*mydirectindustry

M3-105-180-i34

Product catalog summary

General Information
The Electric Final Drive M3 operates within an ambient temperature range of -20°C to 25°C, with derating required for higher temperatures. It adheres to insulation class EN 60034-1 F(155°C) and has an enclosure type of DIN EN 60529 IP67, with an optional IP69k rating.

Performance Characteristics
The drive engine is a permanent magnet synchronous type with 12 poles and a reducer ratio of 34. It weighs 62kg and delivers a peak torque of 2420 Nm at the flange. The peak current is 28 Arms, while continuous torque and current at 30 1/min are 1240 Nm and 15.2 Arms, respectively. The maximum speed at 400VAC is 74 1/min, with a torque constant of 2.5 Nm/Arms and a back EMF constant of 214 V/1000 min-1. Electrical resistance at 25°C is 0.32 Ω, and electrical inductance at 1kHz is 7 mH/6 mH (EST).

Mechanical Brake
The drive features a currentless brake with a braked engine shaft principle. Typical braking torque is 2550 Nm, with an activation current of 1.05A and a hold current of 0.25A. The typical resistance is 14Ω.

Feedback
The system includes a PT 1000 temperature sensor and a SIN/COS-Encoder angle sensor. The power supply is 5V +/-5%, with a power consumption of 20mA. Output amplitude is 1.1 +/-0.2Vpp, and output offset is Vdd/2 +/- 5mV, with an internal serial impedance of 720Ω.

Dimensions and Load
Bearing capacity is specified as C 2x57500N and C0 2x78000N.

Connections
Power connections use an AMPHENOL SURLOCK PLUS connector, part number SLPPA16BSO, with a cable size of 16mm2 and a diameter of 8.1 +/-0.2mm. Signal connections for SIN/COS complementary use an Amphenol Ecomate RM connector, plug RT0W61210SNH, with pins SS20W1F (0.34-0.5mm2).

Catalog excerpts

Electric Final Drive M3-105-180-i34

Open the catalog to page 1

Electric Final Drive [Geben Typ M3 Sie Text ein] Performance Characteristics General Information Ambient Temperature Insulation Class EN 60034-1 Enclosure Type DIN EN 60529 *Derating for higher Temperatures Drive Engine Type Number of Poles Reducer Ratio Weight Peak Torque(flange) Peak Current (rms) Continuous Torque @ 30 1/min (flange) Continuous Current @ 30 1/min (rms, flange) Maximum Speed @ 400VAC Torque Constant @ motor shaft Back EMF Constant (Line to Line, peak, rpm @ motor shaft) Electrical Resistance (Rs) @ 25°C Electrical Inductance @ 1kHz (Lq/Ld) Mechanical Brake Type Function Principle...

Open the catalog to page 2

Electric Final Drive [Geben Typ M3 Sie Text ein] Feedback Temperature Sensor Angle Sensor Sensor-Type Power Supply (Vdd) Power Consumption Output Amplitude Output Offset Internal serial Impedance Bearing Capacity Connections Power connections Part number Included AMPHENOL SURLOCK PLUS SLPPA16BSO No Cable-size Cable Dia. Included Signal Connections -SIN/COS -complementary Connector Plug Pins Included I&W Engineering GmbH | www.iwengin.com | +41 (0) 55 210 33 11 | Seeblickstrasse 11a | Rapperswil-Jona | Switzerland

Open the catalog to page 3

All I&W Electric Drive Systems catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list