Material Testing Engineering Combined compression-flexure automatic testing machines For determining the compressive and flexural strengths of cement and mortar specimens Only for determining the compressive strength of cement and mortar specimens 28814 Daganzo de Arriba - Madrid - Spain E-mail: [email protected] ■ http: www. ibertest com

AUTOTEST / CIB MD2 W Introducing AUTOTEST / CIB MD2 W Automatic, computerized, servohydraulic machines for compression and flexure tests on cement specimens, with two independent testing frames, external microproccesed MD2 electronics and computerized management of tests with WinTest32 software. CEMENTS ››Precission class 1, according to EN-ISO 7500-1 ››High rigidity compression testing frame with maximum capacity of 200, 300 or 400 kN (depending on version). Base plate and crosshead made ​​of steel. ››Machined and rectified columns made of chrome plated steel. AUTOTEST Series machine ››Flexure...

The key element for all cement laboratories Specially designed for serial test on cement factories and quality control laboratories. Intended to perform compression and flexure tests on specimens of cement mortar, adhesive cement, plaster, CEMENTS ceramics, refractories and similar materials. AUTOTEST machines fulfill all requirements and demands imposed by the main international standards: EN 196-1, EN 1015-11, ISO 679, ASTM C 109, ASTM C 349, etc. With AUTOTEST machines, several strength tests can be performed, depending on the maximum capacity Great design advantages ››System of 2 independent...

AUTOTEST / CIB MD2 W Table of AUTOTEST models and features MODEL Maximum capacity in compression Class 1, according to EN-ISO 7500-1 Single scale (autoscale) from 2% to 100% of the maximum capacity of each testing frame Force measurement system Load cell in each testing frame 5 digit floating point Accuracy of measured load Better than ± 1% within measuring range Calibrated measuring range Maximum capacity in flexure 2 % to 100 % of the capacity of each installed cell Measuring range (compression) Measuring range (flexure) Load speed Freely programmable by user, with minimum and maximum tolerances....

AUTOTEST / CIB MD2 W CIB MD2 W Compression testing machine (single testing frame) For determining the compressive strength of cement and mortar specimens When using ASTM testing standards, only is neccesary perform compression tests on cubic specimens of 2” CEMENTS (50 mm), so a secundary frame for flexure tests is no needed. For those users who only need compression testing, IBERTEST offers a basic version of the AUTOTEST machine, in which flexure zone has been removed. In this case, AUTOTEST series turns its name into CIB series. The main characteristics of machine, as supporting structure...

Maximum capacity Class 1, according to EN-ISO 7500-1 Single scale (autoscale) from 2% to 100% of the maximum capacity Force measurement system Load cell 5 digit floating point Accuracy of measured load Better than ± 1% within measuring range Calibrated measuring range Measuring range Load speed Freely programmable by user, with minimum and maximum tolerances. User can program any standard test procedure, by software. Accuracy of load speed Speed rate is checked in real time, displaying on screen the graphic F(t), verifying real drift over the maximum and minimum established in the standard. Vertical...

AUTOTEST / CIB MD2 W MD2. External electronic control system The test runs under the control of the MD2 electronic unit. The test is programmed via software Wintest 32, which running on Windows. This electronic unit is integrated into the electric board of the machine, and enables for maximum CEMENTS performance in terms of signal reading, close-loop control and export of data to computer. The MD2 controller overcomes greatly the performance of the electronic cards for PC. Control diagram Its main advantage is that the user can, in case of failure and/or changes of the original PC of the machine,...

AUTOTEST / CIB MD2 W W Computerized system: All in One Computer The computer system comprises an “All in One” comp- WinTest32 software package, developed specifically for cements, mortars and similar materials testing, with AUTOTEST and CIB series testing machines. puter and testing software WinTest32. WinTest32 Software: Version WinTest.Cem PC “All in One” touch screen included The PC connects via USB to MD2 electronic unit, working as a client of the electronic unit, and collects data obtained during the test. The “All in One” PC , with touch screen, enables data input via virtual keyboard...

During the test ››Automatic test execution in accordance with method and the values entered. ​​ ››Graphical display of test course. ››Real time displaying of numerical values measured ​​ by different sensors connected to the system CEMENTS (strength, strain, etc.) ››Execution and displaying of calculations programmed by the user, depending on values of ​​ the sensors (strenght, modules, etc) Once test has finished Real time diagram F(t), showing loading rate and maximum and minimum tolerances, as indicated by the Standard ››Management of testing final results. ››Statistical data management with...

Telediagnosis. Remote online maintenance (optional) All the automatic machines from IBERTEST with computerized system for programming and data acquisition (system W), can be benefit from the Telediagnosis service. (“on-line” maintenance system). This modern technology offers an after-sales high quality Technical Assistance Service, even without the physical presence of our technicians, regardless of where the machine is installed, through a software application and a secure connection via Internet. The link is made between the computer of the client´s machine and the Technical Assistance Service...