Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Hydro-Vacuum
  3. Vertical pumps „in-line” OPF type

Vertical pumps „in-line” OPF type

Vertical pumps „in-line” OPF type
1 / 38 PagesView full catalog

Vertical pumps „in-line” OPF type

Product catalog summary
Application
OPF-type vertical pumps are designed for pumping treated drinking water and other media with viscosities up to 200 mm2/s, within material resistance limits. They operate at a maximum pressure of 16 atm, extendable to 25 atm with special designs, and are used in ZHF-type pressure boosting systems by Hydro-Vacuum S.A.
Construction
The pumps are vertical multistage rotodynamic with an "in-line" system for suction and discharge ports. They are powered by a standard flange-mounted electric motor with IP55 protection and temperature class F. Axial forces are managed by a maintenance-free rolling bearing, and radial forces by a slide bearing lubricated by the pumped medium. The pump shaft uses a single face mechanical seal.
Operating Data
Capacity: up to 118 m3/h
Delivery head: up to 320 m
Pumped liquid temperature: -15°C to 120°C
Motor power: 0.37 kW to 45 kW (50 Hz)
Materials Used
Pumps are available in standard and special material versions, using AISI 304 or AISI 316 stainless steel for key components, tungsten carbide for sliding bearings, and grey cast iron for the pump base and motor support casing.
Product Designation Structure
The product designation includes codes for construction type, size, dimension, number of stages, and material version, aiding in pump selection and spare parts ordering.
Constructional Versions
Different versions are available, indicated by codes for motor adaptation, valve type, and discharge port type, catering to various temperature ranges and flange types.
Completeness of Supply
The supply includes the pump with or without coupling and electric motor, depending on the version.
Type Size and Dimensions
Various type sizes and dimensions for OPF vertical pumps are listed, detailing the number of stages and specific dimensions for each type.
Characteristics and Dimensions
Detailed characteristics and dimensions are provided for each OPF type (0-9), including capacity, delivery head, power, efficiency, and NPSH values, with graphs illustrating these characteristics across different capacities.
Overview
The document provides technical specifications and characteristics of pump units by Hydro-Vacuum S.A., highlighting models OPF.7, OPF.8, and OPF.9, with data on power, dimensions, weight, and performance metrics.
Specifications
Each pump unit is identified by a unique code, with specifications such as power output, dimensions, and weight. For example, the OPF.7.08 model has a power of 29.00 kW, dimensions of 658 mm and 1276 mm, and a weight of 338 kg.
Performance Characteristics
Graphs illustrate the relationship between capacity, delivery head, power, and efficiency, aiding in understanding operational efficiency and performance under different conditions.
Dimensions and Weight
Detailed dimensions and weight for each pump model are provided, crucial for installation and operational planning. For instance, the OPF.8.A1 model has dimensions of 306 mm and 550 mm, with a weight of 83.8 kg.
Contact Information
Hydro-Vacuum S.A. is located in Grudziądz, Poland, with contact details for their export department, including phone, fax, website, and email for inquiries.
Company Background
Hydro-Vacuum S.A. has a long history of designing, manufacturing, and selling millions of pumps, with a large base of satisfied clients both in Poland and internationally.
See more

Catalog excerpts

Vertical pumps „in-line” OPF type-1

Vertical pumps „in-line” OPF type

 Open the catalog to page 1
Vertical pumps „in-line” OPF type-2

www.hv.pl [email protected]

 Open the catalog to page 2
Vertical pumps „in-line” OPF type-3

GENERAL DATA Application OPF-type vertical pumps are designed for pumping and increasing the pressure of treated drinking water, not containing abrasive and long-fibre additives. The OPF pumps may be also used to pump media other than water, provided that their viscosity does not exceed 200 mm2/s, their corrosiveness being within the corrosion resistance limits of the used construction materials. Maximum operating pressure: pmax = 16 atm (for the special design pmax = 25 atm.) The OPF-type pumps are applied in ZHF-type pressure boosting systems produced by Hydro-Vacuum S.A. Construction Vertical...

