0~40VDC / 0~29VAC)

    3  Pages

  44. Stepper Driver C460-125AD (0~80VDC / 25~50VAC)
    Stepper Driver C460-125AD (0~80VDC / 25~50VAC)

    3  Pages

  45. Permanent Stepper Motor Gearbox 15mm
    Permanent Stepper Motor Gearbox 15mm

    1  Page

  46. HALLOW SHAFT P251(25mm)
    HALLOW SHAFT P251(25mm)

    1  Page

  47. S493(49mm) 1~75rpm,70~0.6kg.cm
    S493(49mm) 1~75rpm,70~0.6kg.cm

    1  Page

  48. BRUSHLESS DC MOTOR D805(80MM)
    BRUSHLESS DC MOTOR D805(80MM)

    1  Page

  49. BRUSHLESS DC MOTOR D605(60MM)
    BRUSHLESS DC MOTOR D605(60MM)

    1  Page

  50. BRUSHLESS DC MOTOR D425(42MM)
    BRUSHLESS DC MOTOR D425(42MM)

    1  Page

  51. HL203(1.8degree)20mm-2/4 phase
    HL203(1.8degree)20mm-2/4 phase

    1  Page

  52. PM Stepper Motor Gear P244
    PM Stepper Motor Gear P244

    3  Pages

  53. HS421(1.8degree )42mm-2 Phase
    HS421(1.8degree )42mm-2 Phase

    1  Page

  54. Hybrid Stepper Gear Motor (HP201)
    Hybrid Stepper Gear Motor (HP201)

    1  Page

  55. H351(1.8degree)35mm-2/4 phase
    H351(1.8degree)35mm-2/4 phase

    1  Page

  56. H281(1.8degree)28mm-2/4 phase
    H281(1.8degree)28mm-2/4 phase

    1  Page

  57. Linear Stepper L421-0806A2(42mm)
    Linear Stepper L421-0806A2(42mm)

    1  Page

  58. Linear Stepper L252-012B(25mm)
    Linear Stepper L252-012B(25mm)

    1  Page

  59. Linear Stepper L252-012A(25mm)
    Linear Stepper L252-012A(25mm)

    2  Pages

  60. Linear Stepper L251-128(25mm)
    Linear Stepper L251-128(25mm)

    1  Page

  61. Linear Stepper L251-040(25mm)
    Linear Stepper L251-040(25mm)

    1  Page

  62. Linear Stepper L251-110(25mm)
    Linear Stepper L251-110(25mm)

    1  Page

  63. CAN-RS232 Converting Controller CI250
    CAN-RS232 Converting Controller CI250

    3  Pages

  64. Super Miniature Stepper Driver CI243
    Super Miniature Stepper Driver CI243

    2  Pages

  65. Serier Port Stepper Driver CI241
    Serier Port Stepper Driver CI241

    3  Pages

  66. Parallel Port Stepper Driver CI240
    Parallel Port Stepper Driver CI240

    6  Pages

  67. Integral Stepper Motor HI110
    Integral Stepper Motor HI110

    1  Page

  68. Integral Stepper Motor HI86
    Integral Stepper Motor HI86

    1  Page

  69. Integral Stepper Motor HI60
    Integral Stepper Motor HI60

    1  Page

  70. Integral Stepper Motor HI42
    Integral Stepper Motor HI42

    1  Page

  71. Integral Stepper Motor HI Series
    Integral Stepper Motor HI Series

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.