*mydirectindustry

HL960HD

Product catalog summary

Overview: The HL960HD is a heavy-duty loader equipped with a Tier 4 Final Cummins QSB6.7 engine, offering a net power of 222 HP at 2,200 rpm. It features a standard bucket capacity of 3.3 m3 (4.3 yd3) and an operating weight of 19,930 kg (43,940 lb).

Engine Specifications: The engine is a water-cooled, 4-cycle, turbocharged diesel with direct injection and electronic control. It has a gross power of 225 HP and a maximum torque of 148 kg·m at 1,500 rpm. The engine includes a dry, 2-stage dual-element air cleaner and a 24 V, 95 Amp alternator.

Transmission: The HL960HD features a fully automatic power shift transmission with a 3-element, single-stage torque converter. It offers multiple travel speeds with a lockup clutch option, reaching up to 40 km/h (24.9 mph) in forward 5th gear.

Axles and Drive System: The loader has a four-wheel drive system with a rigid front axle and oscillating rear axle, offering a rear axle oscillation of ±12°.

Service Refill Capacities: Key capacities include a 300-liter fuel tank, 27-liter DEF tank, and a 200-liter hydraulic system capacity.

Hydraulic System: The load-sensing hydraulic system includes a variable-displacement piston pump with a flow rate of 246 ℓ/min. It features a 2-spool control valve for the bucket and boom, with system pressure set at 280 kgf/cm2.

Brakes and Steering: The service brakes are hydraulically actuated wet-disc brakes, while the steering system is a load-sensing hydrostatic articulated type with a 40° steering angle.

Tires: Standard tires are tubeless, loader design 23.5 R25, L3, with various optional configurations available.

Dimensions: The HL960HD has an overall length of 8,140 mm and a height of 5,640 mm when fully raised. The bucket pivot height is 4,105 mm.

Cab and Interior Features: The cab is sound-suppressed and pressurized, featuring automatic climate control, a 3” retractable seat belt, and various storage options. It includes a comprehensive lighting system and multiple gauges and indicators for operational monitoring.

Safety and Additional Features: Safety features include a rotating beacon light, rearview camera, and fire extinguisher. The loader is equipped with a Hi-Mate remote management system for mobile and satellite monitoring.

Note: Specifications and equipment may vary by region, and optional equipment is available. Contact your Hyundai dealer for more information.

Catalog excerpts

Tier 4 Final Engine Net Power Operating Weight

Open the catalog to page 1

HL960 HD / DENSITY OF OPERATING MATERIALS HL960 HD / DENSITY OF OPERATING MATERIALS Material Density [t/m3] (lb/yd3) Lift arm Bucket Type Cutting edge Cutting edge Standard General 1-piece bolt-on tooth 3.4 (4.4) lift-arm Purpose 2-piece bolt-on tooth 3.2 (4.2) 2-piece bolt-on tooth and segment edge Cutting edge Cutting edge High-lift General 1-piece bolt-on tooth 3.4 (4.4) arm (XT) Purpose 2-piece bolt-on tooth 3.2 (4.2) 2-piece bolt-on tooth and segment edge

Open the catalog to page 3

* Standard and optional equipment may vary. Contact your Hyundai dealer for mote information. The machine may vary according to International standards. * The photos may include attachments and optional equipment that are not available in your area. * Materials and specifications are subject to change without advance notice. * All imperial measurements rounded off to the nearest pound or inch. CONSTRUCTION EQUIPMENT www.hceamericas.com 6100 Atlantic Blvd., Norcross, GA 30071 TEL (678) 823-7777 FAX (678) 823-7778

Open the catalog to page 4

All Hyundai Construction Equipment Americas, Inc. catalogs and technical brochures

Archived catalogs

40TA/15PA-7
2 Pages
R227
4 Pages
R75-7
4 Pages