 Open the catalog to page 3
Vertical pumps „in-line” OPF type-4

Materials used in the pumps GENERAL DATA The pumps are manufactured in two material versions. Pump type www.hv.pl ul. Droga Jeziorna 8, 86-303 Grudzi^dz, Polska

 Open the catalog to page 4
Vertical pumps „in-line” OPF type-5

Product designation structure All the basic information about the pump is coded in its labelling. This labelling is included both in this catalogue as well as on the rating plate of the pump. Not only does this make it easier for our clients to choose the most suitable pump, but also to contact us during its operation, e.g. when ordering spare parts. The pump labelling code is compiled according to the following pattern constructional version of the pump as in Constructional version subparagraph material version of the pump as in Material version subparagraph completeness of supply as in Completeness...

 Open the catalog to page 5
Vertical pumps „in-line” OPF type-6

Completeness of supply „h” 2 - pump with coupling 5 - pump with coupling and electric motor List of type sizes and typ e dimensions for OPF vertical pumps Pump type www.hv.pl ul. Droga Jeziorna 8, 86-303 Grudzi^dz, Polska

 Open the catalog to page 6
Vertical pumps „in-line” OPF type-7

GENERAL DATA 1. Lower casing 2. Impeller 3. Stator 4. Jacket 5. Sealing casing 6. Pump shaft 7. Sliding bearing 10. Pump base 11. Motor support casing 12. Motor reduction flange 13. Mechanical seal 14. O-ring 15. Perforated pan 16. Upper cover 17. Plug HYDRO-VACUUM®s a ul. Droga Jeziorna 8, 86-303 Grudzi^dz, Polska www.hv.pl

 Open the catalog to page 7
Vertical pumps „in-line” OPF type-8

Construction of OPF.6-9 pumps 1. Lower casing 2. Impeller 3. Stator 4. Stator flange 5. Jacket 6. Sealing casing 7. Pump shaft 17. Suction casing 18. Upper cover 19. Seal stopper sleeve 20. Upper casing 21. Sliding bearing 22. Plug 23. Air vent 10. Nut with intermediate sleeve 13. Motor support casing 14. Motor reduction flange www.hv.pl ul. Droga Jeziorna 8, 86-303 Grudzi^dz, Polska

 Open the catalog to page 8
Vertical pumps „in-line” OPF type-9

NPSHr [m] r| Efficiency [%] P Power [kW] H Delivery head [m]

 Open the catalog to page 9
Vertical pumps „in-line” OPF type-10

Q Capacity [m3/hr] www.hv.pl [email protected]

 Open the catalog to page 10
Vertical pumps „in-line” OPF type-11

Pump unit code HYDRO-VACUUM®s a ul. Droga Jeziorna 8, 86-303 Grudzi^dz, Polska www.hv.pl

 Open the catalog to page 11
Vertical pumps „in-line” OPF type-12

Q Capacity [m3/hr] www.hv.pl [email protected]

 Open the catalog to page 12
Vertical pumps „in-line” OPF type-13

NPSHr [m] r| Efficiency [%] P Power [kW] H Delivery head [m] CHARACTERISTICS 0,5 ul. Droga Jeziorna 8, 86-303 Grudzi^dz, Polska www.hv.pl

 Open the catalog to page 13
Vertical pumps „in-line” OPF type-14

www.hv.pl ul. Droga Jeziorna 8, 86-303 Grudzi^dz, Polska

 Open the catalog to page 14
Vertical pumps „in-line” OPF type-15

www.hv.pl [email protected]

 Open the catalog to page 15
Vertical pumps „in-line” OPF type-16

Q Capacity [m3/hr] www.hv.pl [email protected]

 Open the catalog to page 16
Vertical pumps „in-line” OPF type-17

ul. Droga Jeziorna 8, 86-303 Grudzi^dz, Polska www.hv.pl

 Open the catalog to page 17
Vertical pumps „in-line” OPF type-18

Q Capacity [m3/hr] www.hv.pl ul. Droga Jeziorna 8, 86-303 Grudzi^dz, Polska

 Open the catalog to page 18
Vertical pumps „in-line” OPF type-19

www.hv.pl [email protected]

