VALVES
48Pages

TIPPING SOLUTIONS COMPONENT CATALOG hyva.com hyva.com Subject to change without notice

Subject to change without notice

Subject to change without notice

Subject to change without notice

HT-VALVES INTRODUCTION Hyva tipping valves The tipping valve is the most critical component of the hydraulic tipping system as it directly influences the safety, performance and efficiency of the tipper. With this in mind, Hyva has always paid a lot of attention to these components to deliver to the market the safest and the most efficient solution -currently represented by the HT range of tipping valves. The Hyva HT valve series is a complete range of tipping valves to be used for different cylinder types and other applications driven by hydraulic systems. The HT 1220 is a single pressure...

Hyva HT-1150 tipping valves This series of valves is designed to be used with oil flows up to 150 litres per minute. The valves are the optimal choice for systems working with smaller tipping cylinders or with applications where high flow/speed is not the key requirement. The unique design of the housing means that the valve can be mounted either on the tank or directly on the cylinder. The mounting kits for both mounting options are included and delivered with the valve. The working pressure range is from 135 to 250 bar and the maximum working pressure is set by Hyva's well-known concept of...

For direct mounting on • TNK: Hyva tank mounting plate • SAE: SAE inlet of Hyva cylinder 5 Pneumatic connection (Lower) 6 mm 6 Pressure relief cartridge 7 MPC Measure Pressure Cylinder (Pressure gauge point) 8 Adjustment screw (int.hex. 5) (To adjust the lowering speed) SAFETY: HT valve fitted on cylinder (SAE) port provides hose burst safety function hyva.com Subject to change without notice

SPARE PARTS FOR HT-1150 VALVESMOUNTING KITS Mounting kits 14735162 SEAL KITS AND AIR ASSEMBLY PARTS Part no. 14810517 hyva.com Subject to change without notice

HT-1220 TIPPING VALVES INTRODUCTION Hyva HT-1220-SAE tipping valves. This series of valves, which is designed to be used with oil flows up to 220 litres per minute, is the optimal choice for systems working with bigger tipping cylinders or with heavy duty applications where high flow/speed is one of the key requirements. The SAE version is designed to be mounted on the Hyva cylinder directly, using the mounting kit supplied with the valve. This solution provides easy mounting, precise operation of the tipping cylinder and, as an additional safety feature, the HT 1220 SAE acts also as a hose...

For direct mounting on • SAE: SAE inlet of Hyva cylinder 5 Pneumatic connection (Lower) 6 mm 6 Pressure relief cartridge 7 MPC Measure Pressure Cylinder (Pressure gauge point) 8 Adjustment screw (int.hex. 5) (To adjust the lowering speed) SAFETY: HT valve fitted on cylinder (SAE) port provides hose burst safety function hyva.com Subject to change without notice

HT-1220 VALVES We move your world For direct mounting on • TNK: Hyva tank mounting plate 2B T2 Alternative tank connection 5 Pneumatic connection (Lower) 6 mm 6 MPC Measure Pressure Cylinder (Pressure gauge point) 7 Pressure relief cartridge 8 Adjustment screw (int.hex. 5) (To adjust the lowering speed) HYDRAULIC SYMBOL SAFETY: HT valve fitted on cylinder (SAE) port provides hose burst safety function hyva.com Subject to change without notice

SPARE PARTS FOR HT-1220 VALVESMOUNTING KITS 14735208 Mounting kits 14810517 hyva.com Subject to change without notice

SPARE PARTS FOR HT-1220 VALVESCHASSIS MOUNTING BRACKET FOR HT-1220 VALVES Part no.

HT-2220 TIPPING VALVES INTRODUCTION This series of valves is designed to be used with oil flows up to 220 litres per minute with dual maximum working pressure setting. This valve is the optimal choice for multi-functional systems – working, for example, with tipping cylinders and other applications such as walking floor systems or applications where the tipping cylinders on the truck and trailer operate with different working pressures. This is also a very good solution for customers who use two types of cylinders with higher and lower maximum working pressures. This valve is available in TNK...

HT-2220 VALVES We move your world HT-2220-TNK (MECHANICAL SWITCH) Part no. For direct mounting on • TNK: Hyva tank mounting plate Pump connection Tank connection Alternative tank connection Cylinder connection Pneumatic connection (Tip) 6 mm Pneumatic connection (Lower) 6 mm Measure Pressure Cylinder (Pressure gauge point) Pressure relief cartridge (HP) Pressure relief cartridge (LP) Manual pressure selector Adjustment screw (int.hex. 5) (To adjust the lowering speed) HYDRAULIC SYMBOL hyva.com Subject to change without notice

HT-2220 VALVES We move your world HT-2220-TNK (AIR SWITCH) Part no. For direct mounting on • TNK: Hyva tank mounting plate Pump connection Tank connection Alternative tank connection Cylinder connection Pneumatic connection (Tip) 6 mm Pneumatic connection (Lower) 6 mm Measure Pressure Cylinder (Pressure gauge point) Pressure relief cartridge (HP) Pressure relief cartridge (LP) Air switch (AS) 6 mm (Pneumatic pressure selector) Adjustment screw (int.hex. 5) (To adjust the lowering speed) HYDRAULIC SYMBOL hyva.com Subject to change without notice

We move your world SPARE PARTS FOR HT-2220 VALVES MOUNTING KITS Mounting kits 14735208 SEAL KITS AND AIR ASSEMBLY PARTS hyva.com Subject to change without notice

SPARE PARTS FOR HT-2220 VALVESCHASSIS MOUNTING BRACKET FOR HT-2220 VALVES Part no.

PRESSURE CARTRIDGE FOR HT-VALVE & PRESSURE TEST EQUIPMENT We move your world CARTRIDGE PRESSURE RELIEF HT (FOR ALL HT-VALVES) Part no. hyva.com Subject to change without notice

TIPPING VALVES INTRODUCTION These valves are controlled mechanically by a cable system, and the knock-off function can also be activated mechanically. With these features, this valve is a very good choice for smaller trucks without a pneumatic supply system and underbody cylinders. The hydraulic connections are G ½ “. A pressure sensor can be also connected. Mechanical 40 and 80 Ltr. tipping valves These smaller valves are designed for applications with small and medium size cylinders. Valves with oil flow of 40 litres per minute are a very good solution for small underbody cylinders, and...