Catalogs >
HYDROPNEU >
Special Cylinders · Hydraulic Cylinder with Cooling

Special Cylinders · Hydraulic Cylinder with Cooling
2Pages

Catalog excerpts

Special Cylinders · Hydraulic Cylinder with Cooling - 1

Hydraulic Cylinder with Cooling Function: Hydraulic cylinders with integrated cooling discharge heat using various methods or their combination. Cooling through housing and fresh air injection. In this way, the entire cylinder can be cooled to a certain extent. Cooling through circulation of cooling liquid around the cylinder tube. This is applied to Hydropneu type 44 for example. The cylinder tube is designed with double-walls and a separate cooling circuit can be connected. This traps a large proportion of radiant heat and the cylinder and the fluid are getting cooled over a large area. This system may be optimized using a restricted guidance of the cooling fluid, e.g. through included twists. A further option is cooling with milled cooling channels throughout the cylinder. Herewith, certain areas can be cooled selectively. This enables for example to derive heat even in the thermally sensitive area of the cylinder head. The piston rod can also be cooled to extend the lifetime of piston rod seals. Hydropneu engineers the optimal cooling system according to the requirements and installation situation.

Open the catalog to page 1

Special Cylinders · Hydraulic Cylinder with Cooling - 2

Hydraulic Cylinder with Cooling References: Oskar Frech KSM Castings Daimler AG Fields of duties and requirements: Many hydraulic components are sensitive to heat. Generally, hydraulics is designed for maximum temperatures of 65° C. Technical information: piston diameter 40 – 200 mm stroke lengths up to 1000 mm Exceeding temperatures cause several consequences. If the seals get to their temperature limit and beyond, the wear increases and leakage occurs. The material, particularly of the piston rod, may be affected through extreme temperatures (e.g. in foundries). This could lead to...

Open the catalog to page 2