700-10
700-10
- Pressure Medium: Hydraulic oil with viscosity ranging from 10 to 68 mm²/s (ISO VG 10 to 68 according to DIN 51 519).
- Valve Element: The non-pilot controlled version uses a ball as the valve element, while the pilot-controlled version includes a spherical grinded valve piston with an integrated ball check valve.
- Operating Pressure: Maximum of 500 bar.
- Flow Rate: Maximum of 55 l/min for certain models.
- The pilot-controlled version features a throttle opening that dampens the pilot opening movement, suppressing pressure surges in the load volume.
- Minimum opening pressure is reduced, making it suitable for swing clamp cylinders.
- ERSV-500-5-004: Spring-loaded poppet valve, leakage-free, with G1/2 main passage and G1/4 control port.
- ERSV-500-5-002: Similar to the above but with pilot control.
- ERSV-500-5-001: Smaller variant with G1/4 main passage and control port, suitable for lower flow rates.
Catalog excerpts
CHECK VALVES for pipeline installation, hydraulic pilot operated, pmax. 500 bar Description: These hydraulic check valves are part of the shut-off valves according to DIN ISO 1219. With a hydraulic inlet in the connection Z the blocked flow A→B can be opened. The flow B→A is permanently open. Pressure medium: Hydraulic oil 10 68 mm²/s, (ISO VG 10 to 68 according to DIN 51 519) The valve version with pilot control contains a spherical grinded valve piston with an integrated ball check valve. Already when opening the valve piston a throttle opening is released during the unlocking process. This dampens the pilot opening movement of the unlocking piston. Pressure surges in the load volume are suppressed by that. The pilot control ensures a lower opening pressure which is suitable especially for for swing clamp cylinders. The check valves without pilot control feature a ball as a valve element. Other designs are available on request A Application: The check valves serve for blocking the supply line in the application of hydraulic cylinders. The check valve with pilot control is ideal for high operating pressure and high consumer volume. Type Connection Installation position Pilot control Main passage A, B Control port Z Control volume Operating pressure pmax. Volume flow Qmax. c d e A/F Weight approx. Order no.: Z ∆p-Q nominal line for flow direction B→A and A→B (unblocked) 10 Minimum opening pressure pZ at pressure pA (pB = 0 bar) Flow rate Q [l/min] Oil viscosity at measurement 60 mm²/s Hydraulische Komponenten GmbH (1) Order no. ERSV-500-5-001 (2) Order no. ERSV-500-5-004 (3) Order no. ERSV-500-5-002 700-10 / 09-15 *Subject to change without notice, compare issue no. at www.hydrokomp.de. Siemensstraße 16, 35325 Mücke (Germany) Phone: +49 6401 225999-0 Fax: +49 6401 225999-50 E-mail: [email protected] Internet: www
Open the catalog to page 1
