IC 420
2Pages

Top Entry, 4-20 mA Industrial Accelerometer Typical Applications Low cost on-line means of monitoring with the capability of interfacing direct into PLC, BMS or any 4-20mA input module. Proven use in vibration monitoring for offline applications using commercially available data collectors. Protecting... Fans, Motors, Pumps, Compressors, Centrifuges, Conveyers, Air Handlers, Gearboxes, Rolls, Dryers, Presses, Cooling, HVAC, Spindles, Machine Tooling, Process Equipment and many more, Technical Performance Mounted Base Resonance Velocity Ranges Frequency Response Isolation Measurement Range Transverse Sensitivity 5 kHz min. 0-10 to 0-100 mm/sec RMS ±10% Nominal 80 Hz at 22 °C 10 Hz to 1 kHz ±5 % - ISO10816 Base isolated 50 g peak Less than 5% PRODUCT DATA Electrical Output Current Supply Voltage Settling Time Output Impedance Case Isolation 4-20 mA DC proportional to RMS velocity (mm/s) 15-30 Volts DC (for 4-20 mA) 2 seconds Loop Resistance 600 Ohms max. at 24 Volts >108Ohms at 500 Volts Operating Temperature Range Sealing Maximum Shock Emissions Immunity Case Material Sensing Element/Construction Mounting Torque Weight Maximum Cable length Mating Connector Mounting Threads Options Stainless Steel PZT/Compression 8 Nm 110 gms (nom) 1000 meters HS -AA004 See ‘How to order’ table Integral cable, filters, temperature output, various connector assemblies, other sensitivities Scare Tel: 0032 (0) 65/45.72.14 Fax 0032(0) 65/36.17.46 Email: info@icareweb.com Web: www icareweb.com

Frequency Response Mounting of sensor to achieve good repeatable readings. Vibration sensor should be firmly fixed to aflat surface (spot face surface may be needed to be produced and cable anchored to sensor body.) Please contact our Sales Office for information on sensor accessories (mounting studs, etc) and multichannel switch boxes. We reserve the right to alter the specification of this product without poor notice