 Open the catalog to page 19
Vertical pumps „in-line” OPF type-20

Pump unit code www.hv.pl ul. Droga Jeziorna 8, 86-303 Grudzi^dz, Polska

 Open the catalog to page 20
Vertical pumps „in-line” OPF type-21

www.hv.pl [email protected]

 Open the catalog to page 21
Vertical pumps „in-line” OPF type-22

Q Capacity [m3/hr] www.hv.pl [email protected]

 Open the catalog to page 22
Vertical pumps „in-line” OPF type-23

DIMENSIONS OPF.4 ( T ) OPF.4 ( F ) Pump unit code ul Droga Jeziorna 8, 86-303 Grudzi^dz, Polska www.hv.pl

 Open the catalog to page 23
Vertical pumps „in-line” OPF type-24

Q Capacity [m3/hr] www.hv.pl [email protected]

 Open the catalog to page 24
Vertical pumps „in-line” OPF type-25

www.hv.pl [email protected]

 Open the catalog to page 25
Vertical pumps „in-line” OPF type-26

Pump unit code www.hv.pl ul. Droga Jeziorna 8, 86-303 Grudzi^dz, Polska

 Open the catalog to page 26
Vertical pumps „in-line” OPF type-27

www.hv.pl [email protected]

 Open the catalog to page 27
Vertical pumps „in-line” OPF type-28

www.hv.pl [email protected]

 Open the catalog to page 28
Vertical pumps „in-line” OPF type-29

OPF.6 Pump unit code ul Droga Jeziorna 8, 86-303 Grudzi^dz, Polska www.hv.pl

 Open the catalog to page 29
Vertical pumps „in-line” OPF type-30

Q Capacity [m3/hr] www.hv.pl [email protected]

 Open the catalog to page 30
Vertical pumps „in-line” OPF type-31

www.hv.pl [email protected]

 Open the catalog to page 31
Vertical pumps „in-line” OPF type-32

DIMENSIONS Pump unit code www.hv.pl ul. Droga Jeziorna 8, 86-303 Grudzi^dz, Polska

 Open the catalog to page 32
Vertical pumps „in-line” OPF type-33

www.hv.pl [email protected]

 Open the catalog to page 33
Vertical pumps „in-line” OPF type-34

Q Capacity [m3/hr] www.hv.pl [email protected]

 Open the catalog to page 34
Vertical pumps „in-line” OPF type-35

DIMENSIONS Pump unit code HYDRO-VACUUM®s a ul Droga Jeziorna 8, 86-303 Grudzi^dz, Polska www.hv.pl

 Open the catalog to page 35
Vertical pumps „in-line” OPF type-36

Q Capacity [m3/hr] www.hv.pl [email protected]

 Open the catalog to page 36
Vertical pumps „in-line” OPF type-37

Pump unit code HYDRO-VACUUM®s a ul. Droga Jeziorna 8, 86-303 Grudzi^dz, Polska www.hv.pl

 Open the catalog to page 37
Vertical pumps „in-line” OPF type-38

Hydro-Vacuum S.A. I 150 years of experience I designed, manufactured and sold millions of pumps I thousands of satisfi ed clients in Poland and abroad

 Open the catalog to page 38

All Hydro-Vacuum catalogs and technical brochures

  1. Single-stage FZ type pumps Intermediate pumping PS type stations TS type sewage pumping stations with seperation of solids
    Single-stage FZ type pumps Intermediate pumping PS type stations TS type sewage pumping stations with seperation of solids

    86  Pages

  2. LCA pressure switches
    LCA pressure switches

    2  Pages

  3. Vertical „in-line” pumps type OPA, OPB
    Vertical „in-line” pumps type OPA, OPB

    22  Pages

  4. PW type vacuum pumps and DW type blowers
    PW type vacuum pumps and DW type blowers

    54  Pages

  5. Self-priming pumps
    Self-priming pumps

    84  Pages

  6. Deep-well pumps
    Deep-well pumps

    94  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.