Interchangeable with all gear pumps of the similar design "Master" series gear pumps in displacements 10, 25, 32, 40, 50, 100 cm3: Completely interchangeable with all gear pumps of the similar design (series "Y", "YK", "B", "D"); GEAR PUMPS Intended to be used in hydraulic systems of rated pressure 160 bar; Are based on gear pumps GP32M-4, GP50M-4, which have good recommendations among the consumers; Are implied for usage on agricultural, construction, road-building, forest, utility and other machines. Nowadays "Master" series gear pumps are supplied to such OEMs as Minsk Tractor Works, Chelyabinsk Tractor Plant, URAL Automobile Plant, Truck Plant, Amkodor, Minsk Automobile Plant, Tashkent Tractor Plant, Bryansk Arsenal Plant, Saranks Dump Mtsensk Engineering Plant KOMMASH, Dormash (Orel), Altai Motor Plant and others. "Master" series gear pumps are a fundamentally new approach to increase the reliability of hydraulic systems of mobile machines. Hydrosila continues improving "Master" series gear pumps and increasing its working life. Hydrosila Ukraine, Kirovograd Phone: +38 0522 358337; 358358; 358317; Fax: +38 0522 358347; 358348 E-mail: [email protected], [email protected] 100 working life APPROVED BENEFIT !

WORKING LIFE is 100% longer and reaches 2 million cycles Increased service life of the whole hydraulic system reduced pulsation of working fluid working life Working life of the pump is 2 million cycles and it's two times longer than ordinary gear pumps of the similar design. STEADY EFFICIENCY during the whole working life For this series were designed more advanced gears with better involute tooth system. This allows to reduce pulsation of working fluid, reduce pump noise and increase service life of the whole hydraulic system. an ordinary gear pump of the similar design Modern materials and...