Model 3374Pwith 5.5 gallon hopperModel 3375Pwith 5.5 gallonhopper Ports:Inlet port 1 > 1 ٢D > 4 "FNPTOutlet port 1 > 1 ⁄ > 2 "MNPT > knife valve shutoff, inlet ball valve > ball valve shutoff, inlet ball valve > knife valve shutoff, inlet ball valve > ball valve shutoff, no inlet ball valve > ball valve shutoff, inlet ball valve Chemical Eductor with 5.5 gallon hopper and 316 stainless steel venturi with eduction rates as fast as 1 second per gallon. Ideal for mixing liquid and dry chemicals. Robust tank rinse nozzle attached to lid for complete rinsing of dry chemicals. Also includes bottle rinse to triple rinse chemical containers on site. Equipped to fit optional suction lance (part # 3430-0594). Chemical Eductor with 4.5 gallon hopper,allowing it to fit into smaller areas. Features a 316 stainless steel venturi with eduction rates as fast as 1 second per gallon. Tank rinse can be in operation while lid is open for complete rinsing of dry chemicals. Can be used for mixing liquid or dry flowable chemicals. > (used with 3374P-05T5, 3375P-05T5 & 3375P-05T5-01) Suction lance kit includes: 6' suction hose, 3' lance ando-ring sealed coupler.Allows for remote loading of liquid chemical and wettable powders without lifting containers. Powders are evacuated from container without drift danger to operator. > Base kit for mounting Cleanload rigid to floor. Four 3/8" holes provided in base. >

1.All Cleanload valves must be closed prior to starting: inlet ball valve, hopper valve and hopper rinse ball valve.2.Open lid to check for foreign objects which may hinder performance or contaminate the system. 3.Close and lock lid by turning cover clockwise. 4.Divert pump flow to Cleanload inlet line. Apressure of 30 PSI minimum and 150 PSI maximum must be used.Highest pressures increase eduction rate and available wand suction.5.Turn inlet ball valve on (yellow handle). 6.Open hopper valve, located on the bottom of hopper, by pushing handle in. 7.Unlock and open lid slowly by turning cover...

Troubleshooting > SymptomCorrective Action Low eduction rateCheck pump pressure and flow. Cleanload Eductor performance is based on flow and pressure to the system. Note requirements for high eduction rates. Increase outlet hose size back to tank.Plugged or clogged bottle rinse nozzleDisassemble rotary portion of nozzle from lower valve assembly and back flush until nozzle ports are clear of debris.Plugged or clogged tank rinse nozzleDisassemble rotary portion of nozzle from NPThose barb andback flush until nozzle ports are clear of debris. Remove screen and flush with water to clear away foreign...

Model #3375P-05T5-01 has the same parts as Model #3375P-05T5, except part #3 is not included. -9- >

THIS WARRANTY IS EXCLUSIVE. HYPRO MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING BUT NOTLIMITED TO ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Hypros obligation under this warranty is, at HyproҒs option, to either repair or replace the product upon return of the entire product tothe Hypro factory in accordance with the return procedures set forth below. THIS IS THE EXCLUSIVE REMEDY FOR ANY BREACHOF WARRANTY.IN NO EVENT SHALL HYPRO BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, WHETHERFOR BREACH OF ANY WARRANTY, FOR NEGLIGENCE, ON THE BASIS...