*mydirectindustry

TLG-12E300C

Product catalog summary

Specifications:
The document outlines the specifications of a power supply unit. It is ISO 9001:2015 TUV certified and operates with an input voltage range of 180~264V AC, providing a DC output of 12V with an output current of 25.0A and rated power of 300W. The frequency range is 50/60Hz, with an efficiency of 90% and a ripple noise of 2000mV P-P (Max). The AC current is less than 3.1A at 230VAC, with a setup rise time of less than 2000ms (Max) at 230VAC. The AC inrush current is 60A at 230VAC, and the leakage current is 0.75mA at 230VAC.

Protection:
The unit includes overload protection (95%-120% rated power) with auto-recovery after fault removal, and short circuit protection with automatic recovery.

Environment:
Operating temperature ranges from -25°C to +60°C, and storage temperature ranges from -35°C to +65°C. Operating humidity is between 5% and 95%.

Safety & EMC:
The unit complies with safety standards IEC61347 A1 +A13 and EMC standards EN 55015, EN 61547, and EN 61000-3-3. It has a withstand voltage of I/P-FG:1.5KVAC and I/P-O/P:3.0KV AC, with isolation I/P-O/P: >100M Ohms/500VDC/25°C/75%RH.

Weight & Packing:
The product dimensions are 279x85x35mm, with a net weight of 1.63KG. The packing dimension is 455x360x155mm, with a gross weight of 17KG. Each carton contains 10 pieces.

Installation Guide:
It is recommended to use no more than 80% of the rated load to allow for power increases in LED modules or strips. Adequate ventilation is crucial to avoid overheating. The power supply should not be installed in closed spaces, near flammable or explosive objects, or in areas prone to flooding. Correct wire gauge or copper area should be chosen for electrical connections according to the rated current.

Catalog excerpts

LED Power Supply MODEL TLG-12E300C INPUT 180-264VAC Features: -Slimline design with fully sealed aluminum housing -Waterproof IP68,suitable for any Working Environment -With the newest topological structure,average efficiency up to 90% -Protections:Short circuit/Over load -100% full load burn-in test INPUT VOLTAGE FREQUENCY RANGE EFFICIENCY AC CURRENT AC INRUSH CURRENT LEAKAGE CURRENT 180-264VAC (Refer to the derating curve of ‘Loading and Input voltage") 50/60HZ 90% <3.1A@230VAC 60A@230VAC 0.75mA/230VAC DC OUTPUT OUTPUTCURRENT RATED POWER VOLTAGE TOLERANCE RIPPLE NOISE SETUP RISE TIME ■protection OVER LOAD SHORT CIRCUIT 95%-120% rated power, Protection Type:auto-recovery, afterfault condition is removed Protection Type:recovery automatically after fault condition is removed OPERATING TEMPERATURE OPERATING HUMIDITY STORAGE TEMPERATURE -25°C~+60°C (Refer to the derating curve of 'Loading and Ambient temperatuer’) 5%~95% -35°C~+65°C ■ WEIGHT&PACKING SAFETY STANDARDS EMC WITHSTAND VOLTAGE ISOLATION MTBF PRODUCT DIMENSION NET WEIGHT QUANTITY/CARTON PACKING DIMENSION GROSS WEIGHT | LOADING AND INPUT VOLTAGE ■ LOADING AND AMBIENT TEMPERATURE -It is recommended to use no more than 80% of the rated load of a power supply,to have tolerance for the power increase of LED modules or strips when their running temperature goes up. -It is very important to have enough ventilation for a power supply to avoid overheating. -Do not install the power supply in a closed place, or near flammable or explosive objects, or in a place easily flooded. -Choose wires with correct AWG or copper area for electrical connection according to the rated current.

Open the catalog to page 1

HYRiTE ISO 9001:2015 TUV Certified Manufacturer HYRiTE ISO 9001:2015 TUV Certified Manufacturer G:Yellow/Green L:Beown N:Blue A0:2023.10.05

Open the catalog to page 2

TLG-12E300C

TLG-12E300C

Catalog excerpts

All HYRITE Lighting Europe catalogs and technical brochures