Catalogs >
IAG Industrie Automatisierungsgesellschaft m.b.H. >
FLS FTIR-sampling system

FLS FTIR-sampling system
1Pages

Catalog excerpts

improved safety Easy setup Compact design Simple operation FTIR sampling system The IAG-FLS is the ideal additional device to your FTIR to turn it into a complete, simple and safe working measuring build-up. The IAG FLS were designed as additional devices for the simple and safe operation of FTIR analysers. They provide a fully heated, filtered and adjustable sample gas flow through the analyser, provided by a reliable heated sample gas pump. Setup is very simple and can be carried out in just a few minutes. It only needs the connection of two heated lines, one to the FTIR and one to the sampling point, network connection, power and purge gas connections. Operation can be done on the device via pushbuttons, or via the provided software which also shows all important FTIR and FLS parameters such as sample flow, gas eel pressure and system temperatures. Before and after measuring the device automatically starts purging the analyser with nitrogen which will help to avoid costly mishaps such as corrosive probes condensing inside the gas cell. To achieve optimum measuring accuracy all gas contacted surfaces are stainless steel or PTFE with a uniform heating and minimised internal volume. Technical data Power supply: Heated line connections: Temperature range: Adjustable sample flow: Filter cartridge: 70mm2 PTFE bond glass IAG - Industrie Automatic erungsgesellschaft m.b.H ■ Industriestrasse 2 ■ 2722 Weikersdorf ■ Tel.: +43 2622 21734/77 ■ Fax: +43 2622 21734/85 ■ Email: r.pokorny@iag.at

Open the catalog to page 1

FLS FTIR-sampling system 1Pages

Catalog excerpts

All IAG Industrie Automatisierungsgesellschaft m.b.H. catalogs and technical brochures

FLS FTIR-sampling system
1Pages