PULL/PUSH CYLINDERS Metal wiper (upon request) Speed control valve (upon request) Compensated guide system, highly precise and sturdy The linear pull cylinders of the CT series are equipped with a clearance-compensating piston guide system designed to minimize wear. They are thus particularly suited for long operating times. When mounting the clamp arm or accessories to this cylinder type, the piston rod must be fixed in order not to expose the compensated guide system to uncontrolled forces, as this would lead to damage or malfunctions of the equipment.

PULL/PUSH CYLINDERS

CT16.0 FD DOUBLE-ACTING PULL/PUSH CYLINDER WITH UPPER FLANGE AND ANTIROTATION DEVICE Max. oPERATING PRESSURE = 500BAR : Retraction [B : Extension 23.6 INSTALLATION DIMENSIONS WITH O-RING CONNECTION Included in the scope of supply: • Mounting screws M6x40 DIN 912/12.9 grade • O-rings 04.34x3.53 Material: • Piston/rod: Case-hardened steel, ground. • Body: Free machining steel, nitrocarburized. Options: • Different swinging angles available upon request (order code as for the SR series, see page 38 Example: CT16.0FDR90) • The cylinder can also be ordered without antirotation device (order no....

CT16.0 CD DOUBLE-ACTING PULL/PUSH CYLINDER WITH CARTRIDGE BODY AND ANTIROTATION DEVICE Installation dimensions Through-hole mounting Ø39 H8 Ø37.5H8 2 Blind hole mounting Included in the scope of supply: • Mounting screws M6x20 DIN 912/12.9 grade Material: • Piston/rod: Case-hardened steel, ground. • Body: Free machining steel, nitrocarburized. Options: • Different swinging angles available upon request (order code as for the SR series, see page 38 Example: CT16.0CDR90) • The cylinder can also be ordered without antirotation device (order no. CT16.0CDN). Effective piston area Note: Clamping force...

DOUBLE-ACTING PULL/PUSH CYLINDER WITH UPPER FLANGE CT22.0 FD AND ANTIROTATION DEVICE : Retraction : Extension 28.7 INSTALLATION DIMENSIONS WITH O-RING CONNECTION Included in the scope of supply: • Mounting screws M6x40 DIN 912/12.9 grade • O-rings 04.34x3.53 Variant: • Overload clutch (upon request). • Metal wiper (upon request). Material: • Piston/rod: Case-hardened steel, ground. • Body: Free machining steel, nitrocarburized. Options: • Different swinging angles available upon request (order code as for the SR series, see page 38 Example: CT22.0FDR90) • The cylinder can also be ordered without antirotation...

CT22.0 CD DOUBLE-ACTING PULL/PUSH CYLINDER WITH CARTRIDGE BODY AND ANTIROTATION DEVICE MAX. OPERATING PRESSURE = 500BAR : Retraction : Extension INSTALLATION DIMENSIONS Blind hole mounting Options: • Different swinging angles available upon request (order code as for the SR series, see page 38 Example: CT22.0CDR90) • The cylinder can also be ordered without antirotation device (order no. CT22.0CDN) Included in the scope of supply: • Mounting screws M6x20 DIN 912/12.9 grade Material: • Piston/rod: Case-hardened steel, ground. • Body: Free machining steel, nitrocarburized. effective total oil...

CT28.0 FD DOUBLE-ACTING PULL/PUSH CYLINDER WITH UPPER FLANGE AND ANTIROTATION DEVICE MAX. OPERATING PRESSURE = 500BAR INSTALLATION DIMENSIONS WITH O-RING CONNECTION Included in the scope of supply: • Mounting screws M6x40 DIN 912/12.9 grade • O-rings 04.34x3.53 Variants: • Overload clutch (upon request). • Metal wiper (upon request). Material: • Piston/rod: Case-hardened steel, ground. • Body: Free machining steel, nitrocarburized. Options: • Different swinging angles available upon request (order code as for the SR series, see page 38 Example: CT28.0FDR90) • The cylinder can also be ordered...

CT28.0 CD DOUBLE-ACTING PULL/PUSH CYLINDER WITH CARTRIDGE BODY AND ANTIROTATION DEVICE METAL WIPER (UPON REQUEST) Blind hole mounting Included in the scope of supply: • Mounting screws M8x25 DIN 912/12.9 grade Material: • Piston/rod: Case-hardened steel, ground. • Body: Free machining steel, nitrocarburized. Note: Clamping force diagram, see page 91 Options: • Different swinging angles available upon request (order code as for the SR series, see page 38 Example: CT28.0CDR90) • The cylinder can also be ordered without antirotation device (order no. CT28.0CDN) Effective piston area

CT35.0 FD DOUBLE-ACTING PULL/PUSH CYLINDER WITH UPPER FLANGE AND ANTIROTATION DEVICE Max. oPERATING PRESSURE = 500BAR INSTALLATION DIMENSIONS WITH O-RING CONNECTION Included in the scope of supply: • Mounting screws M10x45 DIN 912/12.9 grade • O-rings 04.34x3.53 Variants: • Overload clutch (upon request). • Metal wiper (upon request). Material: • Piston/rod: Case-hardened steel, ground. • Body: Free machining steel, nitrocarburized. Options: • Different swinging angles available upon request (order code as for the SR series, see page 38 Example: CT35.0FDR90) • The cylinder can also be ordered...

CT35.0 CD DOUBLE-ACTING PULL/PUSH CYLINDER WITH CARTRIDGE BODY AND ANTIROTATION DEVICE Max. oPERATING PRESSURE = 500BAR INSTALLATION DIMENSIONS RETRAC. EXTEN. RETRAC. EXTEN. Note: Clamping force diagram, see page 101

LINEAR BLOCK CYLINDERS

EAR BLOCK C CYLINDER TYPE In the standard version, linear BS block cylinders of HYDROBLOCK are not equipped with a piston rod guide system. For this reason, no particular measures are required when mounting accessories to this cylinder type. We recommend, however, fixing the piston rod when screwing in the mounting screw. NOTE: In addition, a stop should be provided on the mounting support behind the cylinder in order to prevent resulting shear forces from acting exclusively on the mounting screws.

BS10.16 DOUBLE-ACTING BLOCK CYLINDER WITH FLANGE MAX. OPERATING PRESSURE = 500BAR ,A : Extension : Retraction INSTALLATION DIMENSIONS Attention: We recommend providing a stop (“X" in the figure) on the cylinder mounting support in order to prevent resulting shear forces from acting exclusively on the mounting screws. Included in the scope of supply: • Mounting screws M6x45 DIN 912/12.9 grade • O-Rings 06.07x1.78 Material: • Piston/rod: Case-hardened steel, ground. • Body: Free machining steel, nitrocarburized. Note: Customized versions are available upon request. Please contact HYDROBLOCK if...