Catalog excerpts
MOUNTING TOOLS for replacement of system seals at coupling mechanisms Webcode: 010005 We also design and manufacture special tools Mounting tool with inserted system seal prior to pressing into the coupling mechanism Cost-reducing equipment Innovation starts in detail: Replacing the system seal: Long service life of the coupling mechanisms Coupling mechanisms by HYDROKOMP are designed in such a way that the front system seal can be replaced. Pull out the old damaged system seal from the pilot groove by a scriber. Minimised machine down time This seal is subject to wear in dailly use as a result of contamination and metal fillings. Insert the new system seal into the peak of the mounting tool manually and set the tool to position above the coupling mechanism. Higher availability of machine tools If the coupling mechanism itself shows no damage the system seal can be replaced separately. This can be done by the user or external service personnel. HYDROKOMP has developed a suitable mounting tool to realise the replacement of the system seal simply and safe. Through manual pressure insert the system seal exactly and in correct bearing position into the axial groove of the coupling mechanism. Ist replacement is simple to handle and can be done in only a few minutes to make the coupling mechanism ready for the next use. Preventive maintenance possible Appropriate system seals available Order numbers: Nominal diameter: Mounting tool System seal, red(1) System seal, yellow(1) System seal red = for coupling without pressure, yellow = for coupling under pressure Packaging unit = 10 pcs. Hydraulische Komponenten GmbH Siemensstraße 16, 35325 Mücke (Germany) Phone: +49 6401 225999-0 Fax: +49 6401 225999-50 E-mail: info@hydrokomp.de Internet: www.hydrokomp.de 100-5 / 11-19 *Subject to change without notice, compare issue no. at www.hydrokomp.de.
Open the catalog to page 1Screw-in tools for coupling elements Screw-in tools: Order numbers: There are different screw-in tools for coupling mechanisms and coupling nipples available. They differ in their pin assignment and various nominal diameters. The screw-in tool can be tightened for example by a cordless powered screwdriver or wrench. These tools are used to screw the coupling mechanisms and coupling nipples secure into the housing. 100-5 / 11-19 *Subject to change without notice, compare issue no. at www.hydrokomp.de. suitable for Coupling mechanism Coupling nipple Coupling mechanism Coupling nipple Coupling...
Open the catalog to page 2