Flush Mount Microwave Moisture Sensor for Mixers and Conveyors CONCRETE • AGGREGATES • ASPHAL

Hydro-Mix Flush mount, digital, microwave moisture sensor The Hydro-Mix is a rugged, microwave moisture measurement sensor designed to be installed flush with the floor of a mixer, chute or conveyor in process control environments. Reading at 25 times per second and combined with onboard functionality such as signal processing, smoothing and averaging, the Hydro-Mix accurately measures the moisture content of material as it passes over the ceramic faceplate. Remote configuration, calibration, diagnostics and firmware upgrades are simple using Hydronix HydroCom software. The linear output allows direct...

Typical Installation All types of static pan, horizontal shaft and ribbon mixer. Also suitable for installation in screw conveyors, chutes and other flush mount applications. For rotating pan mixers the Hydro-Probe Orbiter Sensor is recommended. Connectivity Up to 16 sensors may be daisy chained to connect directly to a control system via the RS485 serial communications link. Hydro-Control Connection Provides a complete system to control Direct Connection to Control System moisture in a mixing application. The analogue or serial interface integrates connection to an operator interface or a easily...

Technical Information Construction Refresh Rate Digital (Serial) Communication Body: Stainless Steel Faceplate: Ceramic Protection Ring: Hardened Steel Fixing The sensor requires a 127mm (5”) hole to be cut. A Fixing Plate is welded around the hole and the sensor is secured to the Fixing Plate using the Adjustable Clamp Ring. The clamp ring allows easy installation, extraction and adjustment of the sensor. Operating Temperature 0-60° C. The sensor will not measure ice. RS232 converter, Ethernet and USB interfaces available. Analogue Outputs Programming details to access sensor values and Two...