*mydirectindustry

M200 (400V)

Product catalog summary

General Information
The Electric Final Drive M200 operates within an ambient temperature range of -20°C to 25°C, with derating required for higher temperatures. It adheres to insulation class EN 60034-1 F(155°C) and has an enclosure type of DIN EN 60529 IP67, with an optional IP69k rating.

Drive Engine Specifications
The drive engine is a permanent magnet synchronous type with 8 poles and a reducer ratio of 133.2. It weighs 50 kg and delivers a peak torque of 5000 Nm at the flange. The peak current is 42 Arms, while continuous torque and current at 10 1/min are 1615 Nm and 15.6 Arms, respectively. The maximum speed at 480 VAC is 66 1/min, with a torque constant of 0.82 Nm/Arms and a back EMF constant of 70.7 V/1000 min-1. Electrical resistance at 25°C is 207 mΩ, and electrical inductance at 1kHz is 2.2 mH/2 mH.

Mechanical Brake
The mechanical brake is a currentless type with a braked engine shaft. It provides a typical braking torque of 5000 Nm, with an activation current of 1.15A and a hold current of 0.13A. The typical resistance is 12.8 Ω.

Feedback and Sensors
The system includes a PT 1000 temperature sensor and a SIN/COS angle sensor. The SIN/COS encoder operates with a power supply of 5V +/-5%, consuming 20mA. It has an output amplitude of 1.1 +/-0.2Vpp and an output offset of Vdd/2 +/- 5mV, with an internal serial impedance of 720Ω.

Dimensions and Load
The bearing load capacities are FDYN 2x48500N and FSTAT 2x67500N.

Connections
Power connections use an AMPHENOL SURLOCK PLUS connector, part number SLPPA16BSO, with a cable size of 16mm2 and a diameter of 8.1 +/-0.2mm. Signal connections for SIN/COS complementary use an Amphenol Ecomate RM connector, plug RT0W61210SNH, with 10 pins (SS20W1F, 0.34-0.5mm2).

Catalog excerpts

Electric Final Drive M200 (400V) Typ: M200-102-24s4-i132.2-B24V

Open the catalog to page 1

Electric Final Drive Typ M200-102-24s4-i133.2-B24V [Geben Sie Text ein] Performance Characteristics General Information Ambient Temperature Insulation Class EN 60034-1 Enclosure Type DIN EN 60529 *Derating for higher Temperatures Drive Engine Type Number of Poles Reducer Ratio Weight Peak Torque(flange) Peak Current (rms) Continuous Torque @ 10 1/min (flange) Continuous Current @ 10 1/min (rms, flange) Maximum Speed @ 480 VAC Torque Constant @ motor shaft Back EMF Constant (Line to Line, peak, rpm @ motor shaft) Electrical Resistance (Rs) @ 25°C Electrical Inductance @ 1kHz (Lq/Ld) Type Function...

Open the catalog to page 2

Electric Final Drive Typ M200-102-24s4-i133.2-B24V [Geben Sie Text ein] Feedback Temperature Sensor Angle Sensor -SIN/COS (standard) Sensor-Type Power Supply (Vdd) Power Consumption Output Amplitude Output Offset Internal serial Impedance FDYN FSTAT I&W Engineering AG | www.iwengin.com | +41 (0) 55 210 33 11 | Engelhölzli 9c | Rapperswil-Jona | Switzerland

Open the catalog to page 3

Electric Final Drive Typ M200-102-24s4-i133.2-B24V [Geben Sie Text ein] Connections Power connections AMPHENOL SURLOCK PLUS SLPPA16BSO No Cable-size Cable Dia. Included Signal Connections -SIN/COS -complementary Connector Part number Included Connector Plug Pins (10X) Included I&W Engineering AG | www.iwengin.com | +41 (0) 55 210 33 11 | Engelhölzli 9c | Rapperswil-Jona | Switzerland

Open the catalog to page 4

All I&W Electric Drive Systems catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list