JETBIO 2020 - USE AND RECOMMENDATIONS MANUAL - EN
10Pages

Designer and manufacturer USE AND MAINTENANCE MANUAL JETBIO 2020 stainless steel 316L Surface disinfection by air READ CAREFULLY BEFORE USING

General informations JETBIO is an air disinfection device. The device sprays a disinfectant product into the atmosphere, the APABIO, thus forming a mist which is then deposited on all surfaces in contact with air. USE AND MAINTENANCE MANUAL Safety instructions (read very carefully) Any electric machine must be used exclusively for the use for which it is intended, respecting the standards mentioned in the user manual. Improper or improper use of any electrical device can result in injury, electric shock, fire or explosion. Current machines are built according to criteria for prevention...

WARNING: electrical hazard. • Before connecting the machine to the electrical network, check that the operating voltage corresponds to that indicated on the machine's rating plate. • Make sure that the electrical network is provided with an effective earth and a circuit breaker. • Check that the cable plug exactly matches the network plug. • Do not modify the plug. • Do not use reducers, adapters or multiple sockets if you do not know the power absorbed by each use. • If extension cords are used, they must be adapted to the power absorbed by the machine and must be fitted with plug / socket...

FOR YOUR SAFETY : • Do not allow the machine to be used by children or persons unable to understand the dangers relating to the use of electrical equipment. • Do not bring the end of the suction hose near your face or that of others, especially never do it towards your eyes and ears. • In the event of abnormal operation (motor too noisy, excessive heating or other suspicious signals), switch off the machine and remove the plug. For any intervention, contact the manufacturer exclusively. • If liquid comes out of the machine from places other than the outlet nozzle, switch off the machine...

Machine structure JETBIO 2020 consists of the following parts: • The machine body, • The 316L stainless steel tank containing the product • The hose for vacuuming the product • The outlet nozzle to distribute the product, handle Air filter Screwed cover Flow control valve Timer On Off Digital Stainless steel tank containing the product (6.5 L max))

Protocol and Instructions for disinfecting a room with the JETBIO 2020 To operate the JETBIO 2020 disinfection device, the following operations must be carried out in order: 1. Transfer the APABIO product (or other) from a 5-liter container into an empty 1-liter bottle or use the funnel provided, then pour the product into the tank through the filling notch on the top of the hood of the 6.5 liter tank. 2. Position the machine inside the room to be disinfected, (as close as possible to the exit door), check that there are no openings in order to obtain the best possible seal and not...

7.Press the "START" button, the device will start and the product will be released. You leave the room. You close the room and prohibit access. (ex: a Panel (Disinfection in Progress). 8.At the end of the diffusion time, you must wait at least 30 minutes of contact time to let the APABIO disinfectant product act. (Virucidal effect) 9.At the end of the diffusion time and the contact time, restart the ventilation or ventilate until you obtain an ambient hydrogen peroxide level of less than 1 ppm (average exposure value recommended). You can then enter the premises, turn off the machine by...

Device maintenance Warning: The maintenance of the parts located inside the machine can only be carried out by the after-sales service unless prior agreement. The JETBIO model is a professional machine. The warranty on these machines lasts for one year and covers all failures caused by manufacturing defects. The warranty does not cover breakdowns caused by improper use of the machine. For sustainable use of the machine, apply the following recommendations: 1. At the end of the disinfection, before storing the machine, you must purge the machine by running it empty. After disinfection,...

PRODUCT : Air disinfection machine. MODEL : JETBIO NEW 2020 DESCRIPTION: 230V (Single-phase alternating), 50 / 60Hz. Electric power 920W. 5/12 AMP Noise Level: <88 db to 1 Meter. Motor speed: 24000 RPM - Air Filter: Triple Stage Hardware: SS304 - Stainer Nipples: SS316 - Tubing: Silicon Grade (FDA & USP CLASS VI Complient) The manufacturer IBL Concept, 69 avenue Aristide Briand, 94230 in CACHAN (France) declares, under its own responsibility that the product mentioned above, by design and construction and as we put it into circulation, complies with basic safety and hygiene requirements of...