*mydirectindustry

M230 (440V)

Product catalog summary

General Information
The Electric Final Drive M230-105-100-i134.8-B24V operates within an ambient temperature range of -20°C to 25°C, with derating required for higher temperatures. It adheres to insulation class EN 60034-1 F(155°C) and has an enclosure type of DIN EN 60529 IP67, with an optional IP69K rating.

Performance Characteristics
The drive engine is a permanent magnet synchronous type with 12 poles and a reducer ratio of 134.8. It weighs 82kg and delivers a peak torque of 8400 Nm at the flange, with a peak current of 46 Arms. Continuous torque at 28 1/min is 3140 Nm, with a continuous current of 21 Arms. The maximum speed at 440VAC is 40 1/min. The torque constant at the motor shaft is 1.46 Nm/Arms, and the back EMF constant is 88 V/1000 min-1. Electrical resistance at 25°C is 108 mΩ, and electrical inductance at 1kHz is 2.4 mH/2.1 mH.

Mechanical Brake (Optional)
The currentless brake operates on a braked engine shaft principle, providing a typical braking torque of 8400 Nm. It requires a typical activation current of 1.05A and a hold current of 0.25A, with a resistance of 14Ω.

Feedback
The system includes a PT 1000 temperature sensor and a SIN/COS-Encoder angle sensor. The power supply is 5V +/-5%, with a power consumption of 20mA. Output amplitude is 1.1 +/-0.2Vpp, and output offset is Vdd/2 +/- 5mV, with an internal serial impedance of 720Ω.

Dimensions and Load
Bearing capacity is specified as C 2x57500N and C0 2x78000N.

Connections
Power connections require an AMPHENOL SURLOCK PLUS mating connector (part number SLPPA25BSO), with a cable size of 25mm2, neither of which are included. Signal connections for SIN/COS complementary use an Amphenol Ecomate RM connector with a plug RT0W61210SNH and 10 pins (SS20W1F, 0.34-0.5mm2), also not included.

Catalog excerpts

Electric Final Drive M230 (440V) Type M230_105_100_i134.8_B24V

Open the catalog to page 1

Electric Final Drive [Geben Sie Text ein] Typ M230-105-100-i134.8-B24V Performance Characteristics General Information Ambient Temperature Insulation Class EN 60034-1 Enclosure Type DIN EN 60529 *Derating for higher Temperatures Drive Engine Type Number of Poles Reducer Ratio Weight Peak Torque(flange) Peak Current (rms) Continuous Torque @ 28 1/min (flange) Continuous Current @ 28 1/min (rms, flange) Maximum Speed @ 440VAC Torque Constant @ motor shaft Back EMF Constant (Line to Line, rms, rpm @ motor shaft) Electrical Resistance (Rs) @ 25°C Electrical Inductance @ 1kHz (Lq/Ld) Mechanical Brake...

Open the catalog to page 2

Electric Final Drive [Geben Sie Text ein] Typ M230-105-100-i134.8-B24V Feedback Temperature Sensor Angle Sensor Sensor-Type Power Supply (Vdd) Power Consumption Output Amplitude Output Offset Internal serial Impedance Bearing Capacity Connections Power connections Mating Connector Part number Included Cable-size Included Signal Connections -SIN/COS -complementary Connector Plug Pins (10X) Included AMPHENOL SURLOCK PLUS SLPPA25BSO No I&W Engineering AG | www.iwengin.com | +41 (0) 55 210 33 11 | Engelhölzlistrasse 9c | Rapperswil-Jona | Switzerland

Open the catalog to page 3

All I&W Electric Drive Systems catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list