*mydirectindustry

PBVF-100D

Product catalog summary

Overview: The document provides a detailed overview of hydraulic and pneumatic products by Hydraulics International, Inc. (HII), including liquid pumps, gas boosters, air pressure amplifiers, and high-pressure valves. Each product category is described with specifications, benefits, and typical applications.

Liquid Pumps: These pumps are driven by air or gas and feature drive pistons directly connected to the pump plunger. They offer advantages such as start/stop under full load, no electrical hazards, and compatibility with various liquids. Models vary in pressure capabilities, with some reaching up to 80,000 PSI.

Gas Boosters: Available in air or gas-driven and electric-driven models, these boosters are designed for applications like bottled gas transfer and high-pressure gas testing. They ensure hydrocarbon-free gas output and are safe for use with flammable gases.

Air Pressure Amplifiers: These units amplify the pressure of the same gas used for drive, addressing low air pressure issues and providing higher test station air or nitrogen pressure. Models are available with pressures up to 1,250 PSI.

High-Pressure Valves: Various valve types are detailed, including relief, pilot cutoff, unloading, and check valves, suitable for high-pressure applications, handling pressures up to 60,000 PSI.

Packaged Systems: HII offers packaged systems for both liquid and gas applications, including high-pressure O2/N2 units and air amplifiers with integrated controls.

Flow Meters: The document covers flow meters for liquid and gas, highlighting features like totalizing, rate display, and explosion-proof design.

Specifications and Controls: Detailed specifications for electric-driven booster systems are provided, including motor details, noise levels, and operating speeds. Control options include automatic pressure limit switches and manual start/stop switches.

Applications: Typical applications include hydrostatic testing, hydraulic clamps, valve actuators, and portable tools for high-pressure hydraulics.

Specifications: The document outlines specifications for different models of valves and boosters, including maximum air valve pressure (120 PSI), materials (stainless steel alloys), and seal options (Buna, Viton, EPR). Various models with respective pressure ranges, port sizes, and configurations are listed.

Procedures and Applications: The operation of air-driven gas boosters is described, used to increase gas pressure from as low as 400 psi to 5000 psi, suitable for general aviation, municipal fire services, rescue operations, and diving. They operate dry and hydrocarbon-free, ensuring contamination-free output.

Key Features and Benefits: Boosters offer features such as holding pressure without consuming power, intrinsic safety due to compressed air operation, and contamination-free separation between drive and gas sections. Optional controls include high-pressure air controls and oxygen fill accessory kits. The boosters increase system capacity and eliminate cascading.

Performance and Safety: Performance metrics such as fill times and rates for different system pressures are provided. Safety features include low and high-pressure pilot valves and outlet pressure relief valves, which automatically stop and restart the booster as needed.

Additional Information: Contact information for Hydraulics International, Inc., and references to additional literature and system packages available from the company are included.

Catalog excerpts

Air Driven Liquid Pumps Air Driven Compact Gas Boosters PRODUCT LINE OVERVIEW Flow Meters High Pressure Valves Electric Driven Gas Boosters Package Systems

Open the catalog to page 1

LIQUID PUMPS Drive Piston(s) (Diameter) Optional hand pump kit available. Basic Description and Benefits The drive piston(s) is directly connected to the pump plunger or piston, separated by a high pressure seal. When shop air (or gas) is applied, the assembly reciprocates automatically, producing a positive displacement pumping action at the liquid end. This pumping action will stall and hold pressure whenever the system down stream is closed. The final pressure is estimated by multiplying drive air pressure x the area ratio of each model. Drive air or gas can range from 3 to 150 PSI. Benefits:...

Open the catalog to page 2

AIR PRESSURE AMPLIFIERS AIR DRIVEN Drive Piston(s) (Diameter) Area Ratios, (Drive vs Boost Piston(s)) Basic Description and Benefits These units are simplified versions of HII’s gas booster design in that they are designed to boost (amplify) the pressure of the same gas (shop air) used for drive. Benefits: • Solve low air pressure problems at individual pneumatically actuated production machines. • Provide higher test station air or nitrogen pressure economically. HIGH PRESSURE VALVES Type Pilot Cutoff 11 Models Pressures to 20,000 PSI. Volumes to 900cu. inches LIQUID OR GAS Type Range Turbine...

Open the catalog to page 3

Detailed Literature Available elbaliavA erutaretiL deliateD Gas Boosters Electric Driven Principal of operation, features & benefits, applications, optional controls, dimensional data, performance curves and specifications. 4 Pages Principle of operation, applications, design features, flow ranges and sizing guides with calculations. How to order. 58 Pages Principle of operation, benefits. Applications, typical schematics, selection tables, performance curves and modifications. 14 Pages Hydra ulics Intern ationa l, SINGLE ACTING DOUBLE ACTING Hydraulics International air driven air pressure amplifiers...

Open the catalog to page 4

PBVF-100D

PBVF-100D

Catalog excerpts

All Hydraulics International catalogs and technical brochures