*mydirectindustry

Catalogs
HYTORC
HYTORC GRIP-TIGHT Nut Cut Sheet

HYTORC GRIP-TIGHT Nut Cut Sheet

Product catalog summary

Introduction
The HYTORC GRIP-TIGHT™ Nut is designed to enhance the safety and efficiency of wheel installations on heavy-duty trucks and trailers. It eliminates side load influences and provides a safe torqueing process when used with HYTORC Electric Torque tools.

Specifications
The GRIP-TIGHT™ Nut features M22X1.5 threads, a 33mm hex, 27mm height, and a 46mm washer diameter. It complies with SAE J1965 technical requirements and can be used with common impact guns and wrenches.

Design and Functionality
The nut includes a patent-pending washer profile that rotationally couples with the HYTORC reaction socket, eliminating pinch points and side loads. This design supports the use of cordless digital tooling systems, improving installation efficiency, quality, and safety.

Compatibility
The GRIP-TIGHT™ Nut is compatible with next-generation portable electric torque tools, such as the LION GUN® and LITHIUM SERIES® II Electric Torque tools. The proprietary GRIP-TIGHT™ DRIVER part DZAK-HGTN-M22 is used for torquing.

Technical Specifications

Outer Diameter (ØA): 63mm
Diameter at Wrench End (ØB): 56mm
Diameter Deep Well (ØC): 30mm
Length (L): 100mm
Depth of Hex Socket (D): 27mm
Bolt Clearance Depth (E): 61mm
Square Drive: 19mm
Weight: 1.17 kg

Contact Information
For more information or to request a demonstration, contact HYTORC at 1-800-FOR-HYTORC or visit their website at hytorc.com.

Catalog excerpts

QUICK SPECS Scan code for more information. HYTORC GRIP-TIGHT™ Nut HYTORC Part Number: HGTN-M22 Protect your commercial fleet from wheel installation related incidents with the new HYTORC GRIP-TIGHT™ Nut. The GRIP-TIGHT™ Nut is an instant upgrade for all heavy-duty truck and trailer hub piloted wheels. The patent pending GRIP-TIGHT™ Nut eliminates the influence of side loads and provides a pinch point free reaction component for applied torque. The GRIP-TIGHT™ Nut allows for controlled and safe torqueing with HYTORC Electric Torque tools. Call to request a demonstration of HYTORC cordless tooling system in conjunction with the GRIP-TIGHT™ Nut. GRIP-TIGHT™ Nuts can be torqued and loosened with common impact guns and wrenches. The patent pending washer profile includes a special geometry for rotationally coupling to the HYTORC reaction socket. This washer acts as a coaxial reaction point, thereby eliminating pinch points and removing undesirable side loads. These benefits make it feasible to upgrade to cordless digital tooling systems while increasing the efficiency, quality, and safety of wheel nut installations. • GRIP-TIGHT™ Nuts have M22X1.5 threads, 33mm hex, 27mm height and a 46mm washer diameter. The two-piece GRIP-TIGHT™ Nuts comply with technical requirements of SAE J1965. • Cross Reference PN’s: 39773, 39874, 39702, M3979, 39691, 39949, 201.3013, 13-3057, E-9020, W-525, R009020, 511034, KB9020,WA075037, 20857204, 1649492C1, E6HZ-1120-A, MF110343, and

Open the catalog to page 1

FULL SPECIFICATIONS LEGEND : 0A = OUTER DIAMETER 0B= DIAMETER AT WRENCH END 0C = DIAMETER DEEP WELL L = LENGTH D = DEPTH OF HEX SOCKET E = BOLT CLEARANCE DEPTH PART NUMBER 0A 0B 0C L D E SQUARE DRIVE WEIGHT The HYTORC GRIP-TIGHT™ NUT can be torqued using the proprietary GRIP-TIGHT™ DRIVER part DZAK-HGTN-M22 with next-generation portable electric torque tools such as our LION GUN® or LITHIUM SERIES® II Electric Torque tools, all shown above. HYTORC owns all content, copyrights, trademarks and patents in this document. © 2023 HYTORC. Any unauthorized use or distribution of any material from this...

Open the catalog to page 2

HYTORC GRIP-TIGHT Nut Cut Sheet

HYTORC GRIP-TIGHT Nut Cut Sheet

Catalog excerpts

All HYTORC catalogs and technical brochures