V3 100 LPM SECTIONAL SPOOL VALVE
18Pages

V3 100 LPM SECTIONAL SPOOL VALVE

V3-100 LPM SECTIONAL SPOOL VALVE Description The V3-100 sectional spool valve is one of the most compact 100 l/min valve available. Designed for pressures up to 250 bar the valve is available with two, three and four position spool control options and a range of spool types. The lever mechanism is a pressure die casting which totally encloses the spool for added protection. A range of optional ancillary valves are also available to be able to match the requirements of the most complicated and demanding circuits. The V3-100 is also available with solenoid control. It uses powerful yet...

Manual Section Solenoid Section Rated Flow 100 l/min 100 l/min Max pressure, service port 250 bar 250 bar Max pressure, inlet port 250 bar 210 bar Max back pressure, outlet port 35 bar 35 bar Temp rating: minimum -20°C -20°C Electrical Coil voltage nominal Coil power Connection Protection Cable 0 (not supplied) Recommended Oil Mineral based hydraulic ISO VG37 Filtration (minimum) 25 micron Materials Body - cast iron Manifold Tie studs M8 Tie studs torque Seals

3 MOUNTING HOLES Ø10.3 THRO 14.2mm 55.9mm WITH LEVER OVERRIDE COIL CONNECTIONS 5 SECTIONS & OVER No. OF SECTIONS x 44.45mm + 90mm

Tie Studs Inlet Covers Valve Sections Manual Page 83 Solenoid Page 84 Intersections Flow Controls Page 88 Series Plates Page 90 Levers Standard Page 85 Rotary Page 92 Outlet Covers Page 86 & 87

Material Cast Iron BS1452-250 Relief Valve Adjustable. Pilot Operated or Direct Acting. Pre-set 140bar unless stated Ports Top or Side entry G3/4 standard size Metric And SAE options available PORT POSITION TOP SIDE OPTION SETTING (BAR) WITH RELIEF VALVE R Pressurising Valve 17 Bar back pressure min. Options With Relief Valve (standard) No Relief Valve Closed Centre WITH RELIEF VALVE CLOSED CENTRE R NO RELIEF VALVE CLOSED CENTRE C Weight 1.88kg with Relief Valve 84

V3 MANUAL VALVE SECTION D C H ENVIRONMENTAL PROTECTION - page 87 Body Material Cast Iron BS1452-250 SPOOL CENTRING FUNCTION Spool Mild steel. Case hardened and ground Ports G3/4 standard size (options available) Environmental protection option Housing: Anodised Lever: Stainless steel 304 SPRING CENTRED 2 POSITION SPRING CENTRED SINGLE ACTING 'B' PORT 1 Weight 3.07kg with lever SINGLE ACTING 'A' PORT F

V3E SOLENOID VALVE SECTION E H S 12 VOLTAGE 12 12VDC 24 24VDC 110 110VAC ENVIRONMENTAL PROTECTION - page 10 CONTROL - page 10 SPOOL CENTRING SPRING CENTRED Body Material Cast Iron BS1452-250 DOUBLE ACTING Spool Mild steel. Case hardened and ground IF A DETENT FUNCTION IS REQUIRED THIS IS ACHIVED THROUGH THE SOLENOID SWITCHING MECHANISM Ports G3/4 standard size (options available) Weight 4.87kg with lever SINGLE ACTING 'A' PORT

SPECIFICATION Materials Housing: Aluminium LM24TF Actuator: Steel Nitro-carburised Pivot: Steel Hardened Fasteners: Deltatone Fixing 2x M6 Cap screw ( Torque - 10lbs/ft) Knob Black standard, Red, Blue, Green, Red, Yellow and Ident’ type available Options Standard or Multi-axis Aux cable attachment Environmental protection option Housing: Anodised Lever: Stainless steel 304 ENVIRONMENTAL PROTECTION ref pages 85 & 86 CONTROL STANDARD M MARINISED S STAINLESS LEVER H STANDARD LEVER

OUTLET COVER PORT POSITION TOP SIDE E 'ELECTRIC' EH 'ELECTRIC' -HP / LOW FLOW * EL 'ELECTRIC' - LP / HIGH FLOW * * SPECIAL - ONLY APPLICABLE IN CERTAIN APPLICATIONS - CONTACT US IF IN DOUBT STANDARD OUTLET SOLENOID RESTRICTOR PRESSURE CARRY-OVER OUTLET SULtNUID RESTRICTOR Standard Outlet Cover SPECIFICATION Material Cast Iron BS1452-250 Ports Top or Side entry G3/4 standard size G1, Metric And SAE options available Mounting 2 x 013.4mm Through Weight 1.88kg Options Standard Outlet (Tank port) Pressure Carry-Over (Tank port plus a Pressure port to feed further valves in the circuit)

OUTLET COVER E 'ELECTRIC' EH 'ELECTRIC' -HP / LOW FLOW * EL 'ELECTRIC' - LP / HIGH FLOW * * SPECIAL - ONLY APPLICABLE IN CERTAIN APPLICATIONS - CONTACT US IF IN DOUBT STANDARD OUTLET SOLENOID VRAELSVTERICTOR PRESSURE CARRY-OVER OUTLET I SOLENOID RESTRICTOR VALVE The V3E solenoid valve outlet cover contains a small restrictor valve which maintains a pressure for the solenoid oil-pilot valves. The restrictor valve is available with special options for certain low and high flow applications - contact us for details. The solenoid outlet cover must be used when a solenoid section is present in...

V3-100 FLOW CONTROL INTERSECTION A pressure compensated meter-in type flow control which can be included in V3-100 valve manual or solenoid assemblies. The regulated flow is supplied via the pressure gallery to ‘down stream’ sections, while ‘up stream’ are unaffected. The flow can be continuously adjusted using a knob or preset with a screw and lock nut. A relief valve can be fitted to protect the circuit. It has metering and environmental protect options. Description A meter-in type flow control intersection, which regulates flow to ‘down stream’ sections only. Pressure compensated, it...

Technical Data Performance Rated flow Adjustable range AP Inlet to outlet 40 l/min AP Inlet to service Maximum pressure Maximum back pressure Temperature rating min Temperature rating max Recommended Oil Mineral based hydraulic Filtration minimum Materials Body - Aluminium Needle - Stainless Steel External plating -Zinc chromate Seals Tie stud torque TYPICAL PERFORMANCE

SERIES CONNECTOR Hy-Pro series connectors are designed to be fitted between two valve sections, connecting in series the actuators that they control. Series connectors are often used to synchronize two hydraulic motors where the return oil from one is fed to the inlet of the second. The series connector effects only the valve sections immediately upstream and downstream of its position in the valve bank. Other sections remain connected in parallel. When using the series connectors, consideration must be given to upstream sections. This is because the normally open tank gallery in the...