- Catalogs
- I-MAK Réducteurs
- Helical worm geared motor - IRSD
Helical worm geared motor - IRSD
Helical worm geared motor - IRSD
This section describes the types and designations of gearboxes, including those with aluminum and cast iron housings. It specifies configurations such as input shaft, motorized, and IEC input flange options.
Details various input configurations for gearboxes, including solid input shafts, motorized options, and IEC input flanges.
Lists gearbox and motor options, including output flanges, shafts, brakes, encoders, and fans. Special options for IRS and IRSD series are highlighted.
Describes the output configurations available, such as hollow output shafts, left/right output shafts, and double output flanges.
Explains the mounting variations for gearboxes, including special shaft dimensions, materials, and hardened shafts.
Discusses variations in gearbox components, focusing on oil types, including synthetic and food-compatible oils.
Provides guidelines on the service factor for gearboxes, crucial for determining the appropriate gearbox for specific applications.
Analyzes the load characteristics of gearboxes, detailing the types of machines and applications they are suitable for.
Offers recommendations for the control and maintenance of gearboxes to ensure optimal performance and longevity.
Details the types of brakes available, including manual and double brakes, and provides a brake selection table.
Describes the various mounting positions for gearboxes and the corresponding oil quantities required.
Includes performance tables for worm geared motors and helical worm geared motors, providing torque and ratio ranges.
Summarizes the specifications for different series of gearboxes, including aluminum and cast iron housing options, torque ranges, and ratio ranges.
The document outlines various specifications for components such as seals, bearings, housing, gears, paint, and motor variations. Each component has specific codes and options, including special dimensions, materials, and configurations.
The document provides detailed procedures for ordering gearboxes, specifying the type, size, and mounting options. It also includes guidelines for selecting the appropriate service factor based on load characteristics and daily operation time.
Standard classifications are provided for voltage, frequency, IP classification, and isolation class. For instance, 400 V 50 Hz is considered standard for motors, and IP 55 is the standard IP classification.
Recommendations are given for selecting components based on environmental conditions, such as using specific bearings for hot or cold environments. The document advises consulting technical teams for environments outside the standard temperature range.
The tables list various options for each component, including special brands, dimensions, and configurations. For example, the service factor table provides guidance on selecting the appropriate factor based on machine load and operation time.
The document emphasizes the importance of selecting the correct service factor for gearboxes, which depends on the load characteristics and operation time. It also highlights the need for consulting technical teams for non-standard conditions.
- Brakes without Cooling Fan: These brakes are mounted on the fan side of the electric motor by removing the cooling fan and fan cover. They are suitable for motors with short operation periods.
- Brakes with Cooling Fan: These brakes are mounted by extending the motor shaft and fan cover to utilize the fan, necessary for continuously running motors.
- Brakes with Micro Switch: Designed to prevent delayed disengagement due to high starting current, these brakes use a micro switch to ensure the motor starts after brake disengagement, ideal for high power geared motors.
Brakes are designed to operate in both delayed and non-delayed conditions, with delayed operations being the standard connection.
Brakes are manufactured to operate at 24V-DC or 220V-AC. 220V brakes connect directly to the motor terminal box, while 24V brakes require a 220/30V transformer with a rectifier unit.
- Brake Torque
- Brake Type
- Brake Operating Voltage
- Specify if a 220/30V transformer with rectifier unit is needed for 24V brakes.
Tables provide motor size, power, and braking torque specifications for different applications, highlighting light and strong braking options.
Gearboxes with backstop options prevent slipping when machinery stops, with rotation directions specified as counterclockwise (CCW) or clockwise (CW).
Defined as "P" for foot-mounted and "V" for flange-mounted gearboxes, with standard positions being "W1" unless otherwise specified.
Tables specify oil quantities required for different mounting positions and gearbox types.
Details on mineral and synthetic oils, including viscosity classes and usage temperatures, are provided for optimal gearbox performance.
Specifications for motor power, speed, rated current, torque, and efficiency are detailed, with IE class and duty type indicated.
This document provides performance tables for worm geared motors, detailing specifications such as power output, speeds, ratios, service factors, output torque, and radial loads. The tables are presented in multiple languages, including English, Turkish, and French.
The tables list various models of worm geared motors, each with specific parameters:
- Power Output (kW): The power output of the motors is specified in kilowatts (kW) and horsepower (Hp).
- Output Speeds (r.p.m): The rotational speed of the motor output is given in revolutions per minute (r.p.m).
- Ratio (i): The gear reduction ratio is provided, indicating the relationship between input and output speeds.
- Service Factor (fs): This factor indicates the overload capacity of the motor.
- Output Torque (M2): The torque produced by the motor is measured in Newton-meters (Nm).
- Radial Loads (FQlo): The radial load capacity is specified in Newtons (N).
