*mydirectindustry

Catalogs
Hyundai Construction Equipment Americas, Inc.
HX130LCR

HX130LCR

Product catalog summary

Engine Specifications:
The HX130LCR is powered by a Perkins 854F engine, a water-cooled, 4-cycle diesel with 4 cylinders in line, direct injection, and turbocharging. It delivers a gross power of 73.6 HP (55 kW) at 2,200 rpm and a net power of 71 HP (53 kW) at the same rpm. The engine's maximum torque is 43.2 kgf.m (313 lbf.ft) at 1,200 rpm. The engine features a bore and stroke of 99 x 110 mm and a piston displacement of 3,400 cc. It is supported by two 12V batteries and a 24V starting motor.

Hydraulic System:
The hydraulic system includes variable displacement tandem axis piston pumps with a maximum flow of 2 x 126 ℓ/min. The system is equipped with a cross-sensing and fuel-saving pump system, and the relief valve settings are 330 kgf/cm2 for implement circuits and travel, with a power boost setting of 360 kgf/cm2 for boom, arm, and bucket.

Drives & Brakes:
The drive method is fully hydrostatic with an axial piston motor and planetary reduction gear. The maximum drawbar pull is 11,400 kgf, and the maximum travel speed is 5.5 km/hr. The parking brake is a multi wet disc type.

Undercarriage:
The undercarriage features an X-leg type center frame with reinforced box-section track frames. It includes lubricated rollers, idlers, track adjusters with shock-absorbing springs, and a track chain with double or triple grouser shoes.

Operating Weight & Dimensions:
The operating weight of the HX130LCR is approximately 13,495 kg with a ground pressure of 0.37 kgf/cm2. The machine's dimensions include a boom length of 4,300 mm and arm lengths ranging from 1,960 mm to 2,810 mm. The maximum digging reach is 8,220 mm, and the maximum digging depth is 5,570 mm.

Attachments & Buckets:
The machine supports various boom and arm lengths, with bucket capacities ranging from 0.30 to 0.59 m3. All buckets are made from high-strength steel and are suitable for materials with varying densities.

Safety & Control Features:
The cabin is equipped with ISO standard features, including a rise-up type windshield wiper, radio/USB player, and hands-free mobile phone system. Safety features include a rearview camera, AAVM, and multiple safety lock valves.

Additional Features:
The HX130LCR includes intelligent power control, engine auto idle, and shutdown control, as well as a centralized monitoring system with an 8" LCD display. The machine also features a self-diagnostics system and Hi-mate remote management system.

Catalog excerpts

HX130LCR Tier 4 Final Engine HYDRAULIC SYSTEM OPERATING WEIGHT (APPROXIMATE) MAIN PUMP

Open the catalog to page 1

SPECIFICATIONS HX130lcr Tier 4 Final Engine Unit: mm (ft-in) Note : Arm weight includes bucket cylinder, linkage, and pin

Open the catalog to page 2

Lifting Capacity Boom: 4.3 m (14' 1") Capacities based on North American Standard Arm: 2.81 m (9' 3") Configuration in accordance with ISO condition 2 standard. Bucket: 0.40 m3 (0.52 yd3) SAE heaped [§ Rating over front Shoe 500 mm (20") triple grouser, CWT 2,350 kg (5,181 lb) Rating over side or 360 degree Load point height (m / ft) NOTES: 1. Lifting capacities are based on ISO 10567. 3. The Lift-point is bucket pivot mounting pin on the arm (without bucket mass). 2. Lifting capacity of the HX Series does not exceed 75% of tipping load with 4. (*) indicates load limited...

Open the catalog to page 3

Adjustable air suspension seat with heater Cabin FOPS/FOG (ISO/DIS 10262) Level 2 ROPS (Roll Over Protective Structure) Lower frame under cover (Normal) Track shoes * Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine may vary according to International standards. * The photos may include attachments and optional equipment that are not available in your area. * Materials and specifications are subject to change without advance notice. * All imperial measurements rounded off to the nearest pound or inch. PLEASE CONTACT /" A ▲ HYUNDAI CONSTRUCTION...

Open the catalog to page 4

All Hyundai Construction Equipment Americas, Inc. catalogs and technical brochures

Archived catalogs

40TA/15PA-7
2 Pages
R227
4 Pages
R75-7
4 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list