C haracteristics of the m series motors Theoretical Max. allowable maximal power at pressure 400 bar continuous / peak (kW) (bar) Torque (N.m/bar) Continuous Intermittent max. max. speed (1) speed (1) (rpm) (rpm) Motor model Displacement (cc/rev) (1) For higher speeds, please contact us. (2) The M 108 R motor is in the frame size of the M 125. ►Acceptable forces applied to motor shaft Motor model Fr: radial force measured at mid point of length of shaft. Fa: axial force which tends to push the shaft inwards. * Differential pressure between A and B. For other forces, please contact us.

Order code system of M series motors ... To obtain the code for your motor, complete the different parameters 02, 04, 05, 07, 08, 09 and 10 in the table on the left according to the options you require (see table below). 0 = Without suitability for valves 1 = Compatible with flushing valve Drain ports T1 and T2 2 Suitable for use of speed sensor 07

M series motors CetoP flange, 2 bolts 79.1 ►Shaft end cylindrical keyed shaft Ø 18 AS 6 x 6 x 32 ►Inlet ports Rear threaded ports A and B G ½" Dimensions in mm are given only as a

Cylindrical keyed shaft Ø 20 DIN 6885 AS 6 x 6 x 32 +1 6 Cylindrical keyed shaft Ø 25 DIN 6885 AS 8 x 7 x 32 ►Inlet ports Side threaded ports A and B 123.4 Rear threaded ports A and B 143.3 M 22 x 1.5 Dimensions in mm are given only as an indica

Cylindrical keyed shaft Ø 25 DIN 6885 AS 8 x 7 x 40 +1 Cylindrical keyed shaft Ø 30 DIN 6885 AS 8 x 7 x 40 75 + 1 − 0.5 Dimensions in mm are given only as an indication.

►Inlet ports Rear threaded ports A and B Side threaded ports M series Rear flange ports A and B SAE 1/2″ 6000 psi Side threaded ports 120 Side flange ports A and B SAE 1/2″ 6000 psi Dimensions in mm are given only as an indication.

Cylindrical keyed shaft Ø 30 DIN 6885 AS 8 x 7 x 40 75 Cylindrical keyed shaft Ø 25 DIN 6885 AS 8 x 7 x 40 Not available P on M 41. 75 +1 − 0.5 Dimensions in mm are given only as an indication.

SAE flange ports, bottom SAE 1/2″ 6000 psi Rear flange ports SAE 1/2″ 6000 psi M8 depth 15 drilling depth 18 Side flange ports A and B SAE 1/2″ 6000 psi Side threaded ports A and B 120 Rear threaded ports Side threaded ports A and B 4.72 (120) Dimensions in mm are given only as an indication.

Cylindrical keyed shaft Ø 30 DIN 6885 AS 8 x 7 x 50 92 Cylindrical keyed shaft Ø 35 DIN 6885 AS 10 x 8 x 50 92 Dimensions in mm are given only as an indication.

SAE flange ports, bottom SAE 3/4″ 6000 psi SAE flange ports, rear SAE 3/4″ 6000 psi SAE flange ports, side A and B SAE 3/4″ 6000 psi 136 Rear threaded ports M33 x 2 depth 18 Side threaded ports A and B Side threaded ports A and B Dimensions in mm are given only as an indication.

Cylindrical keyed shaft Ø 40 DIN 6885 AS 12 x 8 x 56 102 Dimensions in mm are given only as an indication.

SAE flange ports, bottom SAE 1″ 6000 psi Rear threaded ports F SAE flange ports, rear SAE 1″ 6000 psi Side threaded ports SAE flange ports, rear SAE 1″ 6000 psi Side threaded ports Dimensions in mm are given only as an indication.

Cylindrical keyed shaft Ø 45 DIN 6885 AS 14 x 9 x 63 Cylindrical keyed shaft Ø 40 DIN 6885 AS 12 x 8 x 56 +1 Max. pressure 5076 (350 bar) for M 125. Dimensions in mm are given only as an indication.

SAE flange ports, bottom SAE 1¼″ 6000 psi 31.8 SAE flange ports, bottom SAE 1¼″ 6000 psi SAE flange ports, rear SAE 1¼″ 6000 psi SAE flange ports, rear SAE 1¼″ 6000 psi Dimensions in mm are given only as an indication.

Cylindrical keyed shaft Ø 50 DIN 6885 AS 14 x 9 x 70 Dimensions in mm are given only as an indication.

►Inlet ports SAE flange ports, bottom SAE 1¼″ 6000 psi 31.80 SAE flange ports, rear SAE 1¼″ 6000 psi Dimensions in mm are given only as an indication.