High Temperature Digital Microwave Moisture Sensor Hydro-Mix HT High Temperature GRAIN : FEED : NUTS : GRANULES

Hydro-Mix HT High temperature, flush mount, digital moisture sensor The Hydro-Mix HT has been designed to be installed in drying, ducting, conveying and mixing systems in process control environments where the operating temperature is high. Reading at 25 times per second and combined with on-board functionality such as signal processing, smoothing and averaging, the Hydro-Mix HT accurately measures the moisture content of material as it passes over the ceramic faceplate. Remote configuration, calibration, diagnostics and firmware upgrades are simple using Hydronix Hydro-Com software. The linear...

Typical Installation into Mixers or Conveyors The Hydro-Mix HT can be mounted in many different locations where there is a continuous flow of material across the ceramic faceplate. These can include drying, ducting, conveying and mixing systems. Installation into Ducting Hydronix has developed a ducting system for the HydroMix HT sensor. This makes it simple to install the sensor in exactly the right position to achieve the most precise moisture measurement results. Hydronix recommends that our system is used in all ducting applications as it will easily allow us to support the Hydro-Mix HT. The...

Technical Information Construction Refresh Rate Extension Cable Body: 316 Stainless Steel (Food Safe). Six twisted pairs, 22AWG, 0.35mm2 conductors. Screen braid with 65% minimum coverage plus aluminium/polyester foil. Maximum cable run of 100m Faceplate: Ceramic (Food Safe). Internal Seals: FDA Approved O-Rings. Fixing The sensor is flush mounted with the internal wall of the installation using the included mounting assembly. Measurement Range Moisture: 0-100%, material dependant. Depth: Approx. 75-100mm, material dependant. Operating Temperature Process: Continuous 0-120°C. Intermittent: 120-130°C...