Typ 47
11Pages

{{requestButtons}}

Catalog excerpts

Typ 47 - 1

Datasheet Type 47 ■ Single rod cylinder according to DIN / ISO 6020/1 "C - With/without end position cushioning jjj) (with same installation dimensions) ^ - Construction of all mounting types by screwing-on of - End position cushioning is precisely adjustable - Generously dimensioned start-up check valves allow a high speed extension with full pressure loading of the effective piston area - The mounting type, the threaded cylindrical design and generously dimensioned guide lengths at the piston rod allow the application of the cylinders under most difficult - Different seals may be mounted on the piston and on the - Hydraulic fluid temperature range: - 20 ... + 80 °C ~ - Piston speed: < 0.5 m/s (higher speeds on request) Hydraulic fluids: - Mineral oils, HFC, HFD liquids in combination with seals made of PTFE and fluoric elastomeres - HFAand HFB liquids on request cylinders - drives - special solutions Special design

Open the catalog to page 1
Typ 47 - 2

Datasheet Type 47 ■ Single rod cylinder according to DIN / ISO 6020/1 cylinders - drives - special solutions Description: Basic form Description: Foot mounting Description: Flange head end Description: Trunnion Description: Threaded holes head end Description: Rectangular flange head end Description: Rectangular flange cap end Description: Flange on cylinder

Open the catalog to page 2
Typ 47 - 3

Type 47 ■ Single rod cylinder according to DIN / ISO 6020/1 Mounting type 00: Basic form; ISO-des. Mounting type 03: Flange head end; ISO-des.: MF 3 Mounting type 05: Rod eye; ISO-des.: MP 3 Mounting type 08: Rod end bearing; ISO-des.: MP 5 cylinders - drives - special solutions Mounting type 02: Foot mounting; ISO-des.: MS 2 Mounting type 11: Threaded holes head end; ISO-des: MX 5

Open the catalog to page 3
Typ 47 - 4

Mounting types Datasheet Type 47 · Single rod cylinder according to DIN / ISO 6020/1 stroke Mounting type 13: Rectangular flange head end; ISO-des: MF 1 stroke Mounting type 33: Flange on cylinder; ISO-des: -- stroke stroke Mounting type 14: Rectangular flange cap end; ISO-des: MF 2

Open the catalog to page 4
Typ 47 - 5

Datasheet Type 47 ■ Single rod cylinder according to DIN / ISO 6020/1 cylinders - drives - special solutions Rod end = piston rod ends which correspond to dimensions Mt. = mounting types which correspond to dimensions

Open the catalog to page 5
Typ 47 - 6

Datasheet Type 47 ■ Single rod cylinder according to DIN / ISO 6020/1 ^'V' HYDRO/W£Z/ cylinders - drives - special solutions Mt. = mounting types which correspond to dimensions

Open the catalog to page 6
Typ 47 - 7

Datasheet Type 47 ■ Single rod cylinder according to DIN / ISO 6020/1 ^'V' HYDRO/W£Z/ cylinders - drives - special solutions Connections: Standard position of connections is side 1 for all mounting types. Connections in different positions are available on request. Cushioning: The standard position of the adjustment screw for cushioning depends on the piston diameter: Different positions are available on request. Standard position of the adjustment screw for air bleed is side 5 for all mounting types. Air bleed screws in different positions are available on request. If the connections are...

Open the catalog to page 7
Typ 47 - 8

Datasheet Type 47 · Single rod cylinder according to DIN / ISO 6020/1 Single components 8 F 7 32 6 6 18 5 16 1 20 4 3 A-A ( 1 : 2 ) 3.2 3.1 10 15 14.5 15 3.2 2 21 4 1 F 30 A B E E B D 115 116 22 7.5 27 11 115 D A 116 B-B ( 1 : 2 ) 94 94 C C B B Für diese Zeichnung behalten wir uns alle Rechte vor! Allgemeintoleranzen nach ISO 2768-mH von 0 bis 0,5 = ±0,1 Maßstab -Format DIN A3 93 über 0,5 über 6 über 30 über 120 über 400 über 1000 über 2000 bis 6 bis 30 bis 120 bis 400 bis 1000 bis 2000 bis 4000 0,1 0,2 0,3 0,5 1,2 2,0 0,8 Datum Name Bearb. 04.01.10 VB Gepr. . . Norm Spare parts Piston rod...

Open the catalog to page 8
Typ 47 - 9

Datasheet Type 47 ■ Single rod cylinder according to DIN / ISO 6020/1 cylinders - drives - special solutions Calculation of buckling strength 1. Determine the necessary length La of the piston rod (including stroke). 2. Define the effective buckling length Skv with the help of the table. 3. Identify the allowable buckling length SK,ZUI. using the diagram. 4. The effective buckling length must be less than or equal to the allowable buckling length. Effective buckling length Skv Mounting type Effective buckling length Mounting type Effective buckling length

Open the catalog to page 9
Typ 47 - 10

Datasheet Type 47 ■ Single rod cylinder according to DIN / ISO 6020/1 cylinders - drives - special solutions O) Allowable buckling length Sk.zui.

Open the catalog to page 10
Typ 47 - 11

Datasheet Type 47 ■ Single rod cylinder according to DIN / ISO 6020/1 Ordering Code Standard Cylinders / Standard Cylinders DIN/ISO cylinders - drives - special solutions Classification / order number |Abbr. [Characteristics 3) mounting type 13 (14) for type 57: longitudinal bores, sinks on rear (front) * type 41: standard for piston diameter = 12, 15,20 (S) = standard design, not for all forms of construction

Open the catalog to page 11

All HYDROPNEU catalogs and technical brochures

  1. STZ

    2 Pages

  2. SERIE VRE160

    16 Pages

  3. SERIE HM125

    28 Pages

  4. Typ 53

    10 Pages

  5. Typ 44

    5 Pages

  6. Typ 41 od

    6 Pages

  7. Typ 41 md

    10 Pages

  8. Our Products

    2 Pages