*mydirectindustry

Catalogs
Hydrosila
Hydrostatic transmission for harvesting machines Hydrostatic transmission for harvesting machines

Hydrostatic transmission for harvesting machines Hydrostatic transmission for harvesting machines

Product catalog summary

Overview: The document provides technical specifications and features of the Series H2 hydrostatic transmission designed for harvesting machines. Key benefits include increased power, higher rotating torque, and compact size.

Design Features: The hydrostatic transmission offers high rotating torque, immediate power ramp-up, stepless speed and torque control, overload protection, and a wide range of speed control.

Specifications:

Displacement Codes: 75, 90, 112
Maximum Pressure: 480 bar in high-pressure line
Maximum Case Pressure: 2.4 bar
Maximum Rotating Torque: 417.6 Nm to 617.1 Nm
Speed Range: 50 rpm to 4160 rpm
Rated Power: 103.1 kW to 156.4 kW
Weight: 40 kg to 50 kg (without fluid)

Motor and Pump Information:

Motor Circuit: Fixed displacement axial-piston motor models MFH2.75, MFH2.90, MFH2.112
Pump Circuit: Variable displacement axial-piston pump models PVH2.75, PVH2.90, PVH2.112
Maximum Flow: 296.3 l/min to 391.6 l/min
Maximum Swashplate Angle: ±18 degrees
Weight: 69 kg to 85 kg (without fluid)
Rated Power: 135.3 kW to 199.8 kW

Dimensions and Port Options: Detailed dimensions and port options are provided for different frame sizes and models, including specific measurements for components like shaft options and drain ports.

Contact Information: Hydrosila, Ukraine, Kirovograd. Phone: +38 0522 358337; Fax: +38 0522 358347; Email: [email protected]; Website: www.hydrosila.com

Catalog excerpts

Hydrostatic transmission for harvesting machines Hydrostatic transmission for harvesting machines-1

Hydrostatic transmission for HarVEstinG macHinEs Series H2 dEsiGn fEatUrEs: • Increased power • Higher rotating torque • Rated pressure up to 480 bar • Smaller size • Reduced

Open the catalog to page 1

Hydrostatic transmission for harvesting machines Hydrostatic transmission for harvesting machines-2

Using a hydrostatic transmission you get: - high rotating torque at relatively small size; - ramp up to full power immediately after start-up; - stepless speed and torque control; - overload protection; - wide range of speed control. technical information. pumps series H2 pump circuit Displacement code technical information. motors series H2 Displacement code

Open the catalog to page 2

Hydrostatic transmission for harvesting machines Hydrostatic transmission for harvesting machines-3

FIXED DISPLACEMENT AXIAL-PISTON MOTOR MFH2.75, MFH2.80, MFH2.112 Overall dimensions Port options «A» & «B» Drain ports size Frame Size

Open the catalog to page 3

Hydrostatic transmission for harvesting machines Hydrostatic transmission for harvesting machines-4

Port options «A» & «B». Pump & motor B ISO Frame size

Open the catalog to page 4

All Hydrosila catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list