*mydirectindustry

HFL010

Product catalog summary

Introduction to Fiber Laser Technology
Fiber laser technology offers solid-state simplicity, efficiency, and reliability. HyIntensity Fiber Laser systems utilize a low-maintenance solid-state laser source, delivering the laser beam through a fiber optic cable to the laser head. This technology allows for flexible table integration without the size restrictions of CO2 lasers and is three times more energy-efficient, making it a cost-effective solution for fine-featured cutting.

System Components and Features
The system includes multiple solid-state pump diodes that generate the laser beam, which is transmitted through a flexible delivery fiber to the laser cutting head. Key components include the optical beam delivery, fiber laser cutting head, fiber laser supply, auto gas selection console, and laser head control console. The system is designed for higher cut speeds, lower operating costs, and higher productivity, especially for material thicknesses below 6 mm.

Advantages of Fiber Laser Cutting
Fiber laser cutting offers several advantages, including the ability to cut more reflective materials like copper and brass, faster cutting speeds, high-quality edge production, and the lowest cost per part. It is easily integrated into a wide range of cutting machines and can be combined with plasma technology for enhanced productivity and quality.

HyIntensity Fiber Laser HFL010
The HFL010 is a fully optimized cutting system with a 1.0 kW fiber laser supply, capable of cutting up to 10 mm mild steel and 6 mm stainless steel. It features a tightly integrated system design for ease of operation and consistent process optimization, with pre-set cutting parameters for various materials and thicknesses. The system includes a fiber laser cutting head with integrated capacitive height control, a laser head control console, and an auto gas selection console.

Specifications and Safety
The system operates at an auto voltage input of 400–480 VAC, with a duty cycle of 100% at 40°C. It meets safety standards with features like safety glasses requirements, external E-stop switch, and door interlock switch. The dimensions are 147 cm (H) x 82 cm (W) x 93 cm (L), and it weighs 196 kg. Gas supply requirements include air at 9 bar, O2 at 8 bar, and N2 at 27 bar. The output power is 1000 W nominal, with an emission wavelength of 1070 ± 10 nm.

Performance and Efficiency
The fiber laser supply is three times more energy-efficient than CO2 lasers, with virtually dross-free cutting capacity for mild steel up to 10 mm. The system is designed for high energy efficiency, with a performance level rated at EN ISO 13849-1 PL E+ and NEMA 12 rated for dust-sealed reliability.

Catalog excerpts

Hylntensity Fiber Laser

Open the catalog to page 1

HyIntensity Fiber Laser For over 40 years, Hypertherm has focused on providing advanced technology products that cut the cost of cutting metal. Now with the advent of fiber laser technology, dramatically reducing laser complexity and operating cost, Hypertherm brings this focus to fine-feature laser cutting in a way only Hypertherm can … making laser cutting easy. iber Laser technology: solid state F simplicity, efficiency, and reliability yIntensity Fiber Laser systems use a lowH maintenance solid-state laser source to generate a laser beam that is delivered through a fiber optic cable to the...

Open the catalog to page 2

yIntensity Fiber Laser HFL010: H a fully optimized cutting system pplications: expanding customer access A to high-precision fine-feature cutting HFL010, a complete fiber laser system specifically optimized for cutting applications, makes it easy to produce consistent laser quality across a full range of materials and thicknesses. More easily integrated into a wider range of cutting machine types (compared with CO2 ) and significantly more affordable to operate, Hypertherm’s HyIntensity Fiber Laser enables more steel fabricators to add high‑precision cutting capability to their operations. •...

Open the catalog to page 3

Specifications Operating data Auto voltage input VAC 400 – 480 Hz 50/60 Duty cycle Amps 30 A/3-PH 100% at 40° C (104° F) Dimensions Weight 196 kg (430 lbs) Gas supply Air: 9 bar (130 psi) O2: 8 bar (115 psi) N2: 27 bar (400 psi) Stainless steel 3810 .075 150 2030 1/8 80 5 147 cm (58.0") H, 82 cm (32.4") W, 93 cm (36.5") L Approximate cutting speed (ipm) 300 3 External door interlock switch with (2) NO contacts Thickness (inches) .036 2 Mild steel External E-stop switch with (2) NO contacts Approximate cutting speed (mm/min.) 7620 1650 3/16 65 6 Safety glasses OD 5+ @ 900 – 950 nm, OD 7+ @ 950...

Open the catalog to page 4

HFL010

HFL010

Catalog excerpts

All Hypertherm, Inc. catalogs and technical brochures

Archived catalogs