THROTTLE CHECK VALVES single valve with threaded pipe connection, pmax. 500 bar Other designs are available on request Technical data: Type Variation Adjustability Max. operating pressure (pmax.) Max. volume flow(1) (Qmax.) Weight approx. Order no. The throttle check valve belongs to the flow control valves. The throttle check valve is used with single- and double-acting consumers. Herewith, it affects the volume flow. Throttle check valve Single valve for pipeline connection Can be adjusted manually 500 15 - Throttled flow from GF - Free flow from Flow FG Value applies to a fully opened valve and a resistance to flow of approx. 50 bar in throttled direction. Easy adjustable by hand throttle Easy installation by threaded connections Installation without additional fastening materials possible p-Q nominal lines (guide values) for kinematic oil viscosity during the -6 measurements 36 x 10 m²/s., throttle fully opened; Flow GF Suitable for single-acting and double-acting consumers Volume flow Q (l/min) Volume flow Q (l/min) Hydraulische Komponenten GmbH Siemensstraße 16, 35325 Mücke (Germany) Phone: +49 6401 225999-0 Fax: +49 6401 225999-50 E-mail: [email protected] Internet: www.hydrokomp.de 700-15 / 02-13 *Subject to change without notice, compare issue no. at www.hydrokomp.de