Up-Flo Filter

Up-Flo Filter

Up-Flo Filter

Product catalog summary
Product Overview
The Up-Flo™ Filter is a high-efficiency stormwater filtration system designed to remove trash, sediments, nutrients, metals, and hydrocarbons from stormwater runoff. It is the only fluidised bed up flow filtration technology in the industry, offering superior treatment, filtration rate, and media longevity compared to other systems.
Key Features
  • Available in manhole, vault, and retrofit configurations.
  • High flow capacity allows for smaller system footprints.
  • Includes 4 mm pre-screening and a variety of media options.
  • Patented drain down prevents media degradation.
  • Long media life and easy maintenance.
Applications
  • New developments and retrofits.
  • Sustainable Urban Drainage Systems (SUDS).
  • Industrial and commercial facilities.
  • Source control and sediment/hydrocarbon management.
  • Nutrient and heavy metals control.
  • Wetlands protection and eco-developments.
Operation
Stormwater enters the chamber, where debris settles in the sump, and oils rise to the surface. Water flows up through an angled screen, preventing large materials from reaching the filter media. Treated water is then directed to the outlet module. Excess flows during extreme storms are managed by a siphonic bypass with a floatables baffle.
Maintenance
Maintenance involves easy access to the sump and replaceable Media Packs. A vacuum tanker removes sediment, and Media Packs are manually replaced without heavy lifting equipment.
Filter Media Options
  • Filter Sand: Removes TSS, nutrients, metals, and bacteria.
  • Perlite: Targets TSS, oils, and grease.
  • CPZ™ Mix: Effective for TSS, nutrients, bacteria, metals, and organics.
  • CPS™ Mix: A cold climate alternative to CPZ™ Mix.
Configurations
  • 1 Ring (Standard Manhole): Suitable for small drainage sites with a treatment flow of 9 l/s.
  • 2 Ring (Vault): For larger catchments with a treatment flow of 18 l/s.
  • 3 Ring (Vault): For even larger catchments with a treatment flow of 28 l/s.
  • Up-Flo™ Retro: Designed for retrofit applications in small or irregular catch basins.
Technical Specifications
Each filter module has a typical treatment flow of 1.6 l/s. The system's design allows for a peak siphonic bypass flow and accommodates various pipe diameters and headloss requirements.
See more

Catalog excerpts

Up-Flo Filter-1

stormwater Up-Flo™ Filter Fluidised Bed Up Flow Filtration System Stormwater Filtration in less than one fifth of the footprint of other filtration devices. Product Profile Applications • New developments and retrofits. • SUDS schemes. • Industrial and commercial facilities. • Source control. • Sediment and hydrocarbon control. • Nutrient control. • Heavy metals control. • Wetlands protection. • Eco-developments. The Up-Flo™ Filter is the most efficient high rate stormwater filtration Available in manhole, vault and retrofit configurations. • and hydrocarbons from stormwater runoff. As the industry’s only fluidised bed up flow filtration technology, the Up-Flo™ Filter provides a higher level of treatment, a higher rate of filtration, longer life of filter media and a longer maintenance cycle than other filter systems. Bypass Siphon with Floatables Baffle Advantages • technology available for the removal of trash, sediments, nutrients, metals High flow capacity resulting in smaller Outlet Module with Integral Drain Down Port Outlet Pipe systems. • Includes 4 mm pre-screening. • Variety of media options. • Inlet Pipe Patented drain down prevents media Media Pack Filter Module Angled Screen Sump degradation. • Long media life and maintenance cycle. • Easy installation and maintenance. How it Works Stormwater enters the chamber via an inlet pipe or inlet grate and is directed between the filter modules to the sump of the chamber (brown arrow). Gross debris and sediment settle out in the sump, while oil and floatables rise to the surface of the water. As water fills the chamber, the flow is directed up through the angled screen (yellow arrow) preventing larger material from reaching the filter media. Flow distributing media spreads the flow evenly across the filter media as the water level increases within the chamber (green arrows). Treated water enters a conveyance channel at the top of the filter module, where it is directed to the outlet module and passes forward to the outlet pipe (blue arrows). Excess flows associated with extreme storm events are discharged directly to the outlet module via a siphonic bypass, which incorporates a floatables baffle to prevent the discharge of oils and floatable material. Following the storm event, water drains out of the chamber through the patented drain down port. This backwashes the filter media and leaves it dry between storm events, preventing pollutant leaching and media degradation. Stormwater Hotline: 01275 337977 • www.hydro-international.biz turning water around ...®

 Open the catalog to page 1
Up-Flo Filter-2

S tor mw at er Up-Flo™ Filter Maintenance Filter Media Maintenance is simple with easy access to the sump and A portfolio of media is available to accommodate site specific replaceable Media Packs. A vacuum tanker is used to remove pollutant removal objectives. sediment and debris from the sump and the Media Packs • Filter Sand: TSS, particle-bound nutrients, metals and bacteria. are manually replaced. Unlike other filtration systems, no specialised heavy lifting equipment is needed. Filter Module Components • Perlite: TSS and associated pollutants, oils and grease. Each Filter Module has a typical...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.