The document includes numerous data points for different motor models, such as:
- Model İRSAM İRSFM 52 / 80 M 4a: Power output of 0.55 kW, output speed of 22.3 r.p.m, ratio of 0.80, service factor of 132, output torque of 3320 Nm, and radial load of 3320 N.
- Model SM 50 / 80 M 4a: Power output of 0.75 kW, output speed of 50 r.p.m, ratio of 1.02, service factor of 110, output torque of 3245 Nm, and radial load of 3245 N.
The document suggests selecting motors based on the specific requirements of power, speed, and load capacity to ensure optimal performance and longevity.
This comprehensive table serves as a guide for selecting the appropriate worm geared motor based on detailed technical specifications, ensuring compatibility with various industrial applications.
The document provides detailed performance tables for worm gear units and helical worm geared motors. It includes specifications, efficiency, output torque, and radial load capacities for various models.
The tables list power output in kW and Hp, output speeds in rpm, gear ratios, efficiency percentages, and output torque in Nm. Radial load capacities are also provided in Newtons.
The tables are divided into sections based on torque ranges, such as 69-142 Nm, 132-262 Nm, and so on. Each section provides data for different power outputs and corresponding performance metrics.
Service Factor (Sf): Indicates the reliability and safety margin of the gear unit. Efficiency (η): Percentage indicating the effectiveness of power transmission. Output Torque (M2): The torque available at the output shaft. Radial Loads (FQ1, FQlo): Maximum permissible radial loads on the output shaft.
Select gear units based on required torque, efficiency, and load capacities. Ensure the service factor is appropriate for the application to maintain reliability.
The document includes dimension pages for worm gearboxes, providing detailed measurements for installation and integration into systems.
Catalog excerpts
Worm Gearbox / Reducteurs a Roue et Vis Sans Fin Gearboxes and Drives / Moto Reducteurs
Open the catalog to page 1
İÇİNDEKİLER / INDEX / TABLE DES MATIÈRES Ti̇ p Tanımlamaları Unit Designitation / Types et designations Giriş Opsiyonları Input Options / Options d’entrée Opsiyonlar Options / Options Çıkış Opsiyonları Output Options / Options de sortie Redüktör Bağlantı Varyasyonları Mounting Options and Variations / Options de montage et d’accouplement Redüktör Komponent Varyasyonları Gearboxes Components Variations / Options et variations Motor Varyasyonları Mounting Options and Variations / Options de montage et d’accouplement Motor komponent varyasyonları Motor’s Components Variations / Composant et options...
Open the catalog to page 3
İÇİNDEKİLER / INDEX / TABLE DES MATIÈRES Fren Seçim Tablosu Brake Selection Table / Table de sélection des freins Geri Dönüş Kilitli Redüktörlerde Dönme Yönü Direction of Rotation of the Gearbox With a Backstop / Sens de rotation des roulement anti-retour Montaj Pozisyonları Mounting Positions / Position de montage Montaj Pozisyonlarına Bağlı Olarak Yağ Miktarları Oil Quantities Per Mounting Position / Quantités d’huiles en fonction des positions de montage Yag Tablosu Lubricant Table / Huiles et lubrifiants Çift gövdeli redüktörler montaj şekilleri Mounting Position of Dual Housing Gearboxes...
Open the catalog to page 4
S SERİSİ / SERIES / SÉRIES • Aluminyum gövdeli sonsuz vidalı redüktörler • Worm geared unit with aluminium housing • Réducteur à roue et vis sans fin avec carter en aluminium • 5 Farklı gövde büyüklüğü • Torque range from 13 to 388 Nm • Ratio range from 7.5 to 100
Open the catalog to page 5
İRS SERİSİ / SERIES / SÉRIES • Döküm gövdeli sonsuz vidalı redüktörler • Worm geared unit with cast iron housing • Réducteur à roue et vis sans fin avec carter en fonte • 8 Farklı gövde büyüklüğü • Torque range from 96 to 16876 Nm • Ratio range from 7.25 to 115
Open the catalog to page 6
İRSD SERİSİ / SERIES / SÉRIES • Döküm gövdeli helisel sonsuz vidalı redüktörler • Helical worm geared unit with cast iron housing • Réducteur hélicoïdal à roue et vis sans fin avec carter en fonte • 5 Farklı gövde büyüklüğü • Torque range from 211 to 4479 Nm • Ratio range from 25 to 33
Open the catalog to page 7
Genel Bilgiler General Information Informations générales
Open the catalog to page 8
Tip TanimlamalariUnit Designitation / Types et designationsAluminyum govdeli sonsuz vidali reduktorler Aluminium housing worm gearbox / Reducteurs a roue et vis sans fin, carter en aluminium Kod Dokum govdeli helisel - sonsuz vidali reduktorler Cast iron housing helical - worm gearbox / Reducteurs helicoidal a roue et vis sans fin, carter en fonte Kod
Open the catalog to page 9
Giri§ Opsiyonlari Input Options / Options d’entree i.Mak S Giri§ milli Solid input shaft Avec arbre de sortie SM Motorlu With motor Avec moteur SP IEC pam flan§li IEC input flange Avec bride PAM - IEC iRSA Giri§ milli Solid input shaft Avec arbre de sortie iRSAM Motorlu With motor Avec moteur iRSAP IEC pam flan§li IEC input flange Avec bride de sortie PAM - IEC iRSD Giri§ milli Solid input shaft Avec arbre de sortie iRSDM Motorlu With motor Avec moteur iRSDP IEC pam flan§li IEC input flange Avec bride de sortie PAM - IEC
Open the catalog to page 10
Opsiyonlar Options / Options Redüktör opsiyonları / Gearboxes options / Options des motoréducteurs Opsiyon Sağ taraf çıkış flanşı Output flange right Bride de sortie ( Droite ) Sol taraf çıkış flanşı Output flange left Bride de sortie ( Gauche ) Çift çıkış flanşı Double output flange Bride de sortie ( Double ) Sağ taraf çıkış mili Output shaft right Arbre de sortie ( Droite) Sol taraf çıkış mili Output shaft left Arbre de sortie ( gauche ) Çift çıkış mili Output shaft double Arbre de sortie ( Double ) Alın mili Double input shaft Arbre d'entrée ( Double ) Alın miline fren bağlantısı Double input...
Open the catalog to page 11
Çıkış Opsiyonları Output Options / Options de sortie S…SD Çift çıkış milli Double output shaft Double arbre de sortie S….SL Çıkış milli (sol) Output shaft ( Left ) Arbre de sortie ( Gauche ) S…FD Çift çıkış flanşlı Double output flange Double bride de sortie S…FL-SL Çıkış milli - Çıkış flanşlı (sol) Output shaft - Output flange ( Left ) Arbre et bride de sortie ( Gauche ) S…FD-SD Çift çıkış flanşlı- Çift çıkış milli Double output flange - Double output shaft Bride de sortie double - Arbre de sortie double S…FL Çıkış flanşlı (sol) Output flange ( Left ) Bride de sortie ( Gauche ) S…C Alın milli...
Open the catalog to page 12
Çıkış Opsiyonları Output Options / Options de sortie Çıkış opsiyonları / Output options / Options de sortie İRS.. Delik milli Hollow output shaft Arbre creux İRS…SD Çift çıkış milli Double output shaft Double arbre de sortie İRS….SL Çıkış milli (sol) Output shaft ( Left ) Arbre de sortie ( Gauche ) İRSF…FD Delik milli - Çift çıkış flanşlı Double output flange Double bride de sortie İRSF…FL-SL Çıkış milli - Çıkış flanşlı (sol) Output shaft - Output flange ( Left ) Arbre et bride de sortie ( Gauche ) İRSF…FD-SD Çift çıkış flanşlı- Çift çıkış milli Double output flange - Double output shaft Bride...
Open the catalog to page 13
Çıkış Opsiyonları Output Options / Options de sortie İRSD…SD Çift çıkış milli Double output shaft Double arbre de sortie İRSD….SL Çıkış milli (sol) Output shaft ( Left ) Arbre de sortie ( Gauche ) İRSDF…FD Çift çıkış flanşlı Double output flange Double bride de sortie İRSDF…FL-SL Çıkış milli - Çıkış flanşlı (sol) Output shaft - Output flange ( Left ) Arbre et bride de sortie ( Gauche ) İRSDF…FD-SD Çift çıkış flanşlı- Çift çıkış milli Double output flange - Double output shaft Bride de sortie double - Arbre de sortie double İRSDF…FL Delik milli - Çıkış flanşlı (sol) Output flange ( Left ) Bride...
Open the catalog to page 14All I-MAK Réducteurs catalogs and technical brochures
IRN - IRO Series82 Pages
Gearboxes and Drives8 Pages
Parallel Shaft Helical Geared Motor199 Pages
HELICAL Geared Motor398 Pages
R01416 Pages
R02410 Pages
Driven by passion6 Pages
K01226 Pages
Y01199 Pages
C02250 Pages
YP Series - Parallel gear units171 Pages
Worm Gearbox186 Pages
Brochure 20186 Pages
IR series263 Pages
Catalogue848 Pages
Brochure générale I-MAK 20166 Pages
I-MAK Brochure 20156 Pages
Parallel geared motors - YP Series194 Pages
Worm gear units - S Series174 Pages
- Alternating current motor
- Multipole motor
- Electric gearmotor
- Asynchronous motor
- Planetary gearbox
- Coaxial gearhead
- Three-phase motor
- Precision gearhead
- Direct current gear-motor
- Right angle gearhead
- Compact gearhead
- 4-pole motor
- Solid-shaft gearhead
- 2-pole motor
- IP55 motor
- Compact electromotor
- Gear train gear reducer
- Hollow-shaft gearhead
- Gearbox for industrial applications