*mydirectindustry

M160i3 (48V/96V)

Product catalog summary

General Information
The Electric Final Drive M160i3 operates within an ambient temperature range of -20°C to 25°C, with derating required for higher temperatures. It adheres to insulation class EN 60034-1 F(155°C) and has an enclosure type of DIN EN 60529 IP67, with an optional IP69k rating.

Performance Characteristics
The drive engine is a permanent magnet synchronous type with 8 poles and a reducer ratio of 83.5. It weighs 30kg and delivers a peak torque of 2200 Nm at the flange. The peak current is 235 Arms, while continuous torque and current at 10 1/min are 992 Nm and 104 Arms, respectively. The maximum speed at 48V is 54 1/min, with a torque constant of 0.12 Nm/Arms and a back EMF constant of 10.5 V/1000 min-1. Electrical resistance at 25°C is 4.8 mΩ, and electrical inductance at 1kHz is 68 mH/57 mH.

Mechanical Brake
The drive features a currentless brake with a braked engine shaft principle, providing a typical braking torque of 2200 Nm. The activation voltage is 12V.

Feedback
The system includes a PT 1000 temperature sensor and a SIN/COS-Encoder angle sensor. The power supply is 5V +/-5%, with a power consumption of 20mA. The output amplitude is 1.1 +/-0.2Vpp, and the output offset is Vdd/2 +/- 5mV, with an internal serial impedance of 720Ω.

Dimensions and Load
The dynamic bearing load is 43kN, and the static bearing load is 57kN.

Connections
Power connections use an AMPHENOL SURLOCK PLUS connector (part number SLPPA16BSO), with a cable size of 16mm2 and a diameter of 8.1 +/-0.2mm. Signal connections (SIN/COS) use an Amphenol Ecomate RM connector (part number RT06128SNH). Connectors are not included.

Catalog excerpts

Electric Final Drive M160i3 (48V/96V) Type M160i3_72_17_i83.5_B12V

Open the catalog to page 1

Electric Final Drive [Geben Sie Text ein] Typ M160i3-72-17-i83.5-B12 Performance Characteristics General Information Ambient Temperature Insulation Class EN 60034-1 Enclosure Type DIN EN 60529 *Derating for higher Temperatures Drive Engine Type Number of Poles Reducer Ratio Weight Peak Torque(flange) Peak Current (rms) Continuous Torque @ 10 1/min (flange) Continuous Current @ 10 1/min (rms, flange) Maximum Speed @ 48 V Torque Constant @ motor shaft Back EMF Constant (Line to Line, peak, rpm @ motor shaft) Electrical Resistance (Rs) @ 25°C Electrical Inductance @ 1kHz (Lq/Ld) Mechanical Brake...

Open the catalog to page 2

Electric Final Drive [Geben Sie Text ein] Typ M160i3-72-17-i83.5-B12 Feedback Temperature Sensor Angle Sensor Sensor-Type Power Supply (Vdd) Power Consumption Output Amplitude Output Offset Internal serial Impedance FDYN FSTAT I&W Engineering AG| www.iwengin.com | +41 (0) 55 210 33 11 | Engelhälzli 9c | Rapperswil-Jona | Switzerland

Open the catalog to page 3

Electric Final Drive [Geben Sie Text ein] Typ M160i3-72-17-i83.5-B12 Connections Power connections AMPHENOL SURLOCK PLUS SLPPA16BSO No Cable-size Cable Dia. Included Signal Connections (SIN/COS) Connector Part number Included Connector Part number Included I&W Engineering AG| www.iwengin.com | +41 (0) 55 210 33 11 | Engelhälzli 9c | Rapperswil-Jona | Switzerland

Open the catalog to page 4

All I&W Electric Drive Systems catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list