IC 630
2Pages

Features Portable Velocity & Bearing Condition Temperature Measurement Conforms to ISO 2954 & ISO 10816-3 Re-chargeable Battery used with Mains or In-Car Charger Sensor/Cable Fault Indicator Display Hold Function Choice of Metric or Imperial Measurement The NEW IC-630 portable Vibration and Temperature Meter Kit has been designed for use as both an entry level and also a comprehensive vibration/temperature monitoring instrument for maintenance engineers across all types of industry. The kit consists of the compact vibration meter with a combined non-contact temperature measuring sensor aided by a laser locator beam, a hand held probe, a magnetic mount for more permanent installations, a protective carrying case, an instruction manual and battery chargers for both mains and in-car use. The meter is microprocessor based and by selection of the controls can be easily set up to monitor acceleration (g) levels, velocity (mm/sec), displacement (pm), bearing condition (BG or BV), and temperature (°C or °F). A display hold function is also included. The unit, which conforms to ISO 2954 and ISO 10816-3 also has an automatic alarm check for bearing condition. Operating from an internal re-chargeable Lithium battery, the meter offers 48 hours continuous operation. From flat, the unit can be recharged in 3 hours using either the mains or in-car charger supplied with the kit. Because of its compact size, ease of use and battery operation the IC-630 allows engineers to monitor vibration and temperture levels on important machinery anywhere around the factory.

Input Accelerometer Ranges Accuracy Frequency Range Temperature Range Laser Guide Distance Range Accuracy Display Hold Mode 100 mV/g constant current accelerometer Hand held, supplied with 0.8 M cable Acceleration ... 0-20 g Peak Velocity ... 0-200 mm/s RMS Displacement... 0-2000 pm pk-pk Bearing Condition {BG)... 0-20 g RMS Bearing Condition (BV)... 0-200 mm/s RMS ± 5% Acceleration ... 5 Hz to 12 kHz Velocity ... 10 Hz to 1 kHz Displacement... 5 Hz to 1 kHz Bearing Condition (BG & V)... 1 kHz to 12 kHz Automatic Alarm Check for Bearing Condition -20°C to 120°C or -5°F to +250°F Red, <1 mW,...