► Advantages LEDUC AP(L) piston accumulators, are designed: to withstand very high volumetric ratios to ensure total and rapid discharge of fluid for assembly in any position to guarantee minimal nitrogen loss overtime for easy adaptation for use with different fluids and temperatures. Maximum pressure: 350 bar Extreme operating temperatures : Standard version: – 20°C to + 80°C For other temperatures, please consult us. Maximum pressure: 250 bar Extreme operating temperatures : Standard version: – 20°C à + 80°C For other temperatures, please consult us. ► Movement of the piston ► Operating fluids Mineral-based hydraulic fluids Non-standard and/or corrosive fluids: please consult our Customer Service Department. AP(L) accumulators are designed with a high mechanical resistance forged steel body. The fluid-gas separating piston is equipped with seals adapted to: the fluids to convey the operating temperature. The AP(L) accumulators can be fitted with a charging screw or charging valve, and are a modern solution for the needs of hydraulic circuits. ► Example of applications E nergy sto rag e ► Filling gas Nitrogen only. ► Charging Two versions available: with charging screw with charging valve. For AP(L) series accumulators that are supplied pre-charged, P0 must be over 5 bar. ► Tests and certifications Designed and certified according to the European Directive 2014/68

AP(L) Characteristics and dimensions M28 x 1.5 Charging screw or charging valve (1) (1) See order code system code 06 (next page) (2) Hydraulic connections - see order code system code 05 (next page) CHARACTERISTICS AND DIMENSIONS Volume (L)

AP(L) Order code system To obtain the code of your piston accumulator AP(L), complete the different parameters from 01 to 08 in the table on the left according to the options you require (see table below). Double sealing Fluid side connection Male M33x1.5 Female G1/2’’ Gas side connection M28 x 1.5 screw

AP(L) | Fluid connections ► Hydraulic connections - Code without fitting without fitting

► Gas side connexion - Code

► Adjustable clamps Model Stainless steel Zinc-plated steel Stainless steel Tightening torque of the fixation screws: 20 N.m. Zinc-plated steel Zinc-plated steel quick tightening Stainless steel Zinc-plated steel quick tightening Zinc-plated steel Stainless steel Characteristics Zinc-pl