stormwater Stormbloc® Inspect Stackable Modular Access Unit Unrivalled Accessibility for Stormbloc® Installations Product Profile The Stormbloc® Inspect offers an unrivalled level of accessibility to any Stormbloc® installation. This modular access chamber, sited within the tank, has identical dimensions to a Stormbloc® module and so can easily be incorporated into the layout of the infiltration or storage system. New Half Block Chamber A half sized Stormbloc® Inspect Chamber is now available, to fit with the Stormbloc® half blocks. Each Stormbloc® Inspect unit offers connection points on See over for dimensions. all four sides for direct access to the inspection tunnels on the Stormbloc® modules or for connection of inlet and outlet pipes to the system. Advantages • • The Stormbloc® Inspect has the same dimensions as the Stormbloc® modules and is fully stackable. Can be integrated within all Stormbloc® installations. The volume of Stormbloc® Inspect contributes to the required storage capacity. Each unit has an ‘inlet’ side for optimum pipe connection into and out of the Stormbloc® installation (up to 500 mm ID possible). High and low level inlet connections possible. Enables optimum accessibility for inspection and maintenance. Excellent access to the installation via 500 mm internal diameter extension shaft to ground level. Reduces need for separate manhole chambers. The use of a standard vented manhole cover in conjunction with the Stormbloc® Inspect unit removes the need for separate ventilation structures. Reduces installation time. • Reduces capital costs on overall project. • • • • • • • • CCTV Inside the Stormbloc® Inspect Chamber and Stormbloc® Tunnel turning water around ...® Stormwater Hotline: 01275 337977• www.hydro-international.biz

S tor mw at er Stormbloc® Inspect 2 Layer Stormbloc® Inspect with Optional Eye Level Inlet Stormbloc® Inspect Dimensions Extension Shaft Note: All dimensions shown in mm Half Block Optional Inlet 360° rotation Ventilation Upper Inlet Full Block Inspection Access Lower Inlet (Pipe Invert Level 40 mm Above Base of Unit) 800 800 mm mm Dimensions (mm) Weight (kg) Full Unit 800 x 800 x 660 24 Half Unit 800 x 800 x 350 15 Inlet / Outlet Inspection Options 3) 1) 2) 3) 1) 2) 1) Stormbloc Inspect units can be used as the main connection point for the inlet and outlet pipes. The pipe can be connected ®...