1. Catalogs
  2. Hydraulics International
  3. AIR DRIVEN GAS BOOSTERS LOW PRESSURE , HIGHT FLOW , OIL FREE

AIR DRIVEN GAS BOOSTERS LOW PRESSURE , HIGHT FLOW , OIL FREE

AIR DRIVEN GAS BOOSTERS LOW PRESSURE , HIGHT FLOW , OIL FREE

AIR DRIVEN GAS BOOSTERS LOW PRESSURE , HIGHT FLOW , OIL FREE

Product catalog summary
Overview: This document provides technical specifications and operational guidelines for air-driven gas boosters manufactured by Hydraulics International, Inc. These boosters are designed for use with liquified gases, vaporizers, and instrument air.
Specifications:
  • Models include 7G-DS-7, 7G-TS-7, 7LG-TS-7, 5LG-TS-4, and 7A-DS-8, each with specific applications such as boosting argon, nitrogen, and other gases, transferring liquefied gases, and backing up air-powered tools.
  • Drive pressure is set at 95 PSI, with a maximum boost section pressure of 1250 PSI.
  • Materials used include aluminum, stainless steel, PTFE, and Viton.
Principles of Operation:
  • The boosters operate with a double-acting drive piston connected to a boost piston, utilizing a spool type directional control valve and poppet type pilot valves for automatic reciprocation.
  • Double acting (DS) models provide output flow on both strokes, while two-stage (TS) models provide output only during the pull stroke.
  • Inlet pressure directly affects the boost piston area, with a pressure lift potential calculated by drive pressure multiplied by area ratio plus inlet pressure.
Performance and Safety:
  • Maximum pressure ratings are 150 PSI for the drive section and 1250 PSI for the boost section.
  • Safety relief valves are included to prevent excessive pressure, especially in TS models when boosting incompressible liquids.
  • Air drive consumption varies by model, with specific SCFM rates provided for different items.
Recommendations:
  • For liquified gas pumping, reduce drive speed to 30-35 cycles/min to maintain efficiency.
  • Ensure safety relief valves are set appropriately to prevent over-pressurization.
See more

Catalog excerpts

AIR DRIVEN GAS BOOSTERS LOW PRESSURE , HIGHT FLOW , OIL FREE-1

LOW PRESSURE, HIGH FLOW, OIL-FREE • Liquified gases at ambient temperature (both phases) • Vaporizers off cryogenic tanks • Instrument air (or plant air) ITEM MODEL ITEM MODEL M O D E L S E L E C T I O N – B A S II C D A T A MODEL SELECTION – BAS C DATA SCHEMATIC SCHEMATIC SYMBOL SYMBOL TYPICAL ACTUAL DISPL. PUMPING TYPICAL ACTUAL DISPL. PUMPING APPLICATION IN3 PER CYCLE ACTION APPLICATION IN PER CYCLE ACTION Boosting Argon, Nitrogen, Boosting Argon, Nitrogen, Oxygen, Hydrogen, Methane, Single Oxygen, Hydrogen, Methane, Single instrument air or similar gases 41.4 Stage, instrument air or similar gases 41.4 Stage, from 100 -- 400 PSI sources up up Double from 100 400 PSI sources Double to 700 -- 1100 PSI output at Acting to 700 1100 PSI output at Acting flows to 60 SCFM, oil free. flows to 60 SCFM, oil free. Boosting pure gases from low low Boosting pure pressure sources down to to pressure sources moderate vacuum while moderate vacuum providing 400 - 700 PSI gas gas providing 400 output, oil free. output, oil free. Driven by and Driven by and boosting 60 - 100 PSI plant 100 PSI plant compressed air air into 200 600 41.4 into 200 -- 600 PSI receivers 41.4 to back up air powered to back up air powered production machines or tools. production machines or tools. Transferring and extracting valuable Transferring and extracting valuable liquefied gases such as SF6, LPG 21.6 liquefied gases such as SF6, LPG 21.6 Halon, Freon from their liquid Two Halon, Freon from their liquid Two phase on down to the vapor phase on down to the vapor phase Stage phase Stage with moderate vacuum at inlet, while with moderate vacuum at inlet, while delivering up to 700 PSI output 12.0 delivering up to PSI with item 12.0 with item 4; 400 700 PSI output5. with item 4; 400 PSI with item 5. HYDRAULICS INTERNATIONAL, INC.® (HII) 9201 Independence Ave., Chatsworth, CA 91311 USA (Phone) 818.407.3400 | (Fax) 818.407.3428 APPROXIMATE LENGTH, APPROXIMATE LENGTH, HEIGHT, WIDTH, WEIGHT HEIGHT, WIDTH, WEIGHT Single Single Stage, 18” x x 11” x 9” Stage, 18” 11” x 9” Double Double 50 lbs. 50 lbs. Acting Acting 18” x x 11” x 15” 18” 11” x

 Open the catalog to page 1
AIR DRIVEN GAS BOOSTERS LOW PRESSURE , HIGHT FLOW , OIL FREE-2

PRINCIPLES OF OPERATION The basic unit consists of a large area double acting drive piston directly connected, through a high pressure seal and bearings, to a double acting boost piston. The drive section includes a spool type directional control valve and 2 poppet type pilot valves so that it will automatically reciprocate whenever compressed air (or a suitable gas) is applied to the drive port. Drive exhaust is routed to a muffler which is positioned near the finned gas section to enhance cooling. In the double acting (DS) models, the boost piston provides double acting output flow due to the...

 Open the catalog to page 2

All Hydraulics International catalogs and technical brochures

  1. GB505D

    2  Pages

  2. GB500E

    16  Pages

  3. PBVF-100D

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.