Catalogs >
Hyundai Construction Equipment Americas, Inc. >
HA30

HA30
4Pages

Catalog excerpts

Body Volume Powered By Tier 4 Final Scania Engine ENGINE Maker / Model Type Aftertreatment System Power Rating ISO 3046 @ 2100 rpm No. of Cylinders Torque Gross Displacement Bore Diameter X Stroke Air Filter Emissions TRANSMISSION Scania DC 9 Water-cooled, diesel engine with turbo charger and air-toair intercooler EGR / SCR (No DPF) Tier4F 375hp(276kW) 5 (in line) 1873 Nm@1,300 rpm 2.46 gal (9.3 L) 130 X 140 mm 2-stage (main + safety), dry type Complies with TIER4F of emission regulation ELECTRICAL SYSTEM Voltage Battery Battery Capacity Starter Motor Alternator Front Axle Transverse Differential Rear Axle Transverse Differential Torque Distribution (100% Lockable) Lock up function in all gears Electronically controlled automatic transmission with retarder Full time 6X6 drive with two transverse differentials and one longitudinal Inter-axle longitudinal Torque-proportioning differential, integrated into the ZF transmission Limited-slip diff lock with 45% locking ratio mounted directly at transmission Limited-slip diff lock with 45% locking ratio 1/3 to the front axle, 2/3 to the rear axle STEERING SYSTEM Cylinder Standard Max. Steering Angle Emergency Steering Two double-acting The steering is approved according to ISO 5010 15° Ground-driven emergency steering pump ZF 8EP-320 4 mph (6 km/h) 5 mph (8 km/h) 7 mph (11 km/h) 10 mph (16 km/h) 14 mph (23 km/h) 20 mph (32 km/h) 28 mph (45 km/h) 34 mph (55 km/h) 4 mph (6 km/h) 5 mph (8 km/h) 7 mph (11 km/h) 10 mph (16 km/h) Kessler Kessler Hyundai (in house) Service Brakes DRIVETRAIN Torque Converter Maker / Model Travel Speed - Forward 1st 2nd 3rd 4th 5th 6th 7th 8th Travel Speed - Reverse 1st 2nd 3rd 4th Front Hubs Rear Axle + Hubs Rear Tandem Parking Brake Max. Gradient, Parking Brake Retarder Brake System Dual circuit braking system acting on all six wheels, all hydraulic-operated brakes with enclosed oil-cooled wet multiple discs on four hubs (braking force distributed to two hubs by tandem gear wheels) Spring actuated mounted on driveline shaft 15° Automatic transmission retarder standard Complies with ISO3450 CABIN ROPS / FOBS cabin meet ISO 3471 and ISO 3449 Hand and arm vibrations are less than 2.5 ms2 (ISO 5349-2) Whole body vibration is less than 0.5 ms2 (ISO 2631-1) AIR CONDITIONING SYSTEM The air condition system contains fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1,430). The system contains 2.0 kg of refrigerant representing a CO2 equivalent of 2.86 metric tonnes.

Open the catalog to page 1

HA30 Powered By Tier 4 Final Scania Engine HYDRAULIC SYSTEM SERVICE REFILL CAPACITIES 1 variable displacement piston pump for steering, tipping, cooling fan brakes & auxilaries Maximum Pump Output Filtration Main Safety Valve Pressure Tipping Main Safety Valve Pressure return flow filter Steering Circuit Tilt Cylinders Tipping Time Raise Tipping Time Lower 4,061 psi 3,045 psi Single stage, double-acting 12 secs 10 secs BODY Body Volume (Without Tailgate) Body Tipping Angle Level Capacity (with / without tailgate) Heaped Capacity (with / without tailgate) Engine Oil Fuel Tank DEF Tank...

Open the catalog to page 2

Powered By Tier 4 Final Scania Engine Turning radius according to ISO 7457: 25.2 ft (7.68 m) Approach angle front Max. body tip angle Max. Unit: steering angle Front tie in (mm) down height Rear tie down height Load height (SAE 2 : 1) 133 (3395) Inner turning radius Outer turning radius Outer wheel turning radius Corridor width 3395 Rotating beacon Overall w/o tailgate Overall with tailgate Overall body tipped 70˚ Overloading height Over outside front tire 23.5R25 Over outside front tire 750/65R25 70˚ Over mudguard Over mirror operating position Over outside rear tires 23.5R25 Over outside...

Open the catalog to page 3

STANDARD EQUIPMENT ENGINE • Electronically controlled, direct injected, water-cooled, turbo- • Armrest at operator seat charger, air-to-air intercooler - Preheater for easier cold starts - Exhaust brake • Headrest at operator seat HYDRAULIC SYSTEM • Safety belt at operator and instructor seat • Adjustable steering column • Cigarette lighter • 1 variable displacement piston pump for steering & tipping • One return flow filter • Retractable roller sunblind • Tinted safety glass • Gradient meter with anti-flip-over protection system • Sliding window (left & right side) • Payload meter & cycle...

Open the catalog to page 4