*mydirectindustry

hyc50

Product catalog summary

Product Overview: The HYC50 is a 50 kW DC-charging system designed for electric vehicles, capable of delivering up to 97% efficiency under full load. It supports both single vehicle charging at 50 kW and simultaneous dual vehicle charging at 25 kW each. The system is suitable for both indoor and outdoor installations and features a low noise level of less than 50 dBA.

System Specifications: The charger supports CCS1, CCS2 (150 A), and CHAdeMO (125 A) interfaces. It operates within a temperature range of -30°C to +55°C and can be installed at heights up to 4,000 m above sea level. The system is protected with an IP54 rating and IK10 impact resistance. It includes a 10.1” touch screen for user interaction and supports remote management for diagnostics and software updates.

Power Supply: The system operates on a 400 V AC supply with a maximum input current of 90 A. It supports a frequency of 50/60 Hz and has a power factor greater than 0.99 at full load. The system includes integrated lightning protection and has a standby power consumption of 25 W.

Charging Interfaces: The maximum DC output power is 50 kW for a single vehicle or 2 x 25 kW for two vehicles. The output voltage range is 150 Vdc to 1000 Vdc. The system includes a Cable Management System for 4.45 m cables and offers various payment system options.

Norms, Compliance, and Standards: The charger complies with multiple standards including CCS1/2, CHAdeMO 1.2, and supports RFID systems. It is certified by TÜV Süd and complies with EU directives such as RED, ROHS2, ROHS3, WEEE, and REACH. It meets electrical safety standards IEC 61851-1, IEC 61851-23, and others, and supports OCPP 1.6 JSON for communication.

Catalog excerpts

Product data sheet First 50 kW wall mountable fast charger on market 50 kW charging on one vehicle or 2x 25 kW simultaneous charging Low noise level <50 dBA(1) Silent mode Up to efficiency under full load continous charging Bidirectional native design (1)Standard environmental conditions (20° C, 3 m distance;) Product data sheet HYC50 / V1 - 2 © Alpitronic Srl Via di Mezzo ai Piani, 33 39100 Bolzano, Italy [email protected]

Open the catalog to page 1

Product data sheetSystem Specifications System Specifications

Open the catalog to page 2

Product data sheet 3/4 Power Supply AC nominal voltage (RMS) AC maximum input current (RMS) Frequency Network type Controllable PF range THDi (Total harmonic distortion) Power factor Efficiency Overvoltage category Integrated coordinated lightning protection (SPD) Standby power consumption 400 V -15% | +10% 90 A 50 Hz | 60 Hz 3phase TN-C | TN-S | TN-C-S | TT ±0.95 < 5% @ full load > 0.99 (@ full load) up to 97% @ full load OVC III, DIN EN 60664-1 Type 1 + 2 + 3 25 W* *Without payment terminal Maximum total DC output power 50 kW when charging one vehicle 2 x 25 kW in parallel charging mode of...

Open the catalog to page 3

Norms, compliance and standards DC standard protocol (communications with the vehicle) More Information: www.alpitronic.it

Open the catalog to page 4

All HYPERCHARGER catalogs and technical brochures

hyc200
4 Pages
hyc400
4 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list