HYLOBOND M5101
2Pages

HYLOBOND M5101 Description Hylobond M5101 is a toughened, two component acrylic adhesive designed for bonding a wide range of substrates. This structural methacrylate adhesive has superior peel, shear and compressive properties. Hylobond displays high toughness and can be used on gaps up to 15mm. The adhesive has excellent fatigue and weathering resistance. Typical Properties Uncured Material Adhesive Mixing Ratio (By Weight) Mixing Ratio (By Volume) Viscosity (@22 C, cPs) Colour Mixed Material Geltime (@220C) Tensile Strength Elongation Shear Strength PVC/ABS Shear Strength (Aluminium) Shear Strength (Stainless Steel/Acrylic) Recommended Substrates Metals Aluminium, stainless steel, carbon steel, powder coated metals. Plastics Acrylics, ABS, PVC. Information given in this publication is based upon technical data gained in our own and other Laboratories and is believed to be true. However the material is used in conditions beyond our control thus we can assume no liability for results obtained or damages incurred through the application of the data present herein. Hylomar Ltd, Cale Lane, Wigan WN2 1JT UK Tel: +44 (0) 1942 617000 Fax: +44 (0) 1942 617001 Revision date Product name Page 1 Hylobond M5101 Vers

Composites Urethanes, vinyl esters, polyesters, carbon fibre, GRP/FRP. Not suitable for Polyethylene, PTFE, nylon, galvanized metals, polypropylene. Instructions for Use The surface to be bonded can have a great impact on the cured properties of Hylobond. Care must be taken to ensure that all traces of oil, grease and dirt are removed from the substrate. This can be done with a degreasing agent or solvent such as acetone. Abrading or etching the surface can greatly improve the properties of the bonded joint, if this is done a second degreasing process is highly recommended. Prior to...