ZT-2200 (EZT ® )

Product catalog summary

Overview: The document describes the ZT-2200 (EZT®) integrated unit, highlighting its popularity and low-maintenance design. It features an internal mesh oil filter for extended life and an external cog brake for enhanced holding power. The unit is equipped with a durable 10cc pump and motor.

Specifications:

Pump and Motor Displacement: 0.61 in³/rev (10 cc/rev)
Input Speeds: Maximum Hi-idle (No Load) at 3000 rpm, Minimum (Loaded) at 1800 rpm
Output Torque: Up to 215 lb-ft (291 Nm)
Speed: Up to 7 mph (11 kph)
Gross Vehicle Weight: Up to 900 lbs (408 kg)
Axle Shaft Diameter: 1.0 in (25.4 mm)
Axle Shaft Options: Two-Flats, 4-bolt Flange
Weight of Unit: 29 lbs (13 kg)

Note: Specifications are subject to change without notice.

Additional Information: The unit is designed and assembled in the USA. For more details, visit www.hydro-gear.com.

Catalog excerpts

PERFORMER Our most popular integrated unit Low-maintenance design with an internal mesh oil filter for longer life External cog brake for maximum holding power Durable 10cc pump & 10cc motor

Open the catalog to page 1

[10 cc/rev] Input Speeds Max Hi-idle (No Load) 3000 rpm Output Torque up to 215 lb-ft [up to 11 kph] Gross Vehicle Weight up to 900 lbs [25.4 mm] Axle Shaft Options Two-Flats [13 kg] Specifications subject to change without notice FOR MORE INFORMATION VISIT: WWW.HYDRO-GEAR.COM

Open the catalog to page 2

ZT-2200 (EZT ® )

ZT-2200 (EZT ® )

Catalog excerpts

All Hydro-Gear catalogs and technical brochures