HYLO CLEAN

HYLO CLEAN

Product catalog summary
Product Overview: Hyloclean is a specially formulated fluid designed for the effective removal of used Hylomar jointing compounds from disassembled joint surfaces. It is also suitable for cleaning and degreasing surfaces before applying Hylomar adhesives and sealants. The product is effective in removing uncured anaerobic, silicone, and epoxy products.
Typical Applications:
  • Removal of Hylomar M, Universal Blue, Advanced Formula, Aerograde, and uncured Hylogrip anaerobic products.
  • Cleaning of Hylobond, acrylic adhesives, and Hylotyte Red.
  • Degreasing metal components by removing oils, lubricants, metal cuttings, and dirt.
Instructions for Use:
  • For removing used Hylomar jointing compound: Spray Hyloclean liberally and wipe away residue with a cloth.
  • For cleaning surfaces before adhesive or sealant application: Spray liberally, wipe clean, and allow solvent to evaporate before applying sealant or adhesive.
  • To remove excess sealant or adhesive: Spray cleaner onto a cloth and wipe away excess, taking care to avoid solvent entering the joint.
Note: Exercise caution around painted and plastic components as the solvent may cause discoloration or softening.
Features:
  • Highly effective at removing most Hylomar products.
  • Suitable for cleaning and degreasing surfaces.
  • Leaves no residue and evaporates quickly.
Contact Information:
  • Hylomar Limited, UK: +44 (0)1942 617000
  • Hylomar GmbH, Germany: +49 (0)2182 570 8971
  • Hylomar LLC, USA: +1 830 634 2603
See more

Catalog excerpts

HYLO CLEAN-1

HYLO CLEAN CLEANER/DEGREASER PRODUCT SHEET Pack sizes – 400ml aerosol Hyloclean is a specially blended fluid that is highly effective at removing used Hylomar jointing compound from disassembled joint surfaces. The unique mix of solvents also make it perfect for cleaning and degreasing surfaces prior to use with any of Hylomar’s range of adhesive and sealants. Hyloclean is also very effective at removing uncured anaerobic, uncured silicone and uncured epoxy products. Typical Applications: + Removing Hylomar M, Universal Blue, Advanced Formula and Aerograde, uncured Hylogrip anaerobic product, Hylobond, acrylic adhesives and Hylotyte Red + Degreasing metal components – will remove most oils, lubricating fluids, metal cuttings and dirt from any metal surface + Hyloclean does not leave a residue and evaporates quickly after application Highly effective at removing most Hylomar products Also can be used for cleaning and degreasing surfaces Does not leave a residue Evaporates quickly after application INSTRUCTIONS FOR USE For the removal of used Hylomar jointing compound: Spray HYLO®CLEAN liberally onto the used Hylomar jointing compound. Immediately wipe away the residue with a cloth. For cleaning surfaces prior to adhesive or sealant application: Spray HYLO®CLEAN liberally onto the surface of the component to be bonded or sealed, wipe clean using a cloth. Leave plenty of time for the solvent to evaporate before applying the sealant or adhesive. To remove excess sealant or adhesive from the joint after assembly, liberally spray the cleaner onto a cloth and wipe away the excess. Take care when spraying directly onto an assembled component as the solvent may get into the joint itself and damage the seal. Care should also be taken around painted and some plastic components as the solvent can discolour and soften paints and plastics Hylomar Limited Hylo House, Cale Lane, Wigan, WN2 1JT, UK | Tel: +44 (0)1942 617000 | Fax: +44 (0)1942 617001 Hylomar GmbH Talstraße 106, 41516 Grevenbroich, Deutschland | Tel: +49 (0)2182 570 8971 | Fax: +49 (0) 2182 5708970 Hylomar LLC 158 J J Lane, Center Point, Texas 78010, USA | Tel: +1 830 63

 Open the catalog to page 1

All Hylomar GmbH catalogs and technical brochures

  1. HYLOGLUE

    1  Page

  2. HYLOGRIP

    1  Page

  3. HYLOSIL

    1  Page

  4. HYLOMAR M